{"title":"BMR Lowering Springs","description":"\u003cp\u003eShop BMR lowering springs for improved stance, reduced wheel gap, sharper handling, and better suspension response on performance street cars, drag cars, autocross cars, and modern muscle platforms. BMR lowering springs are designed to lower ride height while helping the vehicle feel more planted during acceleration, cornering, and aggressive driving. These springs are popular for Mustang, Camaro, Challenger, Charger, G8, GTO, Corvette, and other performance vehicles where stance and handling both matter. This collection is a strong fit for drivers looking to replace factory springs, clean up wheel gap, lower the center of gravity, or build a more aggressive street, strip, or handling-focused suspension setup.\u003c\/p\u003e","products":[{"product_id":"bmr-93-02-f-body-lowering-spring-kit-set-of-4-red","title":"BMR SET 1.25\" LOWERING SPRINGS RED (93-02 CAMARO) SP001R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your F-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP001 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your GM F-body 1.25-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP001 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A. Front spring rates - 550 lbs\/in linear Rear spring rates - 160 lbs\/in dual rate\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your Camaro 1.25-inches\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995930718376,"sku":"BMRSP001R","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/454efd559d895a1c732944348beb7cb2.jpg?v=1604919332"},{"product_id":"bmr-82-02-3rd-gen-f-body-rear-lowering-springs-red","title":"BMR 82-02 3RD GEN F-BODY REAR LOWERING SPRINGS - RED ( 1982-2002 ) SP003R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your F-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP003 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the rear of your GM F-body 1.25-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear working spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP003 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your Camaro 1.25-inches\u003cbr\u003e- Designed for street performance applications\u003cbr\u003e- 160-lb\/in spring rate\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1982 - 2002\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eF-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\n\u003cstrong\u003eAvailable\u003c\/strong\u003e \u003cstrong\u003eColors\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995931046056,"sku":"BMRSP003R","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/ace67adc45829158842fec7a7a35f9b1.jpg?v=1604919335"},{"product_id":"bmr-05-14-s197-mustang-gt-performance-version-set-of-4-red","title":"BMR LOWERING SPRINGS 1.5\" DROP RED (05-14 MUSTANG) SP009R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S197 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP009 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your S197 Mustang 1.5-inches, and feature a fine-tuned spring rate (165lb front, 160lb rear) to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR rear springs retain the factory \"hourglass\" shape designed by Ford engineers. This important feature provides a \"variable natural frequency\" in the spring to help counteract damaging wheelhop. This is a feature of the OE springs often overlooked by other companies simply because they don't realize it's benefits in multi-purpose applications. BMR Suspension’s SP009 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your S197 Mustang 1.5-inches\u003cbr\u003e- 165lb front spring rate\u003cbr\u003e- 160lb rear spring rate\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2005 - 2014\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP009.pdf\" target=\"_blank\"\u003eSP009 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995931209896,"sku":"BMRSP009R","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/f983057bb7f9046e96832e45018def3c.jpg?v=1604919338"},{"product_id":"bmr-05-14-s197-mustang-gt-gt500-rear-performance-drag-lowering-springs-red","title":"BMR LOWERING\/DRAG SPRINGS 1.5\" DROP REAR RED (05-14 MUSTANG) SP012R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S197 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP012 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your S197 Mustang 1.5-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP012 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your S197 Mustang 1.5-inches\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2005 - 2014\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP012.pdf\" target=\"_blank\"\u003eSP012 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995931766952,"sku":"BMRSP012R","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/3f24ff0b7127cc81370a159e675637b1.jpg?v=1604919342"},{"product_id":"bmr-64-72-a-body-front-lowering-springs-red","title":"BMR 1\" FRONT LOWERING SPRINGS - RED (64-72 A-BODY) SP013","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP013 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your 1964-1972 GM A-body 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP013 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the front of your 1964-1972 GM A-body 1-inch\u003cbr\u003e- Linear 521lb\/in spring rate\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1964 - 1972\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eA-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eAvailable Colors\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995932127400,"sku":"BMRSP013R","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/SP013_large_7aae7613-957b-462a-9aed-ff9de1d654f0.jpg?v=1733830885"},{"product_id":"bmr-67-72-a-body-rear-lowering-springs-red","title":"BMR 1\" REAR LOWERING SPRINGS - RED (67-72 A-BODY) SP014","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP014 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your 1967-1972 GM A-body 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The Variable spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP014 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your 1967-1972 GM A-body 1-inch\u003cbr\u003e- Variable 125-200 lb\/in spring rate\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1967 - 1972\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eA-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eAvailable Colors\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995933372584,"sku":"BMRSP014R","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/bc9218a3e2748e666a0d84a2ba1fab30.jpg?v=1604919348"},{"product_id":"bmr-67-72-a-body-rear-lowering-springs-red-1","title":"BMR 2\" REAR LOWERING SPRINGS - RED (67-72 A-BODY) SP015R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP015 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the rear end of your 1967-1972 GM A-body 2-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP015 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your 1967-1972 GM A-body 2-inch\u003cbr\u003e- Variable 125-200 lb\/in spring rate\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1967 - 1972\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eA-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995934093480,"sku":"BMRSP015R","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/a3589baeb5e9b5f82227b89477507876.jpg?v=1604919351"},{"product_id":"bmr-10-15-5th-gen-camaro-v8-lowering-spring-kit-set-of-4-red","title":"BMR SET 1.0\" LOWERING SPRINGS - RED (10-15 CAMARO V8) SP019R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2010 - 2015 Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP019 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your V-8-equipped 2010 - 2015 Camaro 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP019 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your V-8-equipped 2010 - 2015 Camaro 1-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 220 lb\/in front, 460 lb\/in rear spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Fits V8 Models Only\u003cbr\u003e- Not recommended for convertibles\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2010 - 2015\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP019.pdf\" target=\"_blank\"\u003eSP019 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995934552232,"sku":"BMRSP019R","price":319.