Edelbrock

Edelbrock RPM Air-Gap AMC 304/360/401 Small Block V8 Intake Manifold - 7531

$504.95
$685.54 $504.95
Sale

Edelbrock RPM Air-Gap AMC Intake Manifold for AMC 304-360-401 Small-Block V8

Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil for a cooler, denser charge and more power. Includes standard oil fill and PCV provisions as well as early air conditioning support bracket accessory bosses. For square-bore carbs. No provision for exhaust-heated chokes. No exhaust crossover.

NOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.

PDF-Installation Instructions

SPECS

Manufacturer Edelbrock
Application Application Specific
UPC 00085347075317
Series RPM Air-Gap
Gasket Or Seal Included No
Vehicle Model AMC/Jeep
Availability Note Available to Order
Warranty 12 Months
Ec Basic Operating Rpm Range 1500-6500 RPM
Emissions Code
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Recommended intake gasket: Fel-Pro MS96011; Must use factory style metal valley tray; Has two center bolt holes offset; Manifold height: A-4.45", B-5.77"; Carb pad height: 5.11"; Carb recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm.; Port exit dimensions: 1.04" x 2.10"; Edelbrock bracket #8034 required for 1979 and later vehicles; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish Satin
Material Aluminum
Rear Maximum Height 5.770 in
Single Or Dual Plane Type Dual