{"title":"Complete Lighting Kits","description":"\u003cp\u003eComplete Lighting Kits: Headlights + Tail Lights combos for cheaper!\u003c\/p\u003e","products":[{"product_id":"morimoto-08-10-ford-super-duty-hybrid-heads-and-red-tails-headtailkit1","title":"Morimoto 08-10 Ford Super Duty Hybrid Heads and Red Tails","description":"Headlights: Facelift by Morimoto: Just because you're driving an older truck doesn't mean you don't deserve to see and be seen. The Hybrid LED Headlights from Morimoto for the 08-10 Ford Super Duty are a front-end game changer for your truck. New look, more light, and reasonably priced... what is not to like? Updated Design: The design of the Morimoto XB Hybrids for the 08-10 Super Duty trucks is reminiscent of the more modern OEM LED headlights and there's no question-- It is quite fitting as a facelift on these trucks. The LED daytime running light is powered by Osram 5000K LEDs and is probably bright enough to illuminate the road more effectively than your stock halogen Ford Super Duty headlights. Hybrid Turn Signals: With the XB Hybrids, you'll re-use your stock halogen turn signal bulb right there in the center of the light-- which on one hand is nice in order to avoid any hyperflash shenanigans. Of course, if you're all about having an LED turn signal, no problem... you could put a set of plug n play LED bulbs in the middle too, which we also offer. Performance and Precision: Morimoto continues to build headlights that aren't all about looks and nothing more. We've seen the full spectrum, trust us, most aftermarket headlights end up being a downgrade in the light output department-- but that's far from the case here. The XB hybrids use a dedicated low and high beam LED projector that produces a supremely wide, bright, and properly distributed beam pattern. Throw. Your. Old. Headlights. Away. Now. Not only that, but these optics meet \u0026amp; exceed all SAE, DOT standards, and come out of the box fully aimed to OEM spec (yes, they are adjustable too). Plug and Play Wiring: As for wiring, Morimoto's LED headlights are designed to work on your SuperDuty without any modifications. Very simple plug n play setup with just a few connections that you should be able to setup in no time. Nobody likes to cut and splice wiring, and Morimoto respects that. Special: What does an older Super Duty and a new U-haul truck have in common? Well, the stock, garbage headlights of course! If you have this truck, you're probably struggling to see much of anything at night... that's no mystery, that's reality. Give yourself and your truck the well-deserved gift of vision, safety and style. Get yourself a set of the Morimoto XB Hybrid LED headlights for the 08-18 Ford Super Duty. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB Hybrid LED Headlights: Ford Super Duty (08-10 \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford Super Duty (99-16 \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord Super Duty: 2008-2010\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984402538664,"sku":"HEADTAILKIT1","price":1647.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152648.010.jpg?v=1759353316"},{"product_id":"morimoto-09-14-f-150-amber-drl-heads-and-smoked-tails-headtailkit10","title":"Morimoto 09-14 F-150 Amber DRL Heads and Smoked Tails","description":"Headlights: No Substitutes: If you're still running oldschool halogen headlights on your F150 or Raptor, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best LED headlights on the market today for the F150 aftermarket. OEM Plus: We live, eat, and sleep headlights. While the F150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their triple-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The LED headlights are designed to work on your Ford F150 without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram Amber LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. While that feature will cause others to mistake your truck for an Audi; for those who are a bit more traditional they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the Bi-LED kuria-optic projectors are as modern as it gets. Tail Lights: Ford F-150: While every biz in the aftermarket has a catalog full of products for the 09-14 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!  Style: Inspired by the design of the more modern OEM LED tail lights from later generation trucks, these look right at-home on the rear end of the 12th Gen. Two clusters of four 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-14 F-150s!  Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Ford F-150 (09-14 \/ Amber DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford F-150 (09-14 \/ Smoked Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord F-150: 2009-2014 incl. OEM HID Trucks\u003c\/li\u003e\n\u003cli\u003eNOTE: Canadian trucks may require disabling OE DRL\u003c\/li\u003e\n\u003cli\u003eTrucks with EcoBoost Engine: Small interference with vacuum pump underneath light. Needs minor adjustment to clear\u003c\/li\u003e\n\u003cli\u003eReplaces Ford Part #: FO2503289, FO2502289, FO2503287, FO2502287, DL3Z13008A, DL3Z13008B, DL3Z13008EB, DL3Z13008EC, FR560B1A12SD6V, DL3Z13008DB, DL3Z13008FB, DL3Z13008BB, DL3Z13008CB\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984402964648,"sku":"HEADTAILKIT10","price":1944.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152649.010.jpg?v=1759353344"},{"product_id":"morimoto-21-23-ford-f-150-white-drl-heads-and-red-tails-headtailkit100","title":"21-23 Ford F-150 White DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 21-23 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984403161256,"sku":"HEADTAILKIT100","price":2165.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152650.010_39662add-c447-4770-b7a9-ef872c537c3e.jpg?v=1760017779"},{"product_id":"morimoto-21-23-ford-f-150-amber-drl-heads-and-red-tails-headtailkit101","title":"21-23 Ford F-150 Amber DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 21-23 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984403947688,"sku":"HEADTAILKIT101","price":2335.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152651.010_65e25e43-3220-4313-bcc3-32a32158f031.jpg?v=1760017784"},{"product_id":"morimoto-21-23-ford-f-150-white-drl-heads-and-smoked-tails-headtailkit102","title":"21-23 Ford F-150 White DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 2021-2023 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984404275368,"sku":"HEADTAILKIT102","price":2080.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152652.010_8b026289-b964-448e-a20e-11ae13764597.jpg?v=1760017792"},{"product_id":"morimoto-21-23-ford-f-150-amber-drl-heads-and-smoked-tails-headtailkit103","title":"21-23 Ford F-150 Amber DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 2021-2023 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984404963496,"sku":"HEADTAILKIT103","price":2250.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152653.010_8abc549e-a233-41db-b11f-c4c63be264ef.jpg?v=1760017797"},{"product_id":"morimoto-21-23-ford-f-150-white-drl-heads-and-red-tails-oem-led-reflector-headtailkit104","title":"21-23 Ford F-150 White DRL Heads and Red Tails OEM LED Reflector","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 21-23 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984405029032,"sku":"HEADTAILKIT104","price":2346.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152654.010_460a299e-1218-4110-8dfa-57da4e4bbf03.jpg?v=1760017803"},{"product_id":"morimoto-21-23-ford-f-150-amber-drl-heads-and-red-tails-oem-led-reflector-headtailkit105","title":"21-23 Ford F-150 Amber DRL Heads and Red Tails OEM LED Reflector","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 21-23 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984405127336,"sku":"HEADTAILKIT105","price":2516.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152655.010_dbb26b8d-7e47-4275-8b53-435e89328613.jpg?v=1760017810"},{"product_id":"morimoto-21-23-ford-f-150-white-drl-heads-and-smoked-tails-oem-led-reflector-headtailkit106","title":"21-23 Ford F-150 White DRL Heads and Smoked Tails OEM LED Reflector","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 2021-2023 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984405717160,"sku":"HEADTAILKIT106","price":2261.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152656.010_eaada93b-69fa-4fca-bfa3-8892833ce09e.jpg?v=1760017818"},{"product_id":"morimoto-21-23-ford-f-150-amber-drl-heads-and-smoked-tails-oem-led-reflector-headtailkit107","title":"21-23 Ford F-150 Amber DRL Heads and Smoked Tails OEM LED Reflector","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package. Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the new F150 LED headlights from Morimoto look. With a single large rectangular projector front and center that's surrounded by a Ford GT-esque shroud that elegantly flows into the lines of the grille, they look right at home. On the top and bottom, we've incorporated LED reflector optics that assist the Bi-LED projector while enhancing the OEM+ appearance.  Daytime Running Lights: The daytime running light does eliminate the controversial L-shaped DRL on the 21+ F150 in favor of a more traditional C-shaped outline. This is ideal for owners who either have the standard halogen fog lights (without the integrated DRL) or who are replacing the stock fog lights with aftermarket units. The DRL optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative. Unmatched Visibility: These use single Bi-LED projector with a unique over-sized optic that produces an impressive amount of light output. In addition, LED reflector-based optics above and below the projector assist in boosting overall beam coverage and intensity throughout. These things completely blow away the OEM halogen headlights, and even out-perform the OEM LED headlights in many ways too.  DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford F150 are still fully compliant. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well. Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Note that if your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the complicated Linbus system. They will not work on trucks with the OE dual-projector based headlights. Tail Lights: New Ford F-150: While every biz in the aftermarket scrambles to turn out products for the latest and greatest F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every new F-150 owner has been waiting for, and they work with every version of the truck from the base model, up to the Raptor! Ultimate Flex: Compatible with all versions of the 2021-2023 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, or the OE LED with BLIS, or the Raptor style tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights. Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the new F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of modern OEM LED tail lights from Ford and the 3D sidemarkers on the 3rd Gen Raptor, these look right at-home on the rear end of the new F-150. Two clusters of 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 21-23 F-150 trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984405815464,"sku":"HEADTAILKIT107","price":2431.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152657.010_c6dfe62d-5c77-4850-8f2e-b7f145d84313.jpg?v=1760017825"},{"product_id":"morimoto-14-24-4runner-evo-heads-and-red-tails-headtailkit108","title":"14-24 4Runner Evo Heads and Red Tails","description":"\u003cp\u003eHeadlights: Evolutionary: A simple design refresh would have been easy, but that's not what this is all about. The all-new XB Evo headlights are a showcase of everything Morimoto is made of. From concept to completion. Packed with features that demonstrate a true attention to detail including the latest in technology, compliance, quality, and styling, these headlights are designed for enthusiasts who are serious about all the above, even if it comes at a premium.  Maximum Performance: Thanks to an all-new generation of Morimoto Bi-LED projectors, the XB Evo headlights will meet and exceed the highest standards for headlight performance that are set by the Insurance Institute for Highway Safety... which is a tough mark even for most modern luxury automakers. Here, the 4Runner Evo headlight utilizes dual Bi-LED projectors to deliver unmatched light output, with an incredibly bright and wide low beam, and a high beam that destroys darkness. In high beam mode, dedicated D-Optics add even more intensity and coverage. All optics are powered by the latest OE-grade automotive LEDs from Nichia in Japan.  On Road: The Morimoto XB Evo Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The vertical aim is fully adjustable within +\/- 6 degrees for a perfect alignment on any 4Runner, even with a lift. The system was designed in California by Morimoto's lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does. Off Road: Yes, you read that correctly. Out of the box, the XB Evos are only producing a fraction of their potential intensity for compliance reasons. Want more light for your off-road adventures? The optional Supercharged LED driver boosts both low and high beam intensity by 30-50%, all without sacrificing reliability or warranty. While the Supercharged drivers easily enable the XB Evo to outshine every other headlight for the 4Runner on the market, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads.  Frost-Free System: Our patent-pending heating system warms the surface temperature of the headlight lens to minimize frost buildup when driving through wet and snowy conditions in the wintertime. When the temperature drops below 5 degrees Celsius, the system is enabled to operate on your command by flashing the high beams four times. The lights will confirm that the heating function is operating by flashing the high beams twice. From there, it will automatically maintain temps within the headlight housing to mitigate frost buildup on the lens. A cold-climate game changer, this feature ensures the output of your XB Evo headlights will remain strong when you need it most.  DRL Optics: The turn signals and daytime running lights illuminate glass-like TIR-optics with special surface textures, which enables maximum intensity from all viewing angles. Easily out-shining low-tech DRL optics found in most every other aftermarket headlight, they also provide a one-off look with the bespoke topographic pattern etched into the sidewall.  