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/dd4d4080e6c5a41a1530e0be03546020.jpg?v=1604919354"},{"product_id":"bmr-10-15-5th-gen-camaro-v8-lowering-spring-kit-set-of-4-red-1","title":"BMR SET 1.4\" LOWERING SPRINGS - RED (10-15 CAMARO V8) SP022R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2010 - 2015 Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP022 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your V-8-equipped 2010 - 2015 Camaro 1.4-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP022 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your V-8-equipped 2010 - 2015 Camaro 1.4-inches\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 220 lb\/in front, 460 lb\/in rear spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Fits V8 Models Only\u003cbr\u003e- Not recommended for convertibles\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2010 - 2015\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP022.pdf\" target=\"_blank\"\u003eSP022 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995935076520,"sku":"BMRSP022R","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/cf87641b609f3cf793f45d0180dadd26.jpg?v=1604919357"},{"product_id":"bmr-10-15-5th-gen-camaro-v8-lowering-spring-kit-set-of-4-front-red","title":"BMR SET 1.4\"\/1\" LOWERING SPRINGS - RED (10-15 CAMARO V8) SP025R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP025 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your V-8-equipped 2010 and newer Camaro 1.4-inches front\/1-inch rear, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP025 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your V-8-equipped 2010 and newer Camaro 1.4-inches front, 1-inch rear\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 220 lb\/in front, 460 lb\/in rear spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Fits V8 Models Only\u003cbr\u003e- Not recommended for convertibles\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2010 - 2015\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP025.pdf\" target=\"_blank\"\u003eSP025 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995935535272,"sku":"BMRSP025R","price":319.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/479c451445e01f66339959a2a7d8edb0.jpg?v=1604919361"},{"product_id":"bmr-79-04-fox-mustang-rear-lowering-springs-red","title":"BMR REAR 1\" LOWERING SPRINGS RED (79-04 MUSTANG) SP029R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 1979-2004 Mustang needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP029 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the rear of your 1979-2004 Ford Mustang 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP029 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. ***Will not work with 1999-2004 Ford Mustang Cobras with independent rear suspension***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your 1979-2004 Mustang 1-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 235 lb\/in spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1979 - 2004\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP029.pdf\" target=\"_blank\"\u003eSP029 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995936288936,"sku":"BMRSP029R","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/989e33859cf9bd123bef38c5642e47c1.jpg?v=1604919364"},{"product_id":"bmr-67-72-a-body-lowering-spring-kit-set-of-4-red","title":"BMR 2\" LOWERING SPRING KIT - RED (67-72 A-BODY) SP031R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP031 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your 1967-1972 GM A-body 2-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP031 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your 1967-1972 GM A-body 2-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1967 - 1972\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eA-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003cspan class=\"nobr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995936813224,"sku":"BMRSP031R","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/c45bd30d7f8e5637feb42b534f79e9fd.jpg?v=1604919367"},{"product_id":"bmr-78-87-g-body-lowering-spring-kit-set-of-4-red","title":"BMR 1.5\" LOWERING SPRING KIT RED (78-87 G-BODY) SP035 SP035R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM G-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP035 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your 1978-1987 GM G-body 1.5-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear rate (front) and dual rate (rear) springs offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP035 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your 1978-1987 GM G-body 1.5-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1978 - 1987\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eG-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995937697960,"sku":"BMRSP035R","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/78e27f1a57882bc6581641455d8fd9d8.jpg?v=1604919370"},{"product_id":"bmr-78-87-g-body-rear-lowering-springs-red","title":"BMR 1.5\" REAR LOWERING SPRINGS RED (78-87 G-BODY) SP037","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM G-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP037 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the rear end of your 1978-1987 GM G-body 1.5-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The dual rate springs offer plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP037 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your 1978-1987 GM G-body 1.5-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e- Does not work for Station Wagons\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1978 - 1987\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eG-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995938353320,"sku":"BMRSP037R","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/bad39ce6e7842c5d9bfa5c3f6aa9cf25.jpg?v=1604919373"},{"product_id":"bmr-16-17-6th-gen-camaro-v8-performance-version-lowering-springs-set-of-4-red","title":"BMR LOWERING SPRINGS PERFORMANCE 0.75\"FRONT\/1\" REAR (2016+ CAMARO) SP041R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! BMR Suspension believes the right springs go beyond looks—your 2016-newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP041 for the street performance crowd who want to use their cars in a variety of application. These springs will lower your Sixth Gen Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP041 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A. ***NOTE: This product was not engineered for a V-6 or 4-Cylinder Camaros, nor has it been tested on them.***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Designed to fit 2016-Newer V8 Chevrolet Camaro (ZL1\/1LE compatible)\u003cbr\u003e- Drops your Camaro approximately .75” in the front, 1” in the rear\u003cbr\u003e- Linear spring rates\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Designed in the U.S.A.\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2016 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995938975912,"sku":"BMRSP041R","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/886f08fa6e4e2b67a18b1a535eaeeb8f.jpg?v=1604919377"},{"product_id":"bmr-10-15-5th-gen-camaro-v6-lowering-spring-kit-set-of-4-red","title":"BMR SET 1.2\" LOWERING SPRINGS - RED (10-15 CAMARO V6) SP052R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP052 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your V-6-equipped 2010 and newer Camaro 1.2-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP052 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your V-6-equipped 2010 and newer Camaro 1.2-inches\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 200 lb\/in front, 430 lb\/in rear spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Fits V-6 Models Only\u003cbr\u003e- Not recommended for convertibles\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2010 - 2015\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP052.pdf\" target=\"_blank\"\u003eSP052 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995939631272,"sku":"BMRSP052R","price":329.