Hawk Performance HP Plus
The Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
Expert Opinion
HP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.
Hawk Performance HP Plus Compound Characteristics:
- Low to Mid Temperature Range
- Fade Resistant
- Smooth, Predictable Torque
- Ideal for Autocross
- 100-800 Deg F Operating Temperature Range
- 300-600 Deg F Optimal Temperature Range
Hawk Race Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Street Compounds
- Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
- Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
- DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
- Allow 15 minutes or more for the brake system to cool down.
- Your new Hawk pads are ready for use.
This part is for the Front of:
- 2013 Chevrolet Corvette Heavy Duty
- 2013 Chevrolet Corvette Base 6.2L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2013 Chevrolet Corvette Base 6.2L Exc.Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2012 Chevrolet Corvette Heavy Duty
- 2012 Chevrolet Corvette Base 6.2L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2012 Chevrolet Corvette Base 6.2L Exc.Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2012 Chevrolet Corvette
- 2011 Chevrolet Corvette Heavy Duty
- 2011 Chevrolet Corvette Base 6.2L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2011 Chevrolet Corvette Base 6.2L Exc.Heavy Duty Brakes, OE Incl.Clips, Outer Pin Bolt
- 2011 Chevrolet Corvette
- 2010 Chevrolet Corvette Heavy Duty
- 2010 Chevrolet Corvette Base 6.2L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2010 Chevrolet Corvette Base 6.2L Exc.Heavy Duty Brakes, OE Incl.Clips, Outer Pin Bolt
- 2010 Chevrolet Corvette
- 2009 Chevrolet Corvette Heavy Duty
- 2009 Chevrolet Corvette Base 6.2L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2009 Chevrolet Corvette Base 6.2L Exc.Heavy Duty Brakes, OE Incl.Clips, Outer Pin Bolt
- 2009 Chevrolet Corvette
- 2009 Cadillac XLR Heavy Duty
- 2009 Cadillac XLR
- 2008 Chevrolet Corvette Heavy Duty
- 2008 Chevrolet Corvette Base 6.2L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2008 Chevrolet Corvette Base 6.2L Exc.Heavy Duty Brakes, OE Incl.Clips, Outer Pin Bolt
- 2008 Chevrolet Corvette
- 2008 Cadillac XLR Heavy Duty
- 2008 Cadillac XLR
- 2007 Chevrolet Corvette Heavy Duty
- 2007 Chevrolet Corvette Base 6.0L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2007 Chevrolet Corvette Base 6.0L Exc.Heavy Duty Brakes, OE Incl.Clips, Outer Pin Bolt
- 2007 Chevrolet Corvette
- 2007 Cadillac XLR Heavy Duty
- 2007 Cadillac XLR
- 2006 Chevrolet Corvette Heavy Duty
- 2006 Chevrolet Corvette Base 6.0L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2006 Chevrolet Corvette Base 6.0L Exc.Heavy Duty Brakes, OE Incl.Clips, Outer Pin Bolt
- 2006 Chevrolet Corvette
- 2006 Cadillac XLR Heavy Duty
- 2006 Cadillac XLR
- 2005 Chevrolet Corvette Heavy Duty
- 2005 Chevrolet Corvette Base 6.0L Heavy Duty Brakes, OE Incl.Clips, Guide Pin Bolt
- 2005 Chevrolet Corvette Base 6.0L Exc.Heavy Duty Brakes, OE Incl.Clips, Outer Pin Bolt
- 2005 Chevrolet Corvette
- 2005 Cadillac XLR
- 2004 Chevrolet Corvette Z06 5.7L
- 2004 Chevrolet Corvette Base 5.7L
- 2004 Chevrolet CORVETTE
- 2004 Cadillac XLR
- 2003 Chevrolet Corvette Z06 5.7L
- 2003 Chevrolet Corvette Base 5.7L
- 2003 Chevrolet Corvette 50th Anniversary Edition Pace Car 5.7L
- 2003 Chevrolet Corvette 50th Anniversary Edition 5.7L
- 2003 Chevrolet CORVETTE
- 2002 Chevrolet Corvette Z06 5.7L
- 2002 Chevrolet Corvette Base 5.7L
- 2002 Chevrolet CORVETTE
- 2001 Chevrolet Corvette Z06 5.7L
- 2001 Chevrolet Corvette Base 5.7L
- 2001 Chevrolet CORVETTE
- 2000 Chevrolet Corvette Base 5.7L
- 2000 Chevrolet CORVETTE
- 1999 Chevrolet Corvette Base 5.7L
- 1999 Chevrolet CORVETTE
- 1998 Chevrolet Corvette Indianapolis 500 Pace Car 5.7L
- 1998 Chevrolet Corvette Base 5.7L
- 1998 Chevrolet CORVETTE
- 1997 Chevrolet Corvette Base 5.7L
- 1997 Chevrolet CORVETTE