Edelbrock Performer EPS Intake Manifold for 1955-86 262-400 Small-Block Chevrolet V8, Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.
Edelbrock part #2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most.
SPECS
| Manufacturer | Edelbrock |
|---|---|
| Application | Application Specific |
| UPC | 00085347027019 |
| Series | Performer |
| Grade Type | Performance |
| Gasket Or Seal Included | No |
| Vehicle Model | Chevrolet |
| Availability Note | Available to Order |
| Warranty | 12 Months |
| Ec Basic Operating Rpm Range | Idle-5500 RPM |
| Emissions Code | |
| Hazardous Materials Warning | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Installation Notes |
|
| Color | Satin |
| Finish | Satin |
| Material | Aluminum |
| Rear Maximum Height | 4.800 in |
| Single Or Dual Plane Type | Dual |