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/a2d94621034d6d7ad8466ec9f6d40963.jpg?v=1604919380"},{"product_id":"bmr-67-69-1st-gen-f-body-small-block-front-lowering-springs-red","title":"BMR 2\" FRONT LOWERING SPRINGS - RED (67-69 F-BODY\/68-74 X-BODY) SP055R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! After more than 45 years, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP055 for the street performance and pro-touring crowd who want to use their cars in a variety of application. These springs will drop the front end of your Small-Block-equipped Camaro 2-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The 620 lb\/in linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP055 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A. *Note - Ride height will vary depends on engine and accessory configuration. The front end drop relates directly to the amount of weight on the springs. A Small-Block with iron Cylinder heads and A\/C will sit lower than a Small-Block with aluminum cylinder heads and no A\/C.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the front of your Camaro 2-inches\u003cbr\u003e- Designed for Small-Block applications\u003cbr\u003e- 620-lb\/in spring rate\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1967 - 1969\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eF-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003cspan class=\"nobr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995940384936,"sku":"BMRSP055R","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/87ac7a08861c52e9ca3ca5354aed885a.jpg?v=1604919383"},{"product_id":"bmr-05-14-s197-mustang-gt-handling-version-lowering-springs-set-of-4-red","title":"BMR LOWERING SPRINGS HANDLING 1.5\" DROP (05-14 MUSTANG GT) SP065R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S197 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP065 for the handling crowd who regularly use their cars on the road course or for autocross. These springs will drop your S197 Mustang 1.5-inches and feature a fine-tuned spring rate to give you great handling and a smooth ride. The 240 lb\/inch front linear spring rates offer plenty of support, keeping the body flat and level in the corners. The 200 lb\/inch rear dual-rate spring decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR Suspension! BMR rear springs retain the factory \"hourglass\" shape designed by Ford engineers. This important feature provides a \"variable natural frequency\" in the spring to help counteract damaging wheelhop. This is a feature of the OE springs often overlooked by other companies simply because they don't realize it's benefits in multi-purpose applications. BMR Suspension’s SP065 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your S197 Mustang 1.5-inches\u003cbr\u003e- Dramatically improves handling\u003cbr\u003e- Lower center of gravity\u003cbr\u003e- Decreased body roll\u003cbr\u003e- Improved driver control\u003cbr\u003e- 240 lb\/inch front linear spring rate\u003cbr\u003e- 200 lb\/inch rear dual-rate spring\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2005 - 2014\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP065.pdf\" target=\"_blank\"\u003eSP065 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995942187176,"sku":"BMRSP065R","price":269.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/67_1cf4c82a-86ee-4b47-a3d8-dcb2377be020.jpg?v=1687208515"},{"product_id":"bmr-05-14-s197-mustang-gt-drag-version-lowering-springs-set-of-4-red","title":"BMR LOWERING SPRINGS DRAG 1.5\" DROP (05-14 MUSTANG GT) SP068R","description":"\u003cdiv\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S197 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP068 for the Mustang owners who spend a lot of time at the drag strip. These springs will drop your S197 Mustang approximately 1.5-inches and feature fine-tuned spring rates to give you improved launches. The front springs are linear with a 150lb\/inch rate. The rear spring is dual-rate with a working rate of 160 lb\/inch. The SP068 are soft enough for great front-end travel at the drag strip. When performance and looks are a must, rely on BMR Suspension! BMR rear springs retain the factory \"hourglass\" shape designed by Ford engineers. This important feature provides a \"variable natural frequency\" in the spring to help counteract damaging wheelhop. This is a feature of the OE springs often overlooked by other companies simply because they don't realize it's benefits in multi-purpose applications. BMR Suspension’s SP068 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your S197 Mustang 1.5-inches\u003cbr\u003e- Dramatically improves handling\u003cbr\u003e- Lower center of gravity\u003cbr\u003e- Decreased body roll\u003cbr\u003e- Improved driver control\u003cbr\u003e- 150lb\/inch front linear spring rate\u003cbr\u003e- 160lb\/inch rear linear working rate, dual-rate spring\u003cbr\u003e- Designed for drag race applications\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2005 - 2014\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP068.pdf\" target=\"_blank\"\u003eSP068 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995943137448,"sku":"BMRSP068R","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/67475f7d5df6a735876f0c70c8097b7e.jpg?v=1604919394"},{"product_id":"bmr-07-14-shelby-gt500-performance-version-lowering-springs-set-of-4-red","title":"BMR 07-14 SHELBY GT500 PERFORMANCE VERSION LOWERING SPRINGS (SET OF 4) - RED SP070","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S197 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP070 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your Shelby GT500 approximately 1.5 inch and feature a fine-tuned spring rate to give you great handling and a smooth ride. The 220 lb\/inch front linear spring rate and 200 lb\/inch rear dual-rate spring offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. The lowered stance and increased spring rate decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR Suspension! BMR rear springs retain the factory \"hourglass\" shape designed by Ford engineers. This important feature provides a \"variable natural frequency\" in the spring to help counteract damaging wheelhop. This is a feature of the OE springs often overlooked by other companies simply because they don't realize it's benefits in multi-purpose applications. BMR Suspension’s SP070 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your GT500 approximately 1.5-inch\u003cbr\u003e- 220 lb\/inch front linear spring rates\u003cbr\u003e- 200 lb\/inch rear dual-rate rear spring\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Lower center of gravity\u003cbr\u003e- Decreased body roll\u003cbr\u003e- Improved driver control\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2007 - 2014\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eShelby GT500\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eAvailable Colors\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eInstallation Instructions\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP070.pdf\" target=\"_blank\"\u003eSP070 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995943956648,"sku":"BMRSP070R","price":269.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/ab3616dd2b665035a9c28ce5aebee308.jpg?v=1604919397"},{"product_id":"bmr-07-14-shelby-gt500-drag-lowering-springs-set-of-4-red","title":"BMR 07-14 SHELBY GT500 DRAG LOWERING SPRINGS (SET OF 4) - RED SP075","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GT500 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP075 for the hardcore drag race crowd who regularly use their cars on the drag strip. These springs will drop your GT500 approximately 1.5 inch and feature a fine-tuned spring rate to give you better launches. The 165 lb\/inch front linear rate spring and 160 lb\/inch rear dual-rate spring offer plenty of weight transfer for hard launches. When performance and looks are a must, rely on BMR Suspension! BMR rear springs retain the factory \"hourglass\" shape designed by Ford engineers. This important feature provides a \"variable natural frequency\" in the spring to help counteract damaging wheelhop. This is a feature of the OE springs often overlooked by other companies simply because they don't realize it's benefits in multi-purpose applications. BMR Suspension’s SP075 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A. ***2007-2010 GT500 with Iron Block will have a lower ride height in the front***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your GT500 approximately 1.5 inch\u003cbr\u003e- 165 lb\/inch front linear rate spring\u003cbr\u003e- 160 lb\/inch rear dual-rate spring\u003cbr\u003e- Designed for drag race applications\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2007 - 2014\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eShelby GT500\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eAvailable Colors\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eInstallation