Easy to Personalize: The signal swap system allows users to personalize how the daytime running lights and turn signals operate according to personal preference, all through a simple plug n play key on the back of each headlight. The daytime running light can be configured to run full-time in either white or amber with no compromise in intensity either way. The turn signals can operate sequentially from side to side, or in a more traditional on-off mode with an elegant fade-off effect.  Start-up Sequence: When starting your 4Runner, the optics will automatically illuminate in a multi-stage sequence before turning back off. Unlike every other feature baked into the XB Evo headlights, this does absolutely nothing to improve performance. But executed properly, it does look cool, and there's nothing wrong with that!  OE Fit and Installation: The XB Evo headlights are expertly crafted to match all OE specifications to ensure perfect fitment and hassle-free install. They will bolt onto the original mounting points and line up to the surrounding sheet-metal without any massaging, and then plug into the factory wire harness and then work without errors on the dash, nor flickering, flashing, or radio interference. Thoughtfully engineered for a modification-free install. No factory warranties void. No headaches. Well-Built: These headlights are completely designed, engineered, and tested in the USA by the Morimoto team to meet the high expectations of our customers. Nichia LEDs from Japan are used throughout. All wiring and connections are OE-grade. When it comes to UV protection, OE Toyota headlights are industry-best, which is why we've formulated a new hard coating that exceeds their 3,000-hour standard for resistance against cracking, fading, and yellowing lenses from UV exposure. The list goes on, but as the saying goes: you get what you pay for. XB Evo headlights aren't cheap, but they are built to an OEM+ standard and should easily last the life of your 4Runner! We're proud to stand behind the product with an industry-leading five-year warranty. Tail Lights: Toyota 4Runner LED Tail Lights: The 5th Gen 4Runner is one of the best trucks Toyota has ever built, beloved by many, and if you have already upped the ante with beadlocks and bigger tires, a low-profile roof rack, and all the amber LED pods money can buy, then it's probably time to ditch the stock tail lights too. The Morimoto XB LED tail lights are the category killer that every 4Runner owner has been waiting for! Style: With three rows of 3D light blades that complement the edgy geometry on the 5th gen 4Runner, these look right at home on the truck. Their TIR-based optics serve as the brake light and turn signal, and they're extremely bright--easily visible both day and night. Pair that with the amber reverse-sequential turn signal, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the T4R! Reverse Lights: Are often overlooked, but not with the Morimoto XB tail lights for the 4Runner. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going--no matter the direction! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984406405288,"sku":"HEADTAILKIT108","price":2038.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152658.010_973b8531-ac79-409a-ac3e-45eb7432d254.jpg?v=1760017832"},{"product_id":"morimoto-14-24-4runner-evo-hybrid-heads-and-red-tails-headtailkit109","title":"14-24 4Runner Evo Hybrid Heads and Red Tails","description":"\u003cp\u003eHeadlights: Evolutionary: A simple design refresh would have been easy, but that's not what this is all about. The all-new XB Evo Hybrid headlights are a showcase of everything Morimoto is made of at a price that everybody can afford. Packed with features that demonstrate a true attention to detail including the latest in technology, compliance, quality, and styling, these headlights are designed for enthusiasts who are serious about all the above, even if it comes at a premium.  Maximum Performance: Thanks to an all-new generation of Morimoto Bi-LED projectors, the XB Evo Hybrid headlights will meet and exceed the highest standards for headlight performance that are set by the Insurance Institute for Highway Safety... which is a tough mark even for most modern luxury automakers. Here, the 4Runner XB Evo Hybrid headlight utilizes the same Bi-LED projectors found in the higher end XB Evo model to deliver unmatched light output, with an incredibly bright and wide low beam, and a high beam that destroys darkness. All optics are powered by the latest OE-grade automotive LEDs from Nichia in Japan. On Road: The Morimoto XB Evo Hybrid Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The vertical aim is fully adjustable within +\/- 6 degrees for a perfect alignment on any 4Runner, even with a lift. The system was designed in California by Morimoto's lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does.  Off Road: Yes, you read that correctly. Out of the box, XB Evo and Evo Hybrid are only producing a fraction of their potential intensity for compliance reasons. Want more light for your off-road adventures? The optional Supercharged LED drivers boost both low and high beam intensity by 30-50%, all without sacrificing reliability or warranty. It also adds the welcome-sequence to the DRL and projectors that doesn't normally appear on the Hybrid version of the headlight. While the Supercharged drivers easily enable the XB Evo to outshine every other headlight for the 4Runner on the market, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads.  DRL Optics: The turn signals and daytime running lights illuminate glass-like TIR-optics with special surface textures, which enables maximum intensity from all viewing angles. Easily out-shining low-tech DRL optics found in most every other aftermarket headlight, they also provide a one-off look with the bespoke topographic pattern etched into the sidewall.  DRL and Turn Signals: The daytime running light illuminates in a crisp clear white color that perfectly matches the LED projectors. Thanks to their impressive optics, the amber turn signals are also incredibly bright and operate in a solid flashing pattern with an elegant fade-off effect. Sequential turn signals and Amber DRL settings are not available for the Hybrid version of the XB Evo headlights.  OE Fit and Installation: The XB Evo Hybrid headlights are expertly crafted to match all OE specifications to ensure perfect fitment and hassle-free install. They will bolt onto the original mounting points and line up to the surrounding sheet-metal without any massaging, and then plug into the factory wire harness and then work without errors on the dash, nor flickering, flashing, or radio interference. Thoughtfully engineered for a modification-free install. No factory warranties void. No headaches.  Well-Built: These headlights are completely designed, engineered and tested in the USA by the Morimoto team to meet the high expectations of our customers. Nichia LEDs from Japan are used throughout. All wiring and connections are OE-grade. When it comes to UV protection, OE Toyota headlights are industry-best, which is why we've formulated a new hard coating that exceeds their 3,000-hour standard for resistance against cracking, fading, and yellowing lenses from UV exposure. The list goes on but as the saying goes: you get what you pay for. XB Evo Hybrid headlights aren't cheap, but they are built to an OEM+ standard and should easily last the life of your 4Runner! We're proud to stand behind the product with an industry-leading five-year warranty. Tail Lights: Toyota 4Runner LED Tail Lights: The 5th Gen 4Runner is one of the best trucks Toyota has ever built, beloved by many, and if you have already upped the ante with beadlocks and bigger tires, a low-profile roof rack, and all the amber LED pods money can buy, then it's probably time to ditch the stock tail lights too. The Morimoto XB LED tail lights are the category killer that every 4Runner owner has been waiting for! Style: With three rows of 3D light blades that complement the edgy geometry on the 5th gen 4Runner, these look right at home on the truck. Their TIR-based optics serve as the brake light and turn signal, and they're extremely bright--easily visible both day and night. Pair that with the amber reverse-sequential turn signal, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the T4R! Reverse Lights: Are often overlooked, but not with the Morimoto XB tail lights for the 4Runner. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going--no matter the direction! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984406470824,"sku":"HEADTAILKIT109","price":1740.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152659.010.jpg?v=1760017838"},{"product_id":"morimoto-16-18-dodge-ram-white-drl-heads-and-red-tails-headtailkit11","title":"Morimoto 16-18 Dodge Ram White DRL Heads and Red Tails","description":"Headlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket OEM Plus: We live, eat, and sleep headlights. While the Dodge Ram LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. NOTE: 2015 Model Year trucks require the optional resistors. This is only for 2015 year trucks, not 2015 or newer! Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Mopar Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Dodge Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Dodge Ram (09-18 \/ White DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Dodge Ram (09-18 \/ Gen II \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 1500\/HD: 2016-2018\u003c\/li\u003e\n\u003cli\u003eResistors:  Required for 2015 Trucks\u003c\/li\u003e\n\u003cli\u003eReplaces Mopar Part #: 55277409AD, 55277409AE, 55277409AF, 55277410AD, 55277410AE, 55277410AF, 68001485AG, 68001484AG, 68096439AC\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984407060648,"sku":"HEADTAILKIT11","price":2089.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152660.010.jpg?v=1759353418"},{"product_id":"morimoto-14-24-4runner-evo-heads-and-smoked-tails-headtailkit110","title":"14-24 4Runner Evo Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Evolutionary: A simple design refresh would have been easy, but that's not what this is all about. The all-new XB Evo headlights are a showcase of everything Morimoto is made of. From concept to completion. Packed with features that demonstrate a true attention to detail including the latest in technology, compliance, quality, and styling, these headlights are designed for enthusiasts who are serious about all the above, even if it comes at a premium.  Maximum Performance: Thanks to an all-new generation of Morimoto Bi-LED projectors, the XB Evo headlights will meet and exceed the highest standards for headlight performance that are set by the Insurance Institute for Highway Safety... which is a tough mark even for most modern luxury automakers. Here, the 4Runner Evo headlight utilizes dual Bi-LED projectors to deliver unmatched light output, with an incredibly bright and wide low beam, and a high beam that destroys darkness. In high beam mode, dedicated D-Optics add even more intensity and coverage. All optics are powered by the latest OE-grade automotive LEDs from Nichia in Japan.  On Road: The Morimoto XB Evo Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The vertical aim is fully adjustable within +\/- 6 degrees for a perfect alignment on any 4Runner, even with a lift. The system was designed in California by Morimoto's lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does. Off Road: Yes, you read that correctly. Out of the box, the XB Evos are only producing a fraction of their potential intensity for compliance reasons. Want more light for your off-road adventures? The optional Supercharged LED driver boosts both low and high beam intensity by 30-50%, all without sacrificing reliability or warranty. While the Supercharged drivers easily enable the XB Evo to outshine every other headlight for the 4Runner on the market, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads.  Frost-Free System: Our patent-pending heating system warms the surface temperature of the headlight lens to minimize frost buildup when driving through wet and snowy conditions in the wintertime. When the temperature drops below 5 degrees Celsius, the system is enabled to operate on your command by flashing the high beams four times. The lights will confirm that the heating function is operating by flashing the high beams twice. From there, it will automatically maintain temps within the headlight housing to mitigate frost buildup on the lens. A cold-climate game changer, this feature ensures the output of your XB Evo headlights will remain strong when you need it most.  DRL Optics: The turn signals and daytime running lights illuminate glass-like TIR-optics with special surface textures, which enables maximum intensity from all viewing angles. Easily out-shining low-tech DRL optics found in most every other aftermarket headlight, they also provide a one-off look with the bespoke topographic pattern etched into the sidewall.  Easy to Personalize: The signal swap system allows users to personalize how the daytime running lights and turn signals operate according to personal preference, all through a simple plug n play key on the back of each headlight. The daytime running light can be configured to run full-time in either white or amber with no compromise in intensity either way. The turn signals can operate sequentially from side to side, or in a more traditional on-off mode with an elegant fade-off effect.  Start-up Sequence: When starting your 4Runner, the optics will automatically illuminate in a multi-stage sequence before turning back off. Unlike every other feature baked into the XB Evo headlights, this does absolutely nothing to improve performance. But executed properly, it does look cool, and there's nothing wrong with that!  