Synergy 07-18 Jeep Wrangler JK/JKU Weld-On Rear Track Bar Bracket

$91.67
$91.67
$0
Sold out
Quantity must be 1 or more

Synergy Jeep JK Weld-On Rear Track Bar Bracket

Description

  • Synergy JK Weld-On Rear Track-Bar Bracket
  • Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
  • Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
  • Multiple Track-bar holes for suspension adjustments
  • Designed to fit stock JK axle tubes, 3.150" diameter
  • Will fit other diameter axle tubes with minor trimming
  • Track bar relocation bolt holes are 2.900", 3.713", and 4.525" above the stock track bar mounting location.

Note: Requires the use of a minimum 3" bump stop spacer

Note: This bracket requires the use of a minimum 3" rear bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used

Go to full site