Instructions\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP075.pdf\" target=\"_blank\"\u003eSP075 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995944644776,"sku":"BMRSP075R","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/83e13008441c1de26e321e5801f081a6.jpg?v=1604919401"},{"product_id":"bmr-10-15-5th-gen-camaro-v8-lowering-spring-kit-set-of-4-red-2","title":"BMR 10-15 5TH GEN CAMARO V8 LOWERING SPRING KIT (SET OF 4) - RED ( 2010-2015 ) SP077R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2010 - 2015 Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP077 for the street performance crowd who want to use their cars in a variety of applications. These springs will drop your V-8-equipped 2010 - 2015 Camaro 1.25-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The 220 lb\/in (front) and 460 lb\/in (rear) linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. The lowered stance and increased spring rate decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP077 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your V-8-equipped 2010 - 2015 Camaro 1.25-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 220 lb\/in front, 460 lb\/in rear spring rate\u003cbr\u003e- Lower center of gravity\u003cbr\u003e- Increased driver control\u003cbr\u003e- decreases body roll\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Fits V8 Models Only\u003cbr\u003e- Not recommended for convertibles\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2010 - 2015\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003cspan class=\"nobr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP077.pdf\" target=\"_blank\"\u003eSP077 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995945693352,"sku":"BMRSP077R","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/5de436927be76eb78eb09a36fcbc6133.jpg?v=1604919404"},{"product_id":"bmr-15-17-s550-mustang-performance-version-lowering-springs-set-of-4-red","title":"BMR LOWERING SPRINGS PERFORMANCE 1.25\" FRONT 0.25\" REAR - RED (2015+ MUSTANG GT) SP080R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP080 for the street performance crowd who want to use their cars in a variety of application. These springs will lower your S550, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP080 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A. NOTES: -This product also works for V-6 and Eco Boost Models. -Designed to work with OE mounts and perches or Camber Plates that re-use the OE perch. Aftermarket perches (Vorshlag) may not fit properly and could lead to excessive NVH.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your S550 Mustang for an aggressive look\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 170lb\/in Spring Rate - Front\u003cbr\u003e- 740lb\/in Spring Rate - Rear\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP080.pdf\" target=\"_blank\"\u003eSP080 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995946348712,"sku":"BMRSP080R","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/1fb2b191ca6ce7e968e6c58669dd40f5.jpg?v=1604919408"},{"product_id":"bmr-15-17-s550-mustang-handling-version-lowering-springs-set-of-4-red","title":"BMR LOWERING SPRINGS HANDLING .875\" FRONT 0.75\" REAR (2015+ MUSTANG GT) SP083R","description":"\u003cdiv class=\"product_desc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP083 for the handling crowd who want to use their cars for road course and autocross. These springs will lower your S550, and feature a fine-tuned spring rate to give you the ultimate in handling. The linear working spring rate (246 lb\/in front, 980 lb\/in rear) offers plenty of support, keeping the body flat and level in the corners. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP083 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A. NOTES: -This product was not engineered for a V-6 or 4-Cylinder EB Mustang, but has proven to work well with upgraded shocks and struts. -BMR strongly recommends aftermarket shocks and struts with the use of our S550 Handling Springs. -Designed to work with OE mounts and perches or Camber Plates that re-use the OE perch. Aftermarket perches (Vorshlag) may not fit properly and could lead to excessive NVH.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your S550 Mustang\u003cbr\u003e- Greatly improves handling\u003cbr\u003e- 250 lb\/in linear rate (Front)\u003cbr\u003e- 980 lb\/in linear rate (Rear)\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP083.pdf\" target=\"_blank\"\u003eSP083 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995947135144,"sku":"BMRSP083R","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/73421a37fc97569ed00e5cbc71bad98c.jpg?v=1604919411"},{"product_id":"bmr-15-17-s550-mustang-drag-version-lowering-springs-set-of-4-red","title":"BMR LOWERING SPRINGS DRAG 1.25\" FRONT 0.25\" REAR - RED (2015+ MUSTANG ) SP086R","description":"\u003cdiv class=\"product_desc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP086 for the drag race crowd who want to the ultimate in straight-line acceleration. These springs will lower your S550, and feature a fine-tuned spring rate (150 lb\/in front, 800 lb\/in rear) to give you great handling and a smooth ride. The linear spring rate offers plenty of support, while remaining soft enough for great weight transfer. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP086 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A. NOTES: -This product also works for V-6 and Eco Boost Models. -Designed to work with OE mounts and perches or Camber Plates that re-use the OE perch. Aftermarket perches (Vorshlag) may not fit properly and could lead to excessive NVH. -For V8 boosted applications, use SP089 Front and SP088 springs due to the increase in weight over the front suspension\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your S550 Mustang for an aggressive look\u003cbr\u003e- Designed for street\/drag race application\u003cbr\u003e- Offers great weight transfer and improved ride quality\u003cbr\u003e- 150 lb\/in linear rate (Front)\u003cbr\u003e- 800 lb\/in linear rate (Rear)\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP086.pdf\" target=\"_blank\"\u003eSP086 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product_desc\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995948609704,"sku":"BMRSP086R","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/bb240299040d28c6e90c65378b649c08.jpg?v=1604919415"},{"product_id":"bmr-15-17-s550-mustang-rear-drag-version-lowering-springs-red","title":"BMR REAR DRAG LOWERING SPRINGS (2015+ MUSTANG GT) SP088R","description":"\u003cdiv class=\"product_desc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP088 for the drag race crowd who want to the ultimate in straight-line acceleration. These springs will lower your S550, and feature a fine-tuned spring rate (800 lb\/in rear) to give you great handling and a smooth ride. The linear spring rate offers plenty of support, while remaining soft enough for great weight transfer. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP088 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A. ***NOTE: This product also works for V-6 and Eco Boost Models.***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your S550 Mustang for an aggressive look\u003cbr\u003e- Designed for street\/drag race application\u003cbr\u003e- Offers great weight transfer and improved ride quality\u003cbr\u003e- 980lb\/in (Rear) linear spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP088.pdf\" target=\"_blank\"\u003eSP088 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995949789352,"sku":"BMRSP088R","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/61f19ce85ec39c8a99a0a2b21999f067.jpg?v=1604919419"},{"product_id":"bmr-15-17-s550-mustang-front-performance-version-lowering-springs-red","title":"BMR FRONT LOWERING SPRINGS PERFORMANCE 0.875\" DROP (2015+ MUSTANG GT) SP089R","description":"\u003cdiv class=\"product_desc\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP089 for the street performance crowd who want to use their cars in a variety of application. These springs will lower the front of your S550 (minimum drop), and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP089 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A. NOTES: -Designed to work with OE mounts and perches or Camber Plates that re-use the OE perch. Aftermarket perches (Vorshlag) may not fit properly and could lead to excessive NVH.