OE Fit and Installation: The XB Evo headlights are expertly crafted to match all OE specifications to ensure perfect fitment and hassle-free install. They will bolt onto the original mounting points and line up to the surrounding sheet-metal without any massaging, and then plug into the factory wire harness and then work without errors on the dash, nor flickering, flashing, or radio interference. Thoughtfully engineered for a modification-free install. No factory warranties void. No headaches. Well-Built: These headlights are completely designed, engineered, and tested in the USA by the Morimoto team to meet the high expectations of our customers. Nichia LEDs from Japan are used throughout. All wiring and connections are OE-grade. When it comes to UV protection, OE Toyota headlights are industry-best, which is why we've formulated a new hard coating that exceeds their 3,000-hour standard for resistance against cracking, fading, and yellowing lenses from UV exposure. The list goes on, but as the saying goes: you get what you pay for. XB Evo headlights aren't cheap, but they are built to an OEM+ standard and should easily last the life of your 4Runner! We're proud to stand behind the product with an industry-leading five-year warranty. Tail Lights: Toyota 4Runner LED Tail Lights: The 5th Gen 4Runner is one of the best trucks Toyota has ever built, beloved by many, and if you have already upped the ante with beadlocks and bigger tires, a low-profile roof rack, and all the amber LED pods money can buy, then its probably time to ditch the stock tail lights too. The Morimoto XB LED tail lights are the category killer that every 4Runner owner has been waiting for! Style: With three rows of 3D light blades that complement the edgy geometry on the 5th gen 4Runner, these look right at home on the truck. Their TIR-based optics serve as the brake light and turn signal, and they're extremely bright--easily visible both day and night. Pair that with the amber reverse-sequential turn signal, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the T4R! Reverse Lights: Are often overlooked, but not with the Morimoto XB tail lights for the 4Runner. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going--no matter the direction! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984407224488,"sku":"HEADTAILKIT110","price":2046.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152661.010_c3f70d9e-d7cd-49a6-a81f-0ebd460721fd.jpg?v=1760017851"},{"product_id":"morimoto-14-24-4runner-evo-hybrid-heads-and-smoked-tails-headtailkit111","title":"14-24 4Runner Evo Hybrid Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Evolutionary: A simple design refresh would have been easy, but that's not what this is all about. The all-new XB Evo Hybrid headlights are a showcase of everything Morimoto is made of at a price that everybody can afford. Packed with features that demonstrate a true attention to detail including the latest in technology, compliance, quality, and styling, these headlights are designed for enthusiasts who are serious about all the above, even if it comes at a premium.  Maximum Performance: Thanks to an all-new generation of Morimoto Bi-LED projectors, the XB Evo Hybrid headlights will meet and exceed the highest standards for headlight performance that are set by the Insurance Institute for Highway Safety... which is a tough mark even for most modern luxury automakers. Here, the 4Runner XB Evo Hybrid headlight utilizes the same Bi-LED projectors found in the higher end XB Evo model to deliver unmatched light output, with an incredibly bright and wide low beam, and a high beam that destroys darkness. All optics are powered by the latest OE-grade automotive LEDs from Nichia in Japan. On Road: The Morimoto XB Evo Hybrid Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The vertical aim is fully adjustable within +\/- 6 degrees for a perfect alignment on any 4Runner, even with a lift. The system was designed in California by Morimoto's lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does.  Off Road: Yes, you read that correctly. Out of the box, XB Evo and Evo Hybrid are only producing a fraction of their potential intensity for compliance reasons. Want more light for your off-road adventures? The optional Supercharged LED drivers boost both low and high beam intensity by 30-50%, all without sacrificing reliability or warranty. It also adds the welcome-sequence to the DRL and projectors that doesn't normally appear on the Hybrid version of the headlight. While the Supercharged drivers easily enable the XB Evo to outshine every other headlight for the 4Runner on the market, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads.  DRL Optics: The turn signals and daytime running lights illuminate glass-like TIR-optics with special surface textures, which enables maximum intensity from all viewing angles. Easily out-shining low-tech DRL optics found in most every other aftermarket headlight, they also provide a one-off look with the bespoke topographic pattern etched into the sidewall.  DRL and Turn Signals: The daytime running light illuminates in a crisp clear white color that perfectly matches the LED projectors. Thanks to their impressive optics, the amber turn signals are also incredibly bright and operate in a solid flashing pattern with an elegant fade-off effect. Sequential turn signals and Amber DRL settings are not available for the Hybrid version of the XB Evo headlights.  OE Fit and Installation: The XB Evo Hybrid headlights are expertly crafted to match all OE specifications to ensure perfect fitment and hassle-free install. They will bolt onto the original mounting points and line up to the surrounding sheet-metal without any massaging, and then plug into the factory wire harness and then work without errors on the dash, nor flickering, flashing, or radio interference. Thoughtfully engineered for a modification-free install. No factory warranties void. No headaches.  Well-Built: These headlights are completely designed, engineered and tested in the USA by the Morimoto team to meet the high expectations of our customers. Nichia LEDs from Japan are used throughout. All wiring and connections are OE-grade. When it comes to UV protection, OE Toyota headlights are industry-best, which is why we've formulated a new hard coating that exceeds their 3,000-hour standard for resistance against cracking, fading, and yellowing lenses from UV exposure. The list goes on but as the saying goes: you get what you pay for. XB Evo Hybrid headlights aren't cheap, but they are built to an OEM+ standard and should easily last the life of your 4Runner! We're proud to stand behind the product with an industry-leading five-year warranty. Tail Lights: Toyota 4Runner LED Tail Lights: The 5th Gen 4Runner is one of the best trucks Toyota has ever built, beloved by many, and if you have already upped the ante with beadlocks and bigger tires, a low-profile roof rack, and all the amber LED pods money can buy, then its probably time to ditch the stock tail lights too. The Morimoto XB LED tail lights are the category killer that every 4Runner owner has been waiting for! Style: With three rows of 3D light blades that complement the edgy geometry on the 5th gen 4Runner, these look right at home on the truck. Their TIR-based optics serve as the brake light and turn signal, and they're extremely bright--easily visible both day and night. Pair that with the amber reverse-sequential turn signal, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the T4R! Reverse Lights: Are often overlooked, but not with the Morimoto XB tail lights for the 4Runner. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going--no matter the direction! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984407814312,"sku":"HEADTAILKIT111","price":1749.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152662.010.jpg?v=1760017858"},{"product_id":"morimoto-16-18-dodge-ram-amber-drl-heads-and-red-tails-headtailkit12","title":"Morimoto 16-18 Dodge Ram Amber DRL Heads and Red Tails","description":"Headlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket. OEM Plus: While the Dodge Ram LED Headlights from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. It is important to note that for 2015 Model Year Rams, you will need the optional resistors to avoid canbus issues. This is required on 2015 year trucks only, not 2015 or newer. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram Amber LEDs and is insanely bright, easily visible during the day. The dedicated Amber DRL model is reminiscent of the OEM Projector headlights, but kicked up ten notches. In addition, there is a separate optic that's dedicated to the turn signal function that produces the full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Mopar Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (Amber), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Dodge Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Dodge Ram (09-18 \/ Amber DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Dodge Ram (09-18 \/ Gen II \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 1500\/HD: 2016-2018\u003c\/li\u003e\n\u003cli\u003eResistors: Required for 2015 Trucks\u003c\/li\u003e\n\u003cli\u003eReplaces Mopar Part #: 55277409AD, 55277409AE, 55277409AF, 55277410AD, 55277410AE, 55277410AF, 68001485AG, 68001484AG, 68096439AC\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984408469672,"sku":"HEADTAILKIT12","price":2089.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152671.010.jpg?v=1759353432"},{"product_id":"morimoto-17-20-raptor-white-drl-heads-and-red-tails-headtailkit124","title":"17-20 Raptor White DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford F150, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best F150 LED headlights on the market today. Second Gen Update: The 15-17 F150 XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original F150 XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the F150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2015-2017 F150 headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. DOT Approved: Make no mistake, these Ford XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB F150 LED headlights are designed to work without any modifications. These 2015-2017 F150 headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. No error codes, no flickering, hyper-flashing, or radio interference. These Ford LED headlights can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of amber LED's provides the turn signal function. You can set up these Ford XB LED headlights to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your 2015-2017 F150 headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, you'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's F150 LED headlights, that job is painless! Since they're sealed with Butyl Rubber, these Ford XB LED headlights are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984408535208,"sku":"HEADTAILKIT124","price":2260.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152676.010_58431faa-a0e4-47b5-a2df-709cc74c9edf.jpg?v=1760017873"},{"product_id":"morimoto-17-20-raptor-amber-drl-heads-and-red-tails-headtailkit125","title":"17-20 Raptor Amber DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford Raptor, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Raptor LED headlights on the market today. Second Gen Update: The 16+ Raptor XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original Raptor XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the Raptor LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. OEM+ Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. PLEASE NOTE: On the Amber\/Raptor edition, the LED DRL is extremely bright and DOES NOT DIM (just like the OE LED headlights) Plug-n-Play: Wiring is easy too! The XB Raptor LED headlights are designed to work without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of LED's provides the turn signal function. You can set them up to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Raptor headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, You'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's Raptor LED headlights, that job is painless! Since they're sealed with Butyl Rubber, they are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984409125032,"sku":"HEADTAILKIT125","price":2175.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152677.010_20a13c98-6c34-4091-8018-87c9f8cfa680.jpg?v=1760017881"},{"product_id":"morimoto-17-20-raptor-white-drl-heads-and-smoked-tails-headtailkit127","title":"17-20 Raptor White DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford F150, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best F150 LED headlights on the market today. Second Gen Update: The 15-17 F150 XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original F150 XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the F150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2015-2017 F150 headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. DOT Approved: Make no mistake, these Ford XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB F150 LED headlights are designed to work without any modifications. These 2015-2017 F150 headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. No error codes, no flickering, hyper-flashing, or radio interference. These Ford LED headlights can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of amber LED's provides the turn signal function. You can set up these Ford XB LED headlights to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your 2015-2017 F150 headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, you'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's F150 LED headlights, that job is painless! Since they're sealed with Butyl Rubber, these Ford XB LED headlights are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984409190568,"sku":"HEADTAILKIT127","price":2234.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152679.010_18273d93-7047-4f11-b828-2969b44930d7.jpg?v=1760017891"},{"product_id":"morimoto-17-20-raptor-amber-drl-heads-and-smoked-tails-headtailkit128","title":"17-20 Raptor Amber DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford Raptor, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Raptor LED headlights on the market today. Second Gen Update: The 16+ Raptor XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original Raptor XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the Raptor LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. OEM+ Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. PLEASE NOTE: On the Amber\/Raptor edition, the LED DRL is extremely bright and DOES NOT DIM (just like the OE LED headlights) Plug-n-Play: Wiring is easy too! The XB Raptor LED headlights are designed to work without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of LED's provides the turn signal function. You can set them up to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Raptor headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, You'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's Raptor LED headlights, that job is painless! Since they're sealed with Butyl Rubber, they are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984409288872,"sku":"HEADTAILKIT128","price":2149.