Hawk Performance HP Plus
The Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
Expert Opinion
HP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.
Hawk Performance HP Plus Compound Characteristics:
- Low to Mid Temperature Range
- Fade Resistant
- Smooth, Predictable Torque
- Ideal for Autocross
- 100-800 Deg F Operating Temperature Range
- 300-600 Deg F Optimal Temperature Range
Hawk Race Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Street Compounds
- Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
- Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
- DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
- Allow 15 minutes or more for the brake system to cool down.
- Your new Hawk pads are ready for use.
This part is for the Front of:
- 2004 Ford Mustang SVT Cobra 4.6L
- 2004 Ford Mustang Mach I 4.6L
- 2004 Ford Mustang Cobra
- 2003 Ford Mustang SVT Cobra 4.6L
- 2003 Ford Mustang SVT Cobra 10th Anniversary 4.6L
- 2003 Ford Mustang Mach I 4.6L
- 2003 Ford Mustang Cobra
- 2002 Ford Mustang Cobra
- 2001 Ford Mustang SVT Cobra 4.6L
- 2001 Ford Mustang GT Bullitt 4.6L
- 2000 Ford Mustang Cobra
- 1999 Ford Mustang SVT Cobra 5.0L
- 1998 Ford Mustang SVT Cobra 5.0L
- 1997 Ford Mustang SVT Cobra 4.6L
- 1996 Ford Mustang SVT Cobra 4.6L
- 1996 Chevrolet Corvette Grand Sport 5.7L
- 1996 Chevrolet Corvette Collector's Edition 5.7L
- 1996 Chevrolet Corvette Base 5.7L
- 1996 Chevrolet CORVETTE
- 1995 Ford Mustang SVT Cobra 4.6L
- 1995 Chevrolet Corvette ZR-1 5.7L
- 1995 Chevrolet Corvette Indianapolis 500 Pace Car 5.7L
- 1995 Chevrolet Corvette Base 5.7L
- 1995 Chevrolet Corvette
- 1994 Ford Mustang SVT Cobra 4.6L
- 1994 Chevrolet Corvette ZR-1 5.7L
- 1994 Chevrolet Corvette Base 5.7L
- 1994 Chevrolet Corvette
- 1993 Chevrolet Corvette ZR-1 5.7L
- 1993 Chevrolet Corvette Base 5.7L
- 1993 Chevrolet Corvette 40th Anniversary Edition 5.7L
- 1993 Chevrolet Corvette
- 1992 Pontiac Firebird Heavy Duty
- 1992 Chevrolet Corvette ZR-1 5.7L
- 1992 Chevrolet Corvette Base 5.7L
- 1992 Chevrolet Corvette
- 1992 Chevrolet Camaro Heavy Duty
- 1992 Chevrolet Camaro 5.7L Performance Package
- 1992 Chevrolet Camaro 5.0L Performance Package
- 1992 Chevrolet Camaro 3.1L Performance Package
- 1991 Pontiac Firebird Heavy Duty
- 1991 Chevrolet Corvette ZR-1 5.7L
- 1991 Chevrolet Corvette Base 5.7L
- 1991 Chevrolet Corvette
- 1991 Chevrolet Camaro Heritage Edition 5.0L Performance Package
- 1991 Chevrolet Camaro Heritage Edition 3.1L Performance Package
- 1991 Chevrolet Camaro Heavy Duty
- 1991 Chevrolet Camaro 5.7L Performance Package
- 1991 Chevrolet Camaro 5.0L Performance Package
- 1990 Pontiac Firebird Heavy Duty
- 1990 Chevrolet Corvette ZR-1 5.7L
- 1990 Chevrolet Corvette Base 5.7L
- 1990 Chevrolet Corvette
- 1990 Chevrolet Camaro Heavy Duty
- 1990 Chevrolet Camaro 5.7L Performance Package
- 1990 Chevrolet Camaro 5.0L Performance Package
- 1990 Chevrolet Camaro 3.1L Performance Package
- 1989 Pontiac Firebird Heavy Duty
- 1989 Chevrolet Corvette Base 5.7L
- 1989 Chevrolet Corvette
- 1989 Chevrolet Camaro Heavy Duty
- 1989 Chevrolet Camaro 5.7L Performance Package
- 1989 Chevrolet Camaro 5.0L Performance Package
- 1989 Chevrolet Camaro 2.8L Performance Package
- 1988 Pontiac Firebird Heavy Duty
- 1988 Chevrolet Corvette Base 5.7L
- 1988 Chevrolet Corvette 35th Anniversary Edition 5.7L
- 1988 Chevrolet Corvette
- 1988 Chevrolet Camaro Heavy Duty
- 1988 Chevrolet Camaro 5.7L Performance Package
- 1988 Chevrolet Camaro 5.0L Performance Package
- 1988 Chevrolet Camaro 2.8L Performance Package
This part is for the Rear of:
- 1996 Chevrolet Corvette Grand Sport
- 1996 Chevrolet Corvette Base
- 1995 Chevrolet Corvette ZR-1
- 1995 Chevrolet Corvette Indianapolis 500 Pace Car
- 1995 Chevrolet Corvette Base
- 1994 Chevrolet Corvette ZR-1
- 1994 Chevrolet Corvette Base
- 1993 Chevrolet Corvette ZR-1
- 1993 Chevrolet Corvette Base
- 1993 Chevrolet Corvette 40th Anniversary Edition
- 1992 Chevrolet Corvette ZR-1
- 1992 Chevrolet Corvette Base
- 1991 Chevrolet Corvette ZR-1
- 1991 Chevrolet Corvette Base
- 1990 Chevrolet Corvette ZR-1
- 1990 Chevrolet Corvette Base
- 1989 Chevrolet Corvette Base