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the front of your S550 Mustang for an aggressive look\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Provides a minimum drop\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP089.pdf\" target=\"_blank\"\u003eSP089 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995950903464,"sku":"BMRSP089R","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/76b5c5f0f8a1836b6b2b36008c2f72d0.jpg?v=1604919422"},{"product_id":"bmr-82-82-3rd-gen-f-body-lowering-spring-kit-set-of-4-red","title":"BMR 1.25\" DROP LOWERING SPRING KIT RED (82-92 F-BODY) SP096","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your F-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP096 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your GM F-body 1.25-inches. These springs feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension's SP096 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Fits 1982-1992 GM F-body\u003cbr\u003e- Lowers the car 1.25-inches\u003cbr\u003e- 620 lb\/in spring rate (front)\u003cbr\u003e- 160 lb\/in spring rate (rear)\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1982 - 1992\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eF-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eAvailable Colors\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995951460520,"sku":"BMRSP096R","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/b6e214de2a70218769ae4531f327a644.jpg?v=1604919426"},{"product_id":"bmr-08-18-dodge-challenger-rear-lowering-springs-1-25in-drop-performance-version-red","title":"BMR 08-18 DODGE CHALLENGER REAR LOWERING SPRINGS 1.25IN DROP PERFORMANCE VERSION - RED SP112","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 2008 and newer Challenger needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP112 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the back of your V8-equipped 2008 and newer Challenger 1.25-inches, and feature a 720 pound\/inch spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP112 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the rear of your V8-equipped 2008 and newer Challenger 1.25-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 720 lb\/in spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Fits V8 Models Only\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2008 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eDodge Challenger\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eAvailable Colors\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003eInstallation Instructions\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP112.pdf\" target=\"_blank\"\u003eSP112 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995953590440,"sku":"BMRSP112R","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/27_22105e41-0a7f-4125-b322-9fcfc87440dd.jpg?v=1700076992"},{"product_id":"bmr-15-17-s550-mustang-performance-version-lowering-springs-set-of-4-red-1","title":"BMR LOWERING SPRINGS MINIMAL DROP PERFORMANCE SET OF 4 (2015+ MUSTANG) SP763R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP763 for the power adder crowd who want to use their cars for a variety of performance applications without worrying about the front end sitting too low. These springs will lower your S550 7\/8-inch in the front and 1\/2-inch in the rear, and feature a fine-tuned spring rate to give you great all-around handling characteristics and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP763 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A. ***NOTE: This product was not engineered for a V-6 or 4-Cylinder EB Mustang, nor has it been tested on them.***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your S550 Mustang for an aggressive look\u003cbr\u003e- Designed for power adder applications\u003cbr\u003e- 170lb\/in Spring Rate - Front\u003cbr\u003e- 740lb\/in Spring Rate - Rear\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP763.pdf\" target=\"_blank\"\u003eSP763 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995954737320,"sku":"BMRSP763R","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/b667c156b98c51765a66949a0d74ba01.jpg?v=1604919434"},{"product_id":"bmr-15-18-s550-mustang-lowering-spring-kit-set-of-4-red","title":"BMR LOWERING SPRINGS HANDLING VERSION (15-19 GT350) SPH765R","description":"\u003cdiv class=\"product_desc\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SPH765.pdf\" target=\"_blank\"\u003eSPH765 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":36995955163304,"sku":"BMRSPH765R","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/75_5dd06b0c-9a74-48c3-a614-bf0f6a94197d.jpg?v=1628047906"},{"product_id":"bmr-79-04-fox-mustang-lowering-spring-kit-set-of-4-red","title":"BMR LOWERING SPRINGS 1\" SET OF 4 RED (79-04 MUSTANG) SP027R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 1979-2004 Mustang needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP027 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your 1979-2004 Ford Mustang 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP027 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. ***Will not work with 1999-2004 Ford Mustang Cobras with independent rear suspension***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your 1979-2004 Mustang 1-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 525 lb\/in front, 235 lb\/in rear spring rates\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1979 - 2004\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP027.pdf\" target=\"_blank\"\u003eSP027 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":37039099838632,"sku":"BMRSP027R","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/e1eb5575aac5b248857b3e1f906e9981.jpg?v=1605263192"},{"product_id":"bmr-67-72-a-body-lowering-spring-kit-set-of-4-red-1","title":"BMR 1\" LOWERING SPRING KIT - RED (67-72 A-BODY) SP030","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP030 for the street performance crowd who want to use their cars in a variety of application. These springs will drop your 1967-1972 GM A-body 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP030 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your 1967-1972 GM A-body 1-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1967 - 1972\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eA-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":37039099871400,"sku":"BMRSP030R","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/21ee6534b8a401a8213249ba8d7d1830.jpg?v=1605263196"},{"product_id":"bmr-16-17-6th-gen-camaro-v8-front-performance-version-lowering-springs-red","title":"BMR FRONT LOWERING SPRINGS PERFORMANCE 0.75\" DROP (2016+ CAMARO) SP042R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! BMR Suspension believes the right springs go beyond looks—your 2016-newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP042 for the street performance crowd who want to use their cars in a variety of application. These springs will lower the front of your Sixth Gen Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear working spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP042 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A. ***NOTE: This product was not engineered for a V-6 or 4-Cylinder Camaros, nor has it been tested on them.***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Designed to fit 2016-Newer V8 Chevrolet Camaro\u003cbr\u003e- Drops your Camaro ¾” in the front\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Designed in the U.S.A.\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2016 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":37406117462184,"sku":"BMRSP042R","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/85a1440426fb9892d4a65cc01b2e5fa0.jpg?v=1608053493"},{"product_id":"bmr-79-04-fox-mustang-front-lowering-springs-red","title":"BMR 79-04 Fox Mustang Front Lowering Springs - Red SP028R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your 1979-2004 Mustang needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP028 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your 1979-2004 Ford Mustang 1-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP028 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers the front of your 1979-2004 Mustang 1-inch\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- 525 lb\/in spring rate\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1979 - 2004\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP028.pdf\" target=\"_blank\"\u003eSP028 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40717637943464,"sku":"BMRSP028R","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/8da27bb95cf7a1333d473d03184518f9.jpg?v=1628696148"},{"product_id":"bmr-16-17-6th-gen-camaro-v8-rear-performance-version-lowering-springs-red","title":"BMR 16-17 6th Gen Camaro V8 Rear Performance Version Lowering Springs - Red SP043R","description":"\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is nothing like the aggressive look of a car with the right stance! BMR Suspension believes the right springs go beyond looks—your 2016-newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP043 for the street performance crowd who want to use their cars in a variety of application. These springs will lower the rear of your Sixth Gen Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP043 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A. ***NOTE: This product was not engineered for a V-6 or 4-Cylinder Camaros, nor has it been tested on them.