Hawk Performance
Hawk Performance HP+ Brake Pads - HB518N.642
Hawk Performance HP Plus
The Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
Expert Opinion
HP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.
Hawk Performance HP Plus Compound Characteristics:
- Low to Mid Temperature Range
- Fade Resistant
- Smooth, Predictable Torque
- Ideal for Autocross
- 100-800 Deg F Operating Temperature Range
- 300-600 Deg F Optimal Temperature Range
Hawk Race Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Street Compounds
- Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
- Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
- DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
- Allow 15 minutes or more for the brake syst
This part is for the Rear of:
- 2010 BMW X3 xDrive30i 3.0L
- 2009 BMW X3 xDrive30i 3.0L
- 2008 BMW Z4 M Roadster 3.2L
- 2008 BMW Z4 M Coupe 3.2L
- 2008 BMW X3 3.0si 3.0L
- 2007 BMW Z4 M Roadster 3.2L
- 2007 BMW Z4 M Coupe 3.2L
- 2007 BMW X3 3.0si 3.0L
- 2006 BMW Z4 M Roadster 3.2L
- 2006 BMW Z4 M Coupe 3.2L
- 2006 BMW X5 4.8is 4.8L
- 2006 BMW X5 4.4i 4.4L
- 2006 BMW X5 3.0i 3.0L
- 2006 BMW X3 3.0i 3.0L
- 2006 BMW M3 Compeition
- 2006 BMW M3 Base 3.2L
- 2006 BMW 330Ci Base 3.0L
- 2005 Land Rover Range Rover HSE 4.4L
- 2005 BMW X5 4.8is 4.8L
- 2005 BMW X5 4.4i 4.4L
- 2005 BMW X5 3.0i 3.0L
- 2005 BMW X3 3.0i 3.0L
- 2005 BMW X3 2.5i 2.5L
- 2005 BMW M3 Competition
- 2005 BMW M3 Base 3.2L
- 2005 BMW 330xi Base 3.0L
- 2005 BMW 330i Base 3.0L
- 2005 BMW 330Ci Base 3.0L
- 2004 Land Rover Range Rover
- 2004 BMW X5 4.8is 4.8L
- 2004 BMW X5 4.4i 4.4L
- 2004 BMW X5 3.0i 3.0L
- 2004 BMW X3 3.0i 3.0L
- 2004 BMW X3 2.5i 2.5L
- 2004 BMW X3
- 2004 BMW M3 Base 3.2L
- 2004 BMW 330xi Base 3.0L
- 2004 BMW 330i Base 3.0L
- 2004 BMW 330Ci Base 3.0L
- 2003 Land Rover Range Rover
- 2003 BMW Z8 Base 5.0L
- 2003 BMW Z8 Alpina 4.8L
- 2003 BMW X5 IS
- 2003 BMW X5 4.6is 4.6L
- 2003 BMW X5 4.4i 4.4L
- 2003 BMW X5 3.0i 3.0L
- 2003 BMW X5
- 2003 BMW M5 Base 5.0L
- 2003 BMW M3 Base 3.2L
- 2003 BMW 330xi Base 3.0L
- 2003 BMW 330i Base 3.0L
- 2003 BMW 330Ci Base 3.0L
- 2002 BMW Z8 Base 5.0L
- 2002 BMW X5 4.6is 4.6L
- 2002 BMW X5 4.4i 4.4L
- 2002 BMW X5 3.0i 3.0L
- 2002 BMW M5 Base 5.0L
- 2002 BMW M3 Base 3.2L
- 2002 BMW 330xi Base 3.0L
- 2002 BMW 330i Base 3.0L
- 2002 BMW 330Ci Base 3.0L
- 2001 BMW Z8 Base 5.0L
- 2001 BMW X5 4.4i 4.4L
- 2001 BMW X5 3.0i 3.0L
- 2001 BMW M5 Base 5.0L
- 2001 BMW M3 Base 3.2L
- 2001 BMW 750iL Base 5.4L
- 2001 BMW 740iL Base 4.4L
- 2001 BMW 740i Base 4.4L
- 2001 BMW 330xi Base 3.0L
- 2001 BMW 330i Base 3.0L
- 2001 BMW 330Ci Base 3.0L
- 2000 BMW Z8 Base 5.0L
- 2000 BMW X5 4.4i 4.4L
- 2000 BMW M5 Base 5.0L
- 2000 BMW 750iL Base 5.4L
- 2000 BMW 740iL Base 4.4L
- 2000 BMW 740i Base 4.4L
- 1999 BMW 750iL Base 5.4L Standard Brakes
- 1999 BMW 750iL Base 5.4L Optional Brakes
- 1999 BMW 740iL Base 4.4L Standard Brakes
- 1999 BMW 740iL Base 4.4L Optional Brakes
- 1999 BMW 740i Base 4.4L
- 1998 BMW 750iL Base 5.4L
- 1998 BMW 740iL Base 4.4L
- 1998 BMW 740i Base 4.4L
- 1997 BMW 750iL Base 5.4L
- 1997 BMW 740iL Base 4.4L
- 1997 BMW 740i Base 4.4L
- 1996 BMW 750iL Base 5.4L
- 1996 BMW 740iL Base 4.4L
- 1995 BMW 750iL Base 5.4L
- 1995 BMW 740iL Base 4.0L
- 1995 BMW 740i Base 4.0L