Turbosmart

Turbosmart BlackBox Electronic Wastegate Controller

$594.95
$661.06 $594.95
Sold out

BlackBox by Turbosmart is a dedicated Electronic Wastegate Controller. The BlackBox protects from the current demands and translation of basic and more advanced boost control strategies into a gate position and can be used on single or twin electronic wastegate systems for the ultimate boost control. They are used in cooperation with a range of Factory, Aftermarket and Motorsport ECU.

The BlackBox is a Dual Channel, High current Capable H-Bridge Driver for use with the Turbosmart range of Electronic External Wastegates, including the StraightGate50 and our Electronic poppet style gates including; CompGate40, HyperGate45, ProGate50 and PowerGate60 electronic Wastegates

 

The BlackBox is capable of multiple strategies and will accept PWM (Pulse Width Modulation) inputs as traditional boost control solenoids, 0-5v position target CAN position target and CAN bus override for more advanced ECU’s where control strategy can be developed natively. The Blackbox auto-calibration of Electronic External Wastegates via a full sweep and includes over-temp safety features using the temperature sensor inputs.

The BlackBox is pre-configured with the flow vs. lift calibration data of all Electronic Actuatuated Wastegates from Turbosmart for simple setup and accurate boost control. Settings can be adjusted via a simple USB connection and PC-based application. Unlimited control strategies can be implemented with the CAN-based override system, limiting your strategy only by your ECU’s capability.

Compatible With:


StraightGate50
GenV Electronic CompGate40 eWG40
GenV Electronic HyperGate45 eWG45
GenV Electronic ProGate50 eWG50
GenV Electronic PowerGate60 eWG60

Features Include:

  • Dual-Channel High Current H-Bridge Outputs
  • 2 x Wastegate Valve Position Inputs (0-5v)
  • 2 x Wastegate Temperature Inputs (0-5v)
  • 2 x Frequency Inputs (Advanced Wastegate Position Encoder)
  • PWM Target Position Input 
  • Analog 0-5v Position Target
  • CAN Bus Position Demand Target
  • CAN Bus Valve Area Target
  • CAN Bus Programmable PID Mode Option
  • Factory Loaded PID Calibration for all Turbosmart eGates
  • Internal Over-Current Protection
  • Internal Over-Temp Protection
  • Auto Position Calibration
  • Anodized Aluminium Housing
  • 34 Pin Superseal Connector