***\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- Designed to fit 2016-Newer V8 Chevrolet Camaro\u003cbr data-mce-fragment=\"1\"\u003e- Drops your Camaro 1” in the rear\u003cbr data-mce-fragment=\"1\"\u003e- Linear spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Improves handling and ride quality\u003cbr data-mce-fragment=\"1\"\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr data-mce-fragment=\"1\"\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr data-mce-fragment=\"1\"\u003e- Lifetime warranty against spring sag\u003cbr data-mce-fragment=\"1\"\u003e- Stress-relieved at 750 degrees F\u003cbr data-mce-fragment=\"1\"\u003e- Shot-peened\u003cbr data-mce-fragment=\"1\"\u003e- Computer tested for accurate height and spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Designed in the U.S.A.\u003cbr data-mce-fragment=\"1\"\u003e- Made in the U.S.A.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e2016 - 2023\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003eChevy Camaro\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003eThis Part Fits:\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40717638074536,"sku":"BMRSP043R","price":149.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/300a65aa8147c56e3a10679d72e77ac5.jpg?v=1628696151"},{"product_id":"bmr-15-17-s550-mustang-front-performance-version-lowering-springs-red-1","title":"BMR 2015 - 2023 Mustang S550 Front Performance Version Lowering Springs - Red SP081R","description":"\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP081 for the street performance crowd who want to use their cars in a variety of application. These springs will lower the front of your S550, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP081 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A. NOTES: -This product also works for V-6 and Eco Boost Models. -Designed to work with OE mounts and perches or Camber Plates that re-use the OE perch. Aftermarket perches (Vorshlag) may not fit properly and could lead to excessive NVH.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- Lowers the front of your S550 Mustang for an aggressive look\u003cbr data-mce-fragment=\"1\"\u003e- Improves handling and ride quality\u003cbr data-mce-fragment=\"1\"\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr data-mce-fragment=\"1\"\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr data-mce-fragment=\"1\"\u003e- Lifetime warranty against spring sag\u003cbr data-mce-fragment=\"1\"\u003e- Stress-relieved at 750 degrees F\u003cbr data-mce-fragment=\"1\"\u003e- Shot-peened\u003cbr data-mce-fragment=\"1\"\u003e- Computer tested for accurate height and spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Made in the U.S.A.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e2015 - 2023\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003eRed Powercoat\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP081.pdf\" class=\"install_link\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP081.pdf\" target=\"_blank\"\u003eSP081 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003eThis Part Fits:\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBullitt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT 50 Years Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eV6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40717638303912,"sku":"BMRSP081R","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/65e92829eacc11bda1bfa407c2115c01.jpg?v=1628696153"},{"product_id":"bmr-15-17-s550-mustang-rear-handling-version-lowering-springs-red","title":"BMR 15-17 S550 Mustang Rear Handling Version Lowering Springs - Red SP085R","description":"\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP085 for the handling crowd who want to use their cars for road course and autocross. These springs will lower your S550, and feature a fine-tuned spring rate to give you the ultimate in handling. The linear spring rate (980 lb\/in rear) offers plenty of support, keeping the body flat and level in the corners. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP085 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A. NOTES: -This product also works for V-6 and Eco Boost Models.*** -BMR strongly recommends aftermarket shocks and struts with the use of our S550 Handling Springs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- Lowers the rear of your S550 Mustang for an aggressive look\u003cbr data-mce-fragment=\"1\"\u003e- Improves handling and ride quality\u003cbr data-mce-fragment=\"1\"\u003e- 980lb\/in linear spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr data-mce-fragment=\"1\"\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr data-mce-fragment=\"1\"\u003e- Lifetime warranty against spring sag\u003cbr data-mce-fragment=\"1\"\u003e- Stress-relieved at 750 degrees F\u003cbr data-mce-fragment=\"1\"\u003e- Shot-peened\u003cbr data-mce-fragment=\"1\"\u003e- Computer tested for accurate height and spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Made in the U.S.A.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e2015 - 2023\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003eRed Powercoat\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP085.pdf\" class=\"install_link\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP085.pdf\" target=\"_blank\"\u003eSP085 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003eThis Part Fits:\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBullitt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT 50 Years Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eV6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40717638369448,"sku":"BMRSP085R","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/8ff08f94b3b0e2564f289be7265f67c5.jpg?v=1628696155"},{"product_id":"bmr-15-17-s550-mustang-front-drag-version-lowering-springs-red","title":"BMR 15-17 S550 Mustang Front Drag Version Lowering Springs - Red SP087","description":"\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S550 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP087 for the drag race crowd who want to the ultimate in straight-line acceleration. These springs will lower your S550, and feature a fine-tuned spring rate (150 lb\/in front) to give you great handling and a smooth ride. The linear spring rate offers plenty of support, while remaining soft enough for great weight transfer. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP087 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A. NOTES: -This product also works for V-6 and Eco Boost Models. -Designed to work with OE mounts and perches or Camber Plates that re-use the OE perch. Aftermarket perches (Vorshlag) may not fit properly and could lead to excessive NVH.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- Lowers the front of your S550 Mustang for an aggressive look\u003cbr data-mce-fragment=\"1\"\u003e- Designed for street\/drag race application\u003cbr data-mce-fragment=\"1\"\u003e- Offers great weight transfer and improved ride quality\u003cbr data-mce-fragment=\"1\"\u003e- 150 lb\/in linear spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr data-mce-fragment=\"1\"\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr data-mce-fragment=\"1\"\u003e- Lifetime warranty against spring sag\u003cbr data-mce-fragment=\"1\"\u003e- Stress-relieved at 750 degrees F\u003cbr data-mce-fragment=\"1\"\u003e- Shot-peened\u003cbr data-mce-fragment=\"1\"\u003e- Computer tested for accurate height and spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Made in the U.S.A.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e2015 - 2023\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003eRed Powercoat\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP087.pdf\" class=\"install_link\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP087.pdf\" target=\"_blank\"\u003eSP087 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003eThis Part Fits:\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBullitt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT 50 Years Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eV6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40717638893736,"sku":"BMRSP087R","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/14a70a0f88225654d968e3a87c2464aa.jpg?v=1628696158"},{"product_id":"bmr-08-19-dodge-challenger-lowering-springs-1-25in-drop-set-of-4-red","title":"BMR 08-19 Dodge Challenger Lowering Springs 1.25in Drop - Set of 4 - Red SP110","description":"\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your Challenger needs to perform, too! BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP110 for the street performance crowd who want to use their cars in a variety of applications. These springs will lower your V8-equipped 2008 and newer Challenger by 1.25 inches in the front and rear. The 280 lb\/in (front) and 720 lb\/in (rear) linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. The lowered stance and increased spring rate decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR Suspension! SP110 Lowering Springs will lower Hellcat, Demon, and Redeye Challengers by approximately 1.5 inches in the front and 1.25 inches in the rear. BMR Suspension’s SP110 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- Lowers your V8-equipped 2008 and newer Challenger by 1.25-inches\u003cbr data-mce-fragment=\"1\"\u003e- Dramatically improves handling and ride quality\u003cbr data-mce-fragment=\"1\"\u003e- Lower center of gravity\u003cbr data-mce-fragment=\"1\"\u003e- Decreased body roll\u003cbr data-mce-fragment=\"1\"\u003e- Improved driver control\u003cbr data-mce-fragment=\"1\"\u003e- 280lb front, 720lb rear spring rates\u003cbr data-mce-fragment=\"1\"\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr data-mce-fragment=\"1\"\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr data-mce-fragment=\"1\"\u003e- Lifetime warranty against spring sag\u003cbr data-mce-fragment=\"1\"\u003e- Stress-relieved at 750 degrees F\u003cbr data-mce-fragment=\"1\"\u003e- Shot-peened\u003cbr data-mce-fragment=\"1\"\u003e- Computer tested for accurate height and spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Made in the U.S.A.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e2008 - 2023\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003eDodge Challenger\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003eRed Powercoat\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003eInstallation Instructions\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\u003ca href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP110.pdf\" class=\"install_link\" data-mce-fragment=\"1\" data-mce-href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SP110.pdf\" target=\"_blank\"\u003eSP110 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003eThis Part Fits:\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003e392 Hemi Scat Pack Shaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2020\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eR\/T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2018\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eR\/T 392\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eR\/T Classic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2016\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eR\/T Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eR\/T Plus Shaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016,2019-2020\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eR\/T Scat Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eR\/T Shaker\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eRallye Redline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eScat Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2018\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eSRT 392\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eSRT Hellcat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2014\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eSRT8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eSXT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2018\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eT\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2018\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eChallenger\u003c\/td\u003e\n\u003ctd\u003eT\/A 392\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40717639057576,"sku":"BMRSP110R","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/a2603b44a9f6371c6116d5c730bbd2ec.jpg?v=1628696160"},{"product_id":"bmr-15-20-ford-mustang-s550-lowering-spring-kit-set-of-4-red","title":"BMR 2015 - 2023 Mustang S550 Lowering Spring Kit (Set Of 4) - Red SPD763R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003cspan class=\"nobr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\u003ca class=\"install_link\" href=\"http:\/\/www.bmrsuspension.com\/siteart\/install\/SPD763.pdf\" target=\"_blank\"\u003eSPD763 Installation Instructions\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":42783448694952,"sku":"BMRSPD763R","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/b286f2a67b2ab7e5e3b4a7df2d277c79.jpg?v=1664583182"},{"product_id":"bmr-18-20-s550-mustang-gt-magneride-15-20-gt350-lowering-spring-set-of-rear-only-red","title":"BMR 2015 - 2023 Mustang GT MagneRide\/15-20 GT350 Lowering Spring Set of Rear only - Red SPH767R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e2015 - 2023\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":42783448760488,"sku":"BMRSPH767R","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/d1773011c412363b50db95ce17cbda6e.jpg?v=1664583184"},{"product_id":"bmr-05-14-s197-mustang-gt-front-performance-version-lowering-springs-red","title":"BMR 05-14 S197 Mustang GT Front Performance Version Lowering Springs - Red","description":"\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSuspension's scratch and dent products usually have minor to moderate aesthetic defects. Due to the cost of stripping and recoating, BMR has chosen to leave the parts as-is and sell them parts at a discounted price. There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your S197 needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP011 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your S197 Mustang 1.5-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP011 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e- Lowers the front of your S197 Mustang 1.5-inches\u003cbr data-mce-fragment=\"1\"\u003e- Improves handling and ride quality\u003cbr data-mce-fragment=\"1\"\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr data-mce-fragment=\"1\"\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr data-mce-fragment=\"1\"\u003e- Lifetime warranty against spring sag\u003cbr data-mce-fragment=\"1\"\u003e- Stress-relieved at 750 degrees F\u003cbr data-mce-fragment=\"1\"\u003e- Shot-peened\u003cbr data-mce-fragment=\"1\"\u003e- Computer tested for accurate height and spring rate\u003cbr data-mce-fragment=\"1\"\u003e- Made in the U.S.A.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003e2005 - 2014\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan class=\"nobr\" data-mce-fragment=\"1\"\u003eMustang\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel panel-default\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"panel-heading\" id=\"product_header\" data-mce-fragment=\"1\"\u003eAvailable Colors\u003c\/div\u003e\n\u003cdiv class=\"panel-body\" data-mce-fragment=\"1\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003eThis Part Fits:\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2013\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBoss 302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBullitt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2008\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eShelby GT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2014\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eShelby GT500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eShelby GT500KR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":43501290094760,"sku":"BMRSP011R","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/d96f9652561850d2ebe7fc57625017c2.jpg?v=1681384324"},{"product_id":"bmr-93-02-f-body-handling-version-lowering-spring-kit-set-of-4-red","title":"BMR 93-02 F-Body Handling Version Lowering Spring Kit (Set Of 4) - Red SP090R","description":"\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your F-Body needs to perform, too! BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP090 for the handling crowd who regularly use their cars on the road course or for autocross. These springs will drop your Fourth Gen F-Body 1.25-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The 725 lb\/in front and 210 lb\/in rear spring rates offer plenty of support, keeping the body flat and level in the corners. The lowered stance and increased spring rate decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP090 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e\n\u003cp\u003e- Lowers your Fourth Gen F-body 1.25-inches\u003cbr\u003e- Dramatically improves handling\u003cbr\u003e- Lower center of gravity\u003cbr\u003e- Decreased body roll\u003cbr\u003e- Improved driver control\u003cbr\u003e- 725lb front, 210lb rear spring rates\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Made in the U.S.A.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003e1993 - 2002\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"nobr\"\u003eF-Body\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"panel panel-default\"\u003e\n\u003cdiv id=\"product_header\" class=\"panel-heading\"\u003e\u003cstrong\u003eAvailable Colors\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"panel-body\"\u003eRed Powercoat\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":43501290127528,"sku":"BMRSP090R","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/cecb325304800cb9eef1e6e170e280e5.jpg?v=1681384327"},{"product_id":"bmr-78-87-g-body-lowering-springs-front-2in-drop","title":"BMR 78-87 G-Body Lowering Springs - Front 2in Drop","description":"There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 1978-1987 G-Body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982-1983\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eEstate Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eGNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eGrand National\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eLimited Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1982\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983-1986\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eT-Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1983\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Estate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Landau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eEstate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eLandau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003ePolice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979,1981-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eCL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eLandau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1986-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978,1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1981\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBrougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1981\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1979\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eVista Cruiser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eVista Cruiser Brougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eBrougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1983\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eLJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1980\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eSJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":46115114614952,"sku":"BMRSP464R","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/333e8a28530ec3cf43b4b0e9cd8f4877_97780115-7b05-4691-9f82-684115a68ac7.jpg?v=1703196586"},{"product_id":"bmr-93-02-f-body-front-lowering-springs-red","title":"BMR 93-02 F-Body Front Lowering Springs - Red","description":"There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your F-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP002 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your GM F-body 1.25-inches, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! Front spring rates - 550 lbs\/in linear.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eIndianapolis 500 Pace Car\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-1997\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2002\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ28 SS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eFormula\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eTrans Am\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eTrans Am GT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":47088873439400,"sku":"BMRSP002R","price":179.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/b23f4686905d687da88a406ad15a2af8.jpg?v=1710106715"},{"product_id":"bmr-64-66-a-body-rear-lowering-springs-red","title":"BMR 64-66 A-Body Rear Lowering Springs - Red","description":"There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965-1966\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eGran Sport\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eSkylark\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003eDeluxe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eEl Camino\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003e442\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eHoliday\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGTO\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eLeMans\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":47088874029224,"sku":"BMRSP017R","price":149.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/0031778512cbaf3226c64163899a6754.jpg?v=1710106718"},{"product_id":"bmr-64-66-a-body-rear-lowering-springs-red-1","title":"BMR 64-66 A-Body Rear Lowering Springs - Red","description":"There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965-1966\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eGran Sport\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eSkylark\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1965-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003eDeluxe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eChevelle\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eEl Camino\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003e442\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eHoliday\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGTO\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1964-1966\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eLeMans\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":47088874586280,"sku":"BMRSP018R","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/43809b29ac9fac0a4462c3fc2d0e3178.jpg?v=1710106722"},{"product_id":"bmr-10-15-5th-gen-camaro-v8-front-lowering-springs-red","title":"BMR 10-15 5th Gen Camaro V8 Front Lowering Springs - Red","description":"There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ\/28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":47088874651816,"sku":"BMRSP020R","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/781e590e9ed1b0e51b5703ec76fab8e1.jpg?v=1710106725"},{"product_id":"bmr-10-15-5th-gen-camaro-v8-rear-lowering-springs-red","title":"BMR 10-15 5th Gen Camaro V8 Rear Lowering Springs - Red","description":"There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your 2010 and newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ\/28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZL1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":47088875208872,"sku":"BMRSP021R","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/dbb3507d3e5e20eeee2a46f7201e38eb.jpg?v=1710106729"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/collections\/bmr-lowering-springs-mustang-camaro-muscle-cars_88b4b05c-8584-4a11-896d-b8a235f5b345.jpg?v=1779666200","url":"https:\/\/eliteracefab.com\/collections\/bmr-lowering-springs.oembed","provider":"eliteracefab.com","version":"1.0","type":"link"}