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152680.010.jpg?v=1760017897"},{"product_id":"morimoto-16-18-dodge-ram-white-drl-heads-and-smoked-tails-headtailkit13","title":"16-18 Dodge Ram White DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket OEM Plus: We live, eat, and sleep headlights. While the Dodge Ram LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. NOTE: 2015 Model Year trucks require the optional resistors. This is only for 2015 year trucks, not 2015 or newer! Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984409878696,"sku":"HEADTAILKIT13","price":2055.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152682.010_ec81055d-757e-40fd-8226-4681702130a2.jpg?v=1760017904"},{"product_id":"morimoto-16-18-dodge-ram-amber-drl-heads-and-smoked-tails-headtailkit14","title":"16-18 Dodge Ram Amber DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket. OEM Plus: While the Dodge Ram LED Headlights from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. It is important to note that for 2015 Model Year Rams, you will need the optional resistors to avoid canbus issues. This is required on 2015 year trucks only, not 2015 or newer. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram Amber LEDs and is insanely bright, easily visible during the day. The dedicated Amber DRL model is reminiscent of the OEM Projector headlights, but kicked up ten notches. In addition, there is a separate optic that's dedicated to the turn signal function that produces the full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984409977000,"sku":"HEADTAILKIT14","price":2055.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152693.010_c478ac95-84e8-4190-8d5d-06a2ca0dac03.jpg?v=1760017911"},{"product_id":"morimoto-09-14-dodge-ram-white-drl-heads-and-red-tails-headtailkit15","title":"Morimoto 09-14 Dodge Ram White DRL Heads and Red Tails","description":"Headlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket OEM Plus: We live, eat, and sleep headlights. While the Dodge Ram LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. NOTE: 2015 Model Year trucks require the optional resistors. This is only for 2015 year trucks, not 2015 or newer! Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Mopar Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Dodge Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Dodge Ram (09-18 \/ White DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Dodge Ram (09-18 \/ Gen II \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 1500\/HD: 2009-2014\u003c\/li\u003e\n\u003cli\u003eReplaces Mopar Part #: 55277409AD, 55277409AE, 55277409AF, 55277410AD, 55277410AE, 55277410AF, 68001485AG, 68001484AG, 68096439AC\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984410534056,"sku":"HEADTAILKIT15","price":2109.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152704.010.jpg?v=1759353465"},{"product_id":"morimoto-09-14-dodge-ram-amber-drl-heads-and-red-tails-headtailkit16","title":"Morimoto 09-14 Dodge Ram Amber DRL Heads and Red Tails","description":"Headlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket. OEM Plus: While the Dodge Ram LED Headlights from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. It is important to note that for 2015 Model Year Rams, you will need the optional resistors to avoid canbus issues. This is required on 2015 year trucks only, not 2015 or newer. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram Amber LEDs and is insanely bright, easily visible during the day. The dedicated Amber DRL model is reminiscent of the OEM Projector headlights, but kicked up ten notches. In addition, there is a separate optic that's dedicated to the turn signal function that produces the full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Mopar Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (Amber), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Dodge Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Dodge Ram (09-18 \/ Amber DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Dodge Ram (09-18 \/ Gen II \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 1500\/HD: 2009-2014\u003c\/li\u003e\n\u003cli\u003eReplaces Mopar Part #: 55277409AD, 55277409AE, 55277409AF, 55277410AD, 55277410AE, 55277410AF, 68001485AG, 68001484AG, 68096439AC\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984410632360,"sku":"HEADTAILKIT16","price":2109.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152705.010.jpg?v=1759353467"},{"product_id":"morimoto-09-14-dodge-ram-white-drl-heads-and-smoked-tails-headtailkit17","title":"Morimoto 09-14 Dodge Ram White DRL Heads and Smoked Tails","description":"Headlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket OEM Plus: We live, eat, and sleep headlights. While the Dodge Ram LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. NOTE: 2015 Model Year trucks require the optional resistors. This is only for 2015 year trucks, not 2015 or newer! Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Mopar Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Dodge Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Dodge Ram (09-18 \/ White DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Dodge Ram (09-18 \/ Gen II \/ Smoked Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 1500\/HD: 2009-2014\u003c\/li\u003e\n\u003cli\u003eReplaces Mopar Part #: 55277409AD, 55277409AE, 55277409AF, 55277410AD, 55277410AE, 55277410AF, 68001485AG, 68001484AG, 68096439AC\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984410665128,"sku":"HEADTAILKIT17","price":2075.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152706.010.jpg?v=1759353471"},{"product_id":"morimoto-09-14-dodge-ram-amber-drl-heads-and-smoked-tails-headtailkit18","title":"Morimoto 09-14 Dodge Ram Amber DRL Heads and Smoked Tails","description":"Headlights: No Substitutes: If your Ram is still rocking OEM headlights, then it's time for an upgrade. Even the latest and greatest OE \"projector\" headlights for the Ram are still powered by halogen bulbs and their light output is laughable at best. Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform every alternative. Easily the best LED headlights on the market today for the Ram aftermarket. OEM Plus: While the Dodge Ram LED Headlights from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame considering how bad Mopar's OEM Projector headlights are in the first place. The double Bi-LED setup in the new Ram LED headlights produces a well-defined beam pattern with a great amount of width, intensity, and a proper distribution of light. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! Morimoto's Ram LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. It is important to note that for 2015 Model Year Rams, you will need the optional resistors to avoid canbus issues. This is required on 2015 year trucks only, not 2015 or newer. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram Amber LEDs and is insanely bright, easily visible during the day. The dedicated Amber DRL model is reminiscent of the OEM Projector headlights, but kicked up ten notches. In addition, there is a separate optic that's dedicated to the turn signal function that produces the full sequential turn signal. For those who are a bit more traditional, they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! Their design was inspired by the top of the line headlights on the 2019+ Ram. The subtle elements inside are more than enough to make them stand out, but they're clean enough to be considered original-equipment to those who don't know any better. The piano black trim and smoked gray sidemarkers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ram Classic: While every biz in the aftermarket has a catalog full of products for the 09-18 Dodge Ram, somehow no brand has yet to deliver a worthy set of tail lights for this truck. When it comes to style, performance, features, quality, and compatibility, the Morimoto XB LED tail lights are the category killer that every Ram owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for your Ram. While they come standard with powerful LED reverse lights, just wait, theres more! Morimotos BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too! Style: Inspired by the design of the most modern OEM LED tail lights from the current generation Ram trucks, these look right at-home on the rear end of the fourth gen. Two clusters of parallel 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup too, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-18 Ram trucks! Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.   Full Compatibility: The Gen II XB Tail Lights have been fully revamped over the original version, and are now compatible with Ram trucks that came stock with the standard halogen\/incandescent tail lights, as well as trucks with the OEM LED tail lights. They are 100% plug n play on both versions, and all wiring is included in the box.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Mopar Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (Amber), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Dodge Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Dodge Ram (09-18 \/ Amber DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Dodge Ram (09-18 \/ Gen II \/ Smoked Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDodge Ram 1500\/HD: 2009-2014\u003c\/li\u003e\n\u003cli\u003eReplaces Mopar Part #: 55277409AD, 55277409AE, 55277409AF, 55277410AD, 55277410AE, 55277410AF, 68001485AG, 68001484AG, 68096439AC\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984411287720,"sku":"HEADTAILKIT18","price":2075.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152707.010.jpg?v=1759353476"},{"product_id":"morimoto-11-16-ford-super-duty-white-drl-heads-and-red-tails-headtailkit19","title":"Morimoto 11-16 Ford Super Duty White DRL Heads and Red Tails","description":"Headlights: No Substitutes: If you don't have LED powered headlights on your Ford Super Duty, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Super Duty LED headlights on the market today. OEM Plus: We live, eat, and sleep headlights. While the XB LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2011-16 Super Duty headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. In our testing, the F150 version even out-performed the expensive OEM LED headlights....and the Super Duty model will out perform even those with a low beam that will be 2x as bright, and their bi-LED high beams. DOT Approved: Make no mistake, these XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB Super Duty LED headlights are designed to work without any modifications. These 2011-16 Super Duty headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A parallel row of amber LED's encompasses the entire surface area of the white DRL, and when activated - runs in sequence towards the outer vertical edge of the housings. While that feature is bound to look amazing, for those who are a bit more traditional - they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Super Duty headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete 2011-16 Super Duty headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Ford Super Duty (11-16 \/ White DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford Super Duty (99-16 \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord Super Duty: 2011-2016*\u003c\/li\u003e\n\u003cli\u003eReplaces Ford Part #: FO2503290, FO2502290, BC3Z13008E, BC3Z13008F\u003c\/li\u003e\n\u003cli\u003e*NOTE: Unknown circumstances related to the BCM can cause the passengers side turn signal to lock-up. \u003ca onclick=\"_gaq.push(['_trackEvent', 'Outbound Links', 'morimotohid.com'])\" href=\"https:\/\/www.morimotohid.com\/product_guides\/11-16%20Siuperduty%20turn%20signal%20fix%20web.pdf\" target=\"_blank\"\u003eClick here for information on the recommended fix\u003c\/a\u003e. Note: this fix requires a OHP ELMconfig OBD2 scanner to be purchased\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984411320488,"sku":"HEADTAILKIT19","price":1987.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152708.010.jpg?v=1759353483"},{"product_id":"morimoto-08-10-ford-super-duty-hybrid-heads-and-smoked-tails-headtailkit2","title":"Morimoto 08-10 Ford Super Duty Hybrid Heads and Smoked Tails","description":"Headlights: Facelift by Morimoto: Just because you're driving an older truck doesn't mean you don't deserve to see and be seen. The Hybrid LED Headlights from Morimoto for the 08-10 Ford Super Duty are a front-end game changer for your truck. New look, more light, and reasonably priced... what is not to like? Updated Design: The design of the Morimoto XB Hybrids for the 08-10 Super Duty trucks is reminiscent of the more modern OEM LED headlights and there's no question-- It is quite fitting as a facelift on these trucks. The LED daytime running light is powered by Osram 5000K LEDs and is probably bright enough to illuminate the road more effectively than your stock halogen Ford Super Duty headlights. Hybrid Turn Signals: With the XB Hybrids, you'll re-use your stock halogen turn signal bulb right there in the center of the light-- which on one hand is nice in order to avoid any hyperflash shenanigans. Of course, if you're all about having an LED turn signal, no problem... you could put a set of plug n play LED bulbs in the middle too, which we also offer. Performance and Precision: Morimoto continues to build headlights that aren't all about looks and nothing more. We've seen the full spectrum, trust us, most aftermarket headlights end up being a downgrade in the light output department-- but that's far from the case here. The XB hybrids use a dedicated low and high beam LED projector that produces a supremely wide, bright, and properly distributed beam pattern. Throw. Your. Old. Headlights. Away. Now. Not only that, but these optics meet \u0026amp; exceed all SAE, DOT standards, and come out of the box fully aimed to OEM spec (yes, they are adjustable too). Plug and Play Wiring: As for wiring, Morimoto's LED headlights are designed to work on your SuperDuty without any modifications. Very simple plug n play setup with just a few connections that you should be able to setup in no time. Nobody likes to cut and splice wiring, and Morimoto respects that. Special: What does an older Super Duty and a new U-haul truck have in common? Well, the stock, garbage headlights of course! If you have this truck, you're probably struggling to see much of anything at night... that's no mystery, that's reality. Give yourself and your truck the well-deserved gift of vision, safety and style. Get yourself a set of the Morimoto XB Hybrid LED headlights for the 08-18 Ford Super Duty. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB Hybrid LED Headlights: Ford Super Duty (08-10 \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford Super Duty (99-16 \/ Smoked Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord Super Duty: 2008-2010\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984411975848,"sku":"HEADTAILKIT2","price":1613.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152709.010.jpg?v=1759353484"},{"product_id":"morimoto-11-16-ford-super-duty-amber-drl-heads-and-red-tails-headtailkit20","title":"Morimoto 11-16 Ford Super Duty Amber DRL Heads and Red Tails","description":"Headlights: No Substitutes: If you don't have LED powered headlights on your Ford Super Duty, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Super Duty LED headlights on the market today. OEM Plus: We live, eat, and sleep headlights. While the XB LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2011-16 Super Duty headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. In our testing, the F150 version even out-performed the expensive OEM LED headlights.... and the Super Duty model will out perform even those with a low beam that will be 2x as bright, and their bi-LED high beams. DOT Approved: Make no mistake, these XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB Super Duty LED headlights are designed to work without any modifications. These 2011-16 Super Duty headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram Amber LEDs and is insanely bright, easily visible during the day. A parallel row of LED's encompasses the entire surface area of the amber DRL, and when activated - runs in sequence towards the outer vertical edge of the housings. While that feature is bound to look amazing, for those who are a bit more traditional - they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Super Duty headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete 2011-16 Super Duty headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (Amber), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Ford Super Duty (11-16 \/ Amber DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford Super Duty (99-16 \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord Super Duty: 2011-2016*\u003c\/li\u003e\n\u003cli\u003eReplaces Ford Part #: FO2503290, FO2502290, BC3Z13008E, BC3Z13008F\u003c\/li\u003e\n\u003cli\u003e*NOTE: Unknown circumstances related to the BCM can cause the passengers side turn signal to lock-up. \u003ca onclick=\"_gaq.push(['_trackEvent', 'Outbound Links', 'morimotohid.com'])\" href=\"https:\/\/www.morimotohid.com\/product_guides\/11-16%20Siuperduty%20turn%20signal%20fix%20web.pdf\" target=\"_blank\"\u003eClick here for information on the recommended fix\u003c\/a\u003e. Note: this fix requires a OHP ELMconfig OBD2 scanner to be purchased\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984412074152,"sku":"HEADTAILKIT20","price":2072.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152710.010.jpg?v=1759353489"},{"product_id":"morimoto-11-16-ford-super-duty-hybrid-heads-and-red-tails-headtailkit21","title":"Morimoto 11-16 Ford Super Duty Hybrid Heads and Red Tails","description":"Headlights: Special: If you ask us, the 11-16 Super Duty reigns king as the most badass Heavy Duty truck on the road today. What's not to like? The thing is a beast. Well--aside from the basic headlights. If you've got big bucks burning a hole in your pocket, then the high-end XB headlights from Morimoto are a no brainer. If, however, your brain is telling you to save some dough while accomplishing the mission then go for XB Hybrid LEDs for your Ford Super Duty. Bang for the Buck: The XB Hybrids share many of the same core components developed for the top-of-the-line series from Morimoto, without some of the features that make them considerably more expensive. That said... the Super Duty Hybrid LED headlights are hardly a compromise. True reflector optics for the DRL. Killer light output. Good looks... all wrapped up inside of an OEM-grade housing and backed with a solid five-year warranty. Compared to the more expensive Morimoto XB LEDs, these use two integrated LED projectors (instead of three). High Performance: When it comes to light output, these Super Duty headlights surely will not disappoint. Not all Ford guys are all about bling -- light output is important too--and there is no lack of luminosity here. The Hybrids have a powerful, wide, and bright led low beam projector, and a dedicated led high beam projector too. Their optics were developed specifically for use the hybrid lineup to produce an amazing beam pattern despite the affordable price point. Unlike other \"headlight upgrades\" that look decent, these look great, and will most definitely make driving in the dark a pleasure. Bring on the night! DOT Compliant: For the ladies and gents that care about street legality, their dual led projector optics meet \u0026amp; exceed all SAE, DOT, and FVMSS108 regulations. They come out of the box aimed to factory specs and are also fully adjustable for those of you with lifted trucks. Plug N Play: When it comes to wiring, it doesn't get much easier than this. The XB Hybrid LED headlights are designed to work on your Super Duty without any modifications, regardless of which trim level you have. They will plug into the factory connectors for the stock headlights and will work seamlessly without any issues at all. You will however have to add one cable, which comes included, to power the DRL--but that's Plug N Play with one of the slots in your fuse box. No big deal. See the installation guide PDF for more information. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD \/ Right Hand Traffic Only\u003c\/li\u003e\n\u003cli\u003eInput: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eIntegrated LED Functions: DRL, Turn Signal, Parking, Low Beam, High Beam\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic LED\u003c\/li\u003e\n\u003cli\u003eWiring: Plug N Play for all sub-models within model year range\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB Hybrid LED Headlights: Ford Super Duty (11-16 \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford Super Duty (99-16 \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord Super Duty (F-250, F-350, F-450): 11-16 (all)\u003c\/li\u003e\n\u003cli\u003eCompliance: Meets all DOT, SAE and FMVSS108 Standards\u003c\/li\u003e\n\u003cli\u003eReplaces Ford Part #: FO2503290, FO2502290, BC3Z13008E, BC3Z13008F\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984412696744,"sku":"HEADTAILKIT21","price":1562.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152711.010.jpg?v=1759353493"},{"product_id":"morimoto-11-16-ford-super-duty-white-drl-heads-and-smoked-tails-headtailkit22","title":"Morimoto 11-16 Ford Super Duty White DRL Heads and Smoked Tails","description":"Headlights: No Substitutes: If you don't have LED powered headlights on your Ford Super Duty, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Super Duty LED headlights on the market today. OEM Plus: We live, eat, and sleep headlights. While the XB LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2011-16 Super Duty headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. In our testing, the F150 version even out-performed the expensive OEM LED headlights....and the Super Duty model will out perform even those with a low beam that will be 2x as bright, and their bi-LED high beams. DOT Approved: Make no mistake, these XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB Super Duty LED headlights are designed to work without any modifications. These 2011-16 Super Duty headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A parallel row of amber LED's encompasses the entire surface area of the white DRL, and when activated - runs in sequence towards the outer vertical edge of the housings. While that feature is bound to look amazing, for those who are a bit more traditional - they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Super Duty headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete 2011-16 Super Duty headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD Only\u003c\/li\u003e\n\u003cli\u003eInput: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eFunctions: DRL (White), Turn, Parking, Low, High\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eOptic: Kuria Optic Bi-LED\u003c\/li\u003e\n\u003cli\u003eUV Coating: Momentive UVHC3000\u003c\/li\u003e\n\u003cli\u003eTail Lights: Input: Ford Multi-Pin OEM\u003c\/li\u003e\n\u003cli\u003eMaterial: ABS Plastic (Housing), UV-Resistant Polycarbonate (Lens)\u003c\/li\u003e\n\u003cli\u003eLight Source: SSC LED\u003c\/li\u003e\n\u003cli\u003eBrake Light: Red\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB LED Headlights: Ford Super Duty (11-16 \/ White DRL \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford Super Duty (99-16 \/ Smoked Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord Super Duty: 2011-2016*\u003c\/li\u003e\n\u003cli\u003eReplaces Ford Part #: FO2503290, FO2502290, BC3Z13008E, BC3Z13008F\u003c\/li\u003e\n\u003cli\u003e*NOTE: Unknown circumstances related to the BCM can cause the passengers side turn signal to lock-up. \u003ca onclick=\"_gaq.push(['_trackEvent', 'Outbound Links', 'morimotohid.com'])\" href=\"https:\/\/www.morimotohid.com\/product_guides\/11-16%20Siuperduty%20turn%20signal%20fix%20web.pdf\" target=\"_blank\"\u003eClick here for information on the recommended fix\u003c\/a\u003e. Note: this fix requires a OHP ELMconfig OBD2 scanner to be purchased\u003c\/li\u003e\n\u003cli\u003eNOTE: These housings have been designed for, and tested on, US-Spec vehicles. Other countries' compatibility may vary and is not guaranteed nor always known.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984413614248,"sku":"HEADTAILKIT22","price":1953.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152712.010.jpg?v=1759353500"},{"product_id":"morimoto-11-16-ford-super-duty-amber-drl-heads-and-smoked-tails-headtailkit23","title":"11-16 Ford Super Duty Amber DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford Super Duty, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Super Duty LED headlights on the market today. OEM Plus: We live, eat, and sleep headlights. While the XB LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2011-16 Super Duty headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. In our testing, the F150 version even out-performed the expensive OEM LED headlights.... and the Super Duty model will out perform even those with a low beam that will be 2x as bright, and their bi-LED high beams. DOT Approved: Make no mistake, these XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB Super Duty LED headlights are designed to work without any modifications. These 2011-16 Super Duty headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram Amber LEDs and is insanely bright, easily visible during the day. A parallel row of LED's encompasses the entire surface area of the amber DRL, and when activated - runs in sequence towards the outer vertical edge of the housings. While that feature is bound to look amazing, for those who are a bit more traditional - they can also be setup to run as solid on\/off style signals too. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Super Duty headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete 2011-16 Super Duty headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984413679784,"sku":"HEADTAILKIT23","price":2038.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152713.010_e0479dd5-e196-4841-b2de-358f5bcbae25.jpg?v=1760017976"},{"product_id":"morimoto-11-16-ford-super-duty-hybrid-heads-and-smoked-tails-headtailkit24","title":"11-16 Ford Super Duty Hybrid Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Special: If you ask us, the 11-16 Super Duty reigns king as the most badass Heavy Duty truck on the road today. What's not to like? The thing is a beast. Well--aside from the basic headlights. If you've got big bucks burning a hole in your pocket, then the high-end XB headlights from Morimoto are a no brainer. If, however, your brain is telling you to save some dough while accomplishing the mission then go for XB Hybrid LEDs for your Ford Super Duty. Bang for the Buck: The XB Hybrids share many of the same core components developed for the top-of-the-line series from Morimoto, without some of the features that make them considerably more expensive. That said... the Super Duty Hybrid LED headlights are hardly a compromise. True reflector optics for the DRL. Killer light output. Good looks... all wrapped up inside of an OEM-grade housing and backed with a solid five-year warranty. Compared to the more expensive Morimoto XB LEDs, these use two integrated LED projectors (instead of three). High Performance: When it comes to light output, these Super Duty headlights surely will not disappoint. Not all Ford guys are all about bling -- light output is important too--and there is no lack of luminosity here. The Hybrids have a powerful, wide, and bright led low beam projector, and a dedicated led high beam projector too. Their optics were developed specifically for use the hybrid lineup to produce an amazing beam pattern despite the affordable price point. Unlike other \"headlight upgrades\" that look decent, these look great, and will most definitely make driving in the dark a pleasure. Bring on the night! DOT Compliant: For the ladies and gents that care about street legality, their dual led projector optics meet \u0026amp; exceed all SAE, DOT, and FVMSS108 regulations. They come out of the box aimed to factory specs and are also fully adjustable for those of you with lifted trucks. Plug N Play: When it comes to wiring, it doesn't get much easier than this. The XB Hybrid LED headlights are designed to work on your Super Duty without any modifications, regardless of which trim level you have. They will plug into the factory connectors for the stock headlights and will work seamlessly without any issues at all. You will however have to add one cable, which comes included, to power the DRL--but that's Plug N Play with one of the slots in your fuse box. No big deal. See the installation guide PDF for more information. Tail Lights: Ford Super Duty Tail Lights: While every biz in the aftermarket has a catalog full of products for these trucks, somehow no brand has yet to deliver a worthy set of tail lights for this body style... until now. The Morimoto XB LED tail lights are the category killer that every 99-16 F250, F350, or F450 owner has been waiting for!Reverse Lights: Often over-looked, but not with the Morimoto XB tail lights for the Super Duties. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's Backup-Boost system allows you to plug n play with the optional LED Reverse Light Bar, which mounts to the top of your license plate frame and provides an extra 5000 lumens of controlled light output when in backing up. Yeah, Morimoto customers like to see where they're going... no matter the direction!Style: Dropping in some rear-facing LED chips would have been much easier and far less expensive to produce due to the tight spacing inside these housings... and while thats what every other brand to date has done, thats not how we roll. Instead, these have a much more modern look. Three sets of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 99-16 Super Duties!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984413712552,"sku":"HEADTAILKIT24","price":1528.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152714.010_537f3a04-1431-4f34-b71d-c3d53188d7e4.jpg?v=1760017981"},{"product_id":"morimoto-15-17-f-150-white-drl-heads-and-red-tails-headtailkit25","title":"15-17 F-150 White DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford F150, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best F150 LED headlights on the market today. Second Gen Update: The 15-17 F150 XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original F150 XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the F150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2015-2017 F150 headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. DOT Approved: Make no mistake, these Ford XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB F150 LED headlights are designed to work without any modifications. These 2015-2017 F150 headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. No error codes, no flickering, hyper-flashing, or radio interference. These Ford LED headlights can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of amber LED's provides the turn signal function. You can set up these Ford XB LED headlights to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your 2015-2017 F150 headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, you'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's F150 LED headlights, that job is painless! Since they're sealed with Butyl Rubber, these Ford XB LED headlights are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984414367912,"sku":"HEADTAILKIT25","price":2242.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152715.010_2aeafcf0-9818-498d-904b-82d3d94c5c0b.jpg?v=1760017987"},{"product_id":"morimoto-15-17-f-150-amber-drl-heads-and-red-tails-headtailkit26","title":"15-17 F-150 Amber DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford Raptor, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Raptor LED headlights on the market today. Second Gen Update: The 16+ Raptor XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original Raptor XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the Raptor LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. OEM+ Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. PLEASE NOTE: On the Amber\/Raptor edition, the LED DRL is extremely bright and DOES NOT DIM (just like the OE LED headlights) Plug-n-Play: Wiring is easy too! The XB Raptor LED headlights are designed to work without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of LED's provides the turn signal function. You can set them up to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Raptor headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, You'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's Raptor LED headlights, that job is painless! Since they're sealed with Butyl Rubber, they are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984414433448,"sku":"HEADTAILKIT26","price":2157.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152716.010_123f7c77-9294-4d0b-b5d6-273e53925109.jpg?v=1760017993"},{"product_id":"morimoto-15-17-f-150-hybrid-heads-and-red-tails-headtailkit27","title":"15-17 F-150 Hybrid Heads and Red Tails","description":"\u003cp\u003eHeadlights: BANG FOR THE BUCK: When they came out in late 2018, The XB LED headlights from Morimoto set the bar higher than everything else in the aftermarket, and they're still the benchmark by a longshot to this day. But for many enthusiasts looking for the best, the XB's were simply too expensive. With the introduction of the new Hybrid version, there is finally an XB that everybody can afford. Using a combination of both LED \u0026amp; Incandescent bulbs (thus, Hybrid) these offer much of the same amazing features that the originals do for those who want to be XB-ballers on a budget. QUALITY, INSIDE AND OUT: Thanks to sharing many of the same core components developed for the top of the line model, the new Hybrid series headlights from Morimoto are hardly a compromise. They use the same OEM-grade housing. The same optics for the DRL. They offer the same five-year warranty too. The fit and finish on the Morimoto Ford F150 LED headlights is far superior than anything else out there in this price range, guaranteed. PERFORMANCE: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. The XB Hybrid headlights have a powerful, wide, and bright LED low beam projector, and a dedicated LED high beam projector too. Their optics were specially developed just for use the hybrid lineup to produce an amazing beam pattern despite the affordable price point. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their Dual LED projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical\/lateral adjusters. PLUG-N-PLAY: Wiring is easy too! Morimoto's Hybrid XB F150 LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. (Note, these will not work on trucks with OEM LED headlights) LED DAYTIME RUNNING LIGHT: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. The DRL will automatically dim down with the parking lights and low beams for full compliance. The components here are identical to what's in the big-boy version of the XB's and one of the best and most distinguishing features compared to cheaper alternatives out there. WELL-BUILT: If you're going to invest in your truck, do it right the first time. The XB hybrid headlights are built with UV-coated polycarbonate lenses that will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. Morimoto's XB LED headlights have proven to hold up quite well after being on the market for quite some time now, which is very confidence inspiring when most cheap headlights start to yellow within six months of installation. Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984415023272,"sku":"HEADTAILKIT27","price":1587.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152717.010_99580636-0984-41b6-baa4-d3e62483c0d4.jpg?v=1760018000"},{"product_id":"morimoto-15-17-f-150-white-drl-heads-and-smoked-tails-headtailkit28","title":"15-17 F-150 White DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford F150, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best F150 LED headlights on the market today. Second Gen Update: The 15-17 F150 XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original F150 XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the F150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and the fit and finish of these 2015-2017 F150 headlights is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. DOT Approved: Make no mistake, these Ford XB LED headlights will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. Plug-n-Play: Wiring is easy too! The XB F150 LED headlights are designed to work without any modifications. These 2015-2017 F150 headlights will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. No error codes, no flickering, hyper-flashing, or radio interference. These Ford LED headlights can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of amber LED's provides the turn signal function. You can set up these Ford XB LED headlights to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your 2015-2017 F150 headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, you'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's F150 LED headlights, that job is painless! Since they're sealed with Butyl Rubber, these Ford XB LED headlights are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984415088808,"sku":"HEADTAILKIT28","price":2216.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152718.010_472d8cdd-4e95-4460-adca-30ecd679b32e.jpg?v=1760018006"},{"product_id":"morimoto-15-17-f-150-amber-drl-heads-and-smoked-tails-headtailkit29","title":"15-17 F-150 Amber DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you don't have LED powered headlights on your Ford Raptor, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Raptor LED headlights on the market today. Second Gen Update: The 16+ Raptor XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the Raptor are back on top, and will be hard to top, period! More Light Output: The original Raptor XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered! Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor! OEM Plus: We live, eat, and sleep headlights. While the Raptor LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light. OEM+ Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. PLEASE NOTE: On the Amber\/Raptor edition, the LED DRL is extremely bright and DOES NOT DIM (just like the OE LED headlights) Plug-n-Play: Wiring is easy too! The XB Raptor LED headlights are designed to work without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram LEDs and is insanely bright, easily visible during the day. At the top of the housings, a row of LED's provides the turn signal function. You can set them up to run as sequential or solid signals according to your preference. Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Raptor headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring. They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, You'll be facing hours and hours of labor and a high probability for \"hack job\" status in the end. With Morimoto's Raptor LED headlights, that job is painless! Since they're sealed with Butyl Rubber, they are much easier to open, customize\/paint and then reseal! Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984415154344,"sku":"HEADTAILKIT29","price":2131.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152719.010_8f797d51-0521-47bf-8bb9-2f9a999650d3.jpg?v=1760018012"},{"product_id":"morimoto-09-14-f-150-evo-heads-and-red-tails-headtailkit3","title":"Morimoto 09-14 F-150 Evo Heads and Red Tails","description":"Headlights: Evolutionary: A simple design refresh would have been easy, but that's not what this is all about. The all-new XB Evo headlights are a showcase of everything Morimoto is made of. From concept to completion. Packed with features that demonstrate a true attention to detail including the latest in technology, compliance, quality, and styling, these headlights are designed for enthusiasts who are serious about all the above, even if it comes at a premium. Maximum Performance: Thanks to an all-new generation of Morimoto Bi-LED projectors, the XB Evo headlights will meet \u0026amp; exceed the highest standards for headlight performance that are set by the Insurance Institute for Highway Safety... which is a tough mark even for most modern luxury automakers. Here, the F-150 XB Evo headlight utilizes dual Bi-LED projectors to deliver unmatched light output, with an incredibly bright and wide low beam, and a high beam that destroys darkness. In high beam mode, two dedicated 1Banger combo pods add even more intensity and coverage*. All optics are powered by the latest OE-grade automotive LEDs from Nichia in Japan. On Road: The Morimoto XB Evo Headlights are DOT compliant with all FVMSS108 regulations for on-road use in the USA*. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The vertical aim is fully adjustable within +\/- 6 degrees for a perfect alignment on any F-150, even with a lift. The system was designed in California by Morimoto’s lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does. *Note: Due to the separate adjuster on the auxiliary high beam pods, this feature is not compliant for on-road use. Off Road: Yes, you read that correctly. Out of the box, XB Evos are only producing a fraction of their potential intensity for compliance reasons. Want more light for your off-road adventures? The optional Supercharged LED driver boosts both low and high beam intensity by 30-50% - all without sacrificing reliability or warranty. While the Supercharged drivers easily enable the XB Evo to outshine every other headlight for the F-150 on the market, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads. Frost-Free System: Our patent-pending heating system warms the surface temperature of the headlight lens to minimize frost buildup when driving through wet and snowy conditions in the wintertime. When the temperature drops below 5 degrees Celsius, the system is enabled to operate on your command by flashing the high beams four times. From there, it will automatically maintain temps within the headlight housing to mitigate frost buildup on the lens. A cold-climate game changer, this feature ensures the output of your XB Evo headlights will remain strong when you need it most. DRL Optics: The turn signals and daytime running lights illuminate glass-like 3D optics with special surface textures, which enables maximum intensity from all viewing angles, easily out-shining low-tech DRL optics found in most every other aftermarket headlight. Easy to Personalize: The signal swap system allows users to personalize how the daytime running lights and turn signals operate according to personal preference, all through a simple plug n play key on the back of each headlight. The daytime running light can be configured to run full-time in either white or amber with no compromise in intensity either way. The turn signals can operate sequentially from side to side, or in a more traditional on-off mode with an elegant fade-off effect. Start-up Sequence: When starting your F-150, the optics will automatically illuminate in a multi-stage sequence before turning back off. Unlike every other feature baked into XB Evo headlights, this does absolutely nothing to improve performance. But executed properly, it does look cool, and there's nothing wrong with that! OE Fit \u0026amp; Installation: The XB Evo headlights are expertly crafted to match all OE specifications to ensure perfect fitment and hassle-free installation. They will bolt onto the original mounting points and line up to the surrounding sheet-metal without any massaging, and then plug into the factory wire harness and then work without errors on the dash, nor flickering, flashing, or radio interference. Thoughtfully engineered for a modification-free install. No factory warranties void. No headaches. Well-Built: This product is completely designed, engineered \u0026amp; tested in the USA by the Morimoto team to meet the high expectations of our customers. Nichia LEDs from Japan are used throughout. All wiring and connections are OE-grade. When it comes to UV protection, OE Toyota headlights are industry-best, which is why we've formulated a new hard coating that exceeds their 3,000-hour standard for resistance against cracking, fading, and yellowing lenses from UV exposure. The list goes on but as the saying goes: you get what you pay for. XB Evo headlights aren't cheap, but they are built to a high standard and should easily last the life of your F-150! We’re proud to stand behind the product with an industry-leading five-year warranty. Tail Lights: Ford F-150: While every biz in the aftermarket has a catalog full of products for the 09-14 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!  Style: Inspired by the design of the more modern OEM LED tail lights from later generation trucks, these look right at-home on the rear end of the 12th Gen. Two clusters of four 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-14 F-150s!  Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD \/ Right Hand Traffic Only\u003c\/li\u003e\n\u003cli\u003eOutput (Standard Drivers): DOT \/ FVMSS108 Compliant (LB2V and UB2)\u003c\/li\u003e\n\u003cli\u003eOutput (Supercharged Drivers): +30-50% (Non-Compliant)\u003c\/li\u003e\n\u003cli\u003eMain Optics: 2x Type 1 Ishida Optic Bi-LED (1x Nichia NC4W193F @ 750mA)\u003c\/li\u003e\n\u003cli\u003eHigh Beam Assist: 2x Morimoto 1Banger NCS Combo Beam*\u003c\/li\u003e\n\u003cli\u003eFunctions: Low, High, Park, Turn, DRL, Welcome, and Lens Heating\u003c\/li\u003e\n\u003cli\u003eTurn Signal Modes: Sequential or Fade Off (Configurable)\u003c\/li\u003e\n\u003cli\u003eDRL Colors: White or Amber (Configurable)\u003c\/li\u003e\n\u003cli\u003eDRL\/Signal Optics: Glass-like 3D Optics\u003c\/li\u003e\n\u003cli\u003eFrost-Free System: Logic Controlled 50W Ceramic w\/ circulation fans\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB Evo Headlights: Ford F-150 (09-14 \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford F-150 (09-14 \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord F-150: 2009-2014 (all trim levels, factory halogen \u0026amp; factory HID\/xenon equipped models)\u003c\/li\u003e\n\u003cli\u003eFord SVT Raptor: 2010-2014\u003c\/li\u003e\n\u003cli\u003eTrim Levels: XL, STX, XLT, FX2, FX4, Lariat, King Ranch, Platinum, SVT Raptor, Limited\u003c\/li\u003e\n\u003cli\u003eSupercharged Drivers: LF2-DRVSC12 (Optional, sold separately)\u003c\/li\u003e\n\u003cli\u003eReplaces Ford Part #: FO2503289, FO2502289, FO2503287, FO2502287, DL3Z13008A, DL3Z13008B, DL3Z13008EB, DL3Z13008EC, FR560B1A12SD6V, DL3Z13008DB, DL3Z13008FB, DL3Z13008BB, DL3Z13008CB\u003c\/li\u003e\n\u003cli\u003eNote: These headlights were developed for compatibility with North American vehicles. Morimoto does not guarantee compatibility on trucks outside of North America.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984415776936,"sku":"HEADTAILKIT3","price":1953.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152720.010.jpg?v=1759353535"},{"product_id":"morimoto-15-17-f-150-hybrid-heads-and-smoked-tails-headtailkit30","title":"15-17 F-150 Hybrid Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: BANG FOR THE BUCK: When they came out in late 2018, The XB LED headlights from Morimoto set the bar higher than everything else in the aftermarket, and they're still the benchmark by a longshot to this day. But for many enthusiasts looking for the best, the XB's were simply too expensive. With the introduction of the new Hybrid version, there is finally an XB that everybody can afford. Using a combination of both LED \u0026amp; Incandescent bulbs (thus, Hybrid) these offer much of the same amazing features that the originals do for those who want to be XB-ballers on a budget. QUALITY, INSIDE AND OUT: Thanks to sharing many of the same core components developed for the top of the line model, the new Hybrid series headlights from Morimoto are hardly a compromise. They use the same OEM-grade housing. The same optics for the DRL. They offer the same five-year warranty too. The fit and finish on the Morimoto Ford F150 LED headlights is far superior than anything else out there in this price range, guaranteed. PERFORMANCE: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. The XB Hybrid headlights have a powerful, wide, and bright LED low beam projector, and a dedicated LED high beam projector too. Their optics were specially developed just for use the hybrid lineup to produce an amazing beam pattern despite the affordable price point. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their Dual LED projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical\/lateral adjusters. PLUG-N-PLAY: Wiring is easy too! Morimoto's Hybrid XB F150 LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. (Note, these will not work on trucks with OEM LED headlights) LED DAYTIME RUNNING LIGHT: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. The DRL will automatically dim down with the parking lights and low beams for full compliance. The components here are identical to what's in the big-boy version of the XB's and one of the best and most distinguishing features compared to cheaper alternatives out there. WELL-BUILT: If you're going to invest in your truck, do it right the first time. The XB hybrid headlights are built with UV-coated polycarbonate lenses that will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. Morimoto's XB LED headlights have proven to hold up quite well after being on the market for quite some time now, which is very confidence inspiring when most cheap headlights start to yellow within six months of installation. Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984415875240,"sku":"HEADTAILKIT30","price":1562.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152721.010_4222e18a-34d0-4e66-a2dd-6d6c1e396c9f.jpg?v=1760018025"},{"product_id":"morimoto-17-19-ford-super-duty-white-drl-heads-and-smoked-tails-headtailkit31","title":"17-19 Ford Super Duty White DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 17-19 Super Duty and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're ready for an upgrade, the Morimoto XB LED headlights for the Ford Super Duty should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package.Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the Gen II Super Duty LED headlights from Morimoto look. Although they have four projectors like the original recipe, the internals on these are next level... but not over-done... everything is just perfect. They could pass for the OEM LED headlights on 2030 model year Super Duty. Ultra modern, but not over the top.Daytime Running Lights: The daytime running light shares the same overall shape as the OEM LED headlights on the newer 2020 trucks, but it's way brighter--and has that cool Y-shaped optic in the middle. The same optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative.Startup Sequence: When the daytime running light first kicks on, the projectors will illuminate in a two-stage sequence before turning back off. Forewarning: This is addicting... so you may find yourself wasting time out in the driveway starting the truck repeatedly just to watch. Though that does absolutely nothing for performance, the guys at Morimoto have not overlooked the importance of light output.Unmatched Visibility: These use a new generation of advanced Bi-LED projectors that produce a ton of light output. You get four low beams per light, Yes, that's 8 low beam optics, two of which do double duty as the high beams (making 4 high beam projectors). The first-gen headlights were much better than the OEM halogen and OEM LED headlights, and the new Gen II takes it to the next level with 57% more intensity beyond that, making them the undisputed category king when it comes to headlight upgrades for the Super Duty.DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford Super Duty are still fully compliant. Their quad-projector optics meet exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well.Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Tail Lights: Ford Super Duty: Given the popularity of the XB headlights for the Super Duty from Morimoto, its evident that Super Duty owners aren't the crowd who cuts corners when it comes to upgrades for their truck... and while theres no shortage of aftermarket parts out there, somehow no brand has yet to deliver a worthy set of tail lights for this truck ...until now. The Morimoto XB LED tail lights for the 2017-2022 Ford Super Duties are the category killer you have all been waiting for!Ultimate Flex: Compatible with all versions of the Ford Super Duty from 2017 to 2022, they will fit all trucks with OE incandescent, OE incandescent with BLIS, or the OE LED with BLIS tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the Super Duty. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's backup light boost setup allows you to plug n play with the optional XB Backup Light Boost Bar that mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of modern OEM LED tail lights from Ford, these look at-home in the rear end of the Super Duty. Three rows of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set of Super Duty tails on the road.Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984416497832,"sku":"HEADTAILKIT31","price":2341.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152722.010_ead4b600-b3f6-4d24-a205-4fa3e26dd3eb.jpg?v=1760018031"},{"product_id":"morimoto-17-19-ford-super-duty-amber-drl-heads-and-smoked-tails-headtailkit32","title":"17-19 Ford Super Duty Amber DRL Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 17-19 Super Duty and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're ready for an upgrade, the Morimoto XB LED headlights for the Ford Super Duty should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package.Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the Gen II Super Duty LED headlights from Morimoto look. Although they have four projectors like the original recipe, the internals on these are next level... but not over-done... everything is just perfect. They could pass for the OEM LED headlights on 2030 model year Super Duty. Ultra modern, but not over the top.Daytime Running Lights: The daytime running light shares the same overall shape as the OEM LED headlights on the newer 2020 trucks, but it's way brighter --and has that cool Y-shaped optic in the middle. The same optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative.Startup Sequence: When the daytime running light first kicks on, the projectors will illuminate in a two-stage sequence before turning back off. Forewarning: This is addicting... so you may find yourself wasting time out in the driveway starting the truck repeatedly just to watch. Though that does absolutely nothing for performance, the guys at Morimoto have not overlooked the importance of light output.Unmatched Visibility: These use a new generation of advanced Bi-LED projectors that produce a ton of light output. You get four low beams per light, Yes, that's 8 low beam optics, two of which do double duty as the high beams (making 4 high beam projectors). The first-gen headlights were much better than the OEM halogen and OEM LED headlights, and the new Gen II takes it to the next level with 57% more intensity beyond that, making them the undisputed category king when it comes to headlight upgrades for the Super Duty.DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford Super Duty are still fully compliant. Their quad-projector optics meet exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well.Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Tail Lights: Ford Super Duty: Given the popularity of the XB headlights for the Super Duty from Morimoto, its evident that Super Duty owners aren't the crowd who cuts corners when it comes to upgrades for their truck... and while theres no shortage of aftermarket parts out there, somehow no brand has yet to deliver a worthy set of tail lights for this truck ...until now. The Morimoto XB LED tail lights for the 2017-2022 Ford Super Duties are the category killer you have all been waiting for!Ultimate Flex: Compatible with all versions of the Ford Super Duty from 2017 to 2022, they will fit all trucks with OE incandescent, OE incandescent with BLIS, or the OE LED with BLIS tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the Super Duty. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's backup light boost setup allows you to plug n play with the optional XB Backup Light Boost Bar that mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of modern OEM LED tail lights from Ford, these look at-home in the rear end of the Super Duty. Three rows of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set of Super Duty tails on the road.Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984416530600,"sku":"HEADTAILKIT32","price":2341.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152723.010_76c27f02-7d32-462a-b6b2-f062091469d4.jpg?v=1760018037"},{"product_id":"morimoto-17-19-ford-super-duty-hybrid-heads-and-smoked-tails-headtailkit33","title":"17-19 Ford Super Duty Hybrid Heads and Smoked Tails","description":"\u003cp\u003eHeadlights: Special: If you ask us, the 17-19 Super Duty reigns king as the most badass Heavy Duty truck on the road today. What’s not to like? The thing is a beast. Well--aside from the basic headlights. If you've got big bucks burning a hole in your pocket, then the high-end XB headlights from Morimoto are a no brainer. If, however, your brain is telling you to save some dough while accomplishing the mission then go for XB Hybrid LEDs for your Ford Super Duty.  Bang for the Buck: The XB Hybrids share many of the same core components developed for the top-of-the-line series from Morimoto, without some of the features that make them considerably more expensive. That said... the Super Duty Hybrid LED headlights are hardly a compromise. True reflector optics for the DRL. Killer light output. Good looks... all wrapped up inside of an OEM-grade housing and backed with a solid five-year warranty. Compared to the more expensive Morimoto XB LEDs, these use two integrated LED projectors (instead of four).  High Performance: When it comes to light output, these Super Duty headlights surely will not disappoint. Not all Ford guys are all about bling -- light output is important too--and there is no lack of luminosity here. The Hybrids have a powerful, wide, and bright led low beam projector, and a dedicated led high beam projector too. Their optics were specially developed just last year specifically for use the hybrid lineup to produce an amazing beam pattern despite the affordable price point. Unlike other \"headlight upgrades\" that look decent, these look great, and will most definitely make driving in the dark a pleasure. Bring on the night!  DOT Approved: for the ladies and gents that care about street legality, their dual led projector optics meet \u0026amp; exceed all SAE, DOT, and FVMSS108 regulations. They come out of the box aimed to factory specs and are also fully adjustable for those of you with lifted trucks.  Plug N Play: When it comes to wiring, it doesn't get much easier than this. The XB Hybrid LED headlights are designed to work on your new Super Duty without any modifications, regardless of which trim level you have. They will plug into the factory connectors for the stock headlights and will work seamlessly without any issues at all. You will however have to add one cable, which  comes included, to power the DRL--but that's Plug N Play with one of the slots in your fuse box. No big deal. See the installation guide PDF for more information. Tail Lights: Ford Super Duty: Given the popularity of the XB headlights for the Super Duty from Morimoto, its evident that Super Duty owners aren't the crowd who cuts corners when it comes to upgrades for their truck... and while theres no shortage of aftermarket parts out there, somehow no brand has yet to deliver a worthy set of tail lights for this truck ...until now. The Morimoto XB LED tail lights for the 2017-2022 Ford Super Duties are the category killer you have all been waiting for!Ultimate Flex: Compatible with all versions of the Ford Super Duty from 2017 to 2022, they will fit all trucks with OE incandescent, OE incandescent with BLIS, or the OE LED with BLIS tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the Super Duty. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's backup light boost setup allows you to plug n play with the optional XB Backup Light Boost Bar that mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of modern OEM LED tail lights from Ford, these look at-home in the rear end of the Super Duty. Three rows of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set of Super Duty tails on the road.Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984417153192,"sku":"HEADTAILKIT33","price":1831.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152724.010_47c285ef-f8dc-4d26-9ec1-a36e5d701601.jpg?v=1760018044"},{"product_id":"morimoto-17-19-ford-super-duty-white-drl-heads-and-red-tails-headtailkit34","title":"17-19 Ford Super Duty White DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 17-19 Super Duty and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're ready for an upgrade, the Morimoto XB LED headlights for the Ford Super Duty should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package.Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the Gen II Super Duty LED headlights from Morimoto look. Although they have four projectors like the original recipe, the internals on these are next level... but not over-done... everything is just perfect. They could pass for the OEM LED headlights on 2030 model year Super Duty. Ultra modern, but not over the top.Daytime Running Lights: The daytime running light shares the same overall shape as the OEM LED headlights on the newer 2020 trucks, but it's way brighter--and has that cool Y-shaped optic in the middle. The same optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative.Startup Sequence: When the daytime running light first kicks on, the projectors will illuminate in a two-stage sequence before turning back off. Forewarning: This is addicting... so you may find yourself wasting time out in the driveway starting the truck repeatedly just to watch. Though that does absolutely nothing for performance, the guys at Morimoto have not overlooked the importance of light output.Unmatched Visibility: These use a new generation of advanced Bi-LED projectors that produce a ton of light output. You get four low beams per light, Yes, that's 8 low beam optics, two of which do double duty as the high beams (making 4 high beam projectors). The first-gen headlights were much better than the OEM halogen and OEM LED headlights, and the new Gen II takes it to the next level with 57% more intensity beyond that, making them the undisputed category king when it comes to headlight upgrades for the Super Duty.DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford Super Duty are still fully compliant. Their quad-projector optics meet exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well.Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Tail Lights: Ford Super Duty: Given the popularity of the XB headlights for the Super Duty from Morimoto, its evident that Super Duty owners aren't the crowd who cuts corners when it comes to upgrades for their truck... and while theres no shortage of aftermarket parts out there, somehow no brand has yet to deliver a worthy set of tail lights for this truck ...until now. The Morimoto XB LED tail lights for the 2017-2022 Ford Super Duties are the category killer you have all been waiting for!Ultimate Flex: Compatible with all versions of the Ford Super Duty from 2017 to 2022, they will fit all trucks with OE incandescent, OE incandescent with BLIS, or the OE LED with BLIS tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the Super Duty. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's backup light boost setup allows you to plug n play with the optional XB Backup Light Boost Bar that mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of modern OEM LED tail lights from Ford, these look at-home in the rear end of the Super Duty. Three rows of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set of Super Duty tails on the road.Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984417185960,"sku":"HEADTAILKIT34","price":2328.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152725.010_1fc355d8-f720-4f56-8bed-e88ec2f2ae56.jpg?v=1760018049"},{"product_id":"morimoto-17-19-ford-super-duty-amber-drl-heads-and-red-tails-headtailkit35","title":"17-19 Ford Super Duty Amber DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: Game Changer: The game has just changed, again. If you've got a 17-19 Super Duty and you paid extra for the OEM LED headlights, well... hind sight hurts doesn't it? If you're ready for an upgrade, the Morimoto XB LED headlights for the Ford Super Duty should be the first thing on your wish list. It's hard to imagine anything better than this when it comes to looks, performance, and functionality. They are the full package.Future Spec: Alright so where do we begin? Lets throw subjectivity out the door and talk about how great the Gen II Super Duty LED headlights from Morimoto look. Although they have four projectors like the original recipe, the internals on these are next level... but not over-done... everything is just perfect. They could pass for the OEM LED headlights on 2030 model year Super Duty. Ultra modern, but not over the top.Daytime Running Lights: The daytime running light shares the same overall shape as the OEM LED headlights on the newer 2020 trucks, but it's way brighter --and has that cool Y-shaped optic in the middle. The same optics do double duty as the turn signals - which like other XB LED headlights from Morimoto feature the full sequential setup, but can be also be ran in an instant-on\/off mode for folks who want something a little more conservative.Startup Sequence: When the daytime running light first kicks on, the projectors will illuminate in a two-stage sequence before turning back off. Forewarning: This is addicting... so you may find yourself wasting time out in the driveway starting the truck repeatedly just to watch. Though that does absolutely nothing for performance, the guys at Morimoto have not overlooked the importance of light output.Unmatched Visibility: These use a new generation of advanced Bi-LED projectors that produce a ton of light output. You get four low beams per light, Yes, that's 8 low beam optics, two of which do double duty as the high beams (making 4 high beam projectors). The first-gen headlights were much better than the OEM halogen and OEM LED headlights, and the new Gen II takes it to the next level with 57% more intensity beyond that, making them the undisputed category king when it comes to headlight upgrades for the Super Duty.DOT Approved: All that goodness, and the Morimoto XB LED headlights for the new Ford Super Duty are still fully compliant. Their quad-projector optics meet exceed all SAE, DOT, and FMVSS108 standards. The US market lights will be equipped with amber side markers as well.Plug and Play: The Installation is relatively easy too. These headlights are designed to work on your truck without any modifications. They will plug into the factory connectors and fit flush with all pre-existing mounting points. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Tail Lights: Ford Super Duty: Given the popularity of the XB headlights for the Super Duty from Morimoto, its evident that Super Duty owners aren't the crowd who cuts corners when it comes to upgrades for their truck... and while theres no shortage of aftermarket parts out there, somehow no brand has yet to deliver a worthy set of tail lights for this truck ...until now. The Morimoto XB LED tail lights for the 2017-2022 Ford Super Duties are the category killer you have all been waiting for!Ultimate Flex: Compatible with all versions of the Ford Super Duty from 2017 to 2022, they will fit all trucks with OE incandescent, OE incandescent with BLIS, or the OE LED with BLIS tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the Super Duty. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's backup light boost setup allows you to plug n play with the optional XB Backup Light Boost Bar that mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of modern OEM LED tail lights from Ford, these look at-home in the rear end of the Super Duty. Three rows of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set of Super Duty tails on the road.Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984417317032,"sku":"HEADTAILKIT35","price":2328.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152726.010_23231217-0d92-4473-8653-b0ea17c74ec9.jpg?v=1760018054"},{"product_id":"morimoto-17-19-ford-super-duty-hybrid-heads-and-red-tails-headtailkit36","title":"17-19 Ford Super Duty Hybrid Heads and Red Tails","description":"\u003cp\u003eHeadlights: Special: If you ask us, the 17-19 Super Duty reigns king as the most badass Heavy Duty truck on the road today. What’s not to like? The thing is a beast. Well--aside from the basic headlights. If you've got big bucks burning a hole in your pocket, then the high-end XB headlights from Morimoto are a no brainer. If, however, your brain is telling you to save some dough while accomplishing the mission then go for XB Hybrid LEDs for your Ford Super Duty.  Bang for the Buck: The XB Hybrids share many of the same core components developed for the top-of-the-line series from Morimoto, without some of the features that make them considerably more expensive. That said... the Super Duty Hybrid LED headlights are hardly a compromise. True reflector optics for the DRL. Killer light output. Good looks... all wrapped up inside of an OEM-grade housing and backed with a solid five-year warranty. Compared to the more expensive Morimoto XB LEDs, these use two integrated LED projectors (instead of four).  High Performance: When it comes to light output, these Super Duty headlights surely will not disappoint. Not all Ford guys are all about bling -- light output is important too--and there is no lack of luminosity here. The Hybrids have a powerful, wide, and bright led low beam projector, and a dedicated led high beam projector too. Their optics were specially developed just last year specifically for use the hybrid lineup to produce an amazing beam pattern despite the affordable price point. Unlike other \"headlight upgrades\" that look decent, these look great, and will most definitely make driving in the dark a pleasure. Bring on the night!  DOT Approved: for the ladies and gents that care about street legality, their dual led projector optics meet \u0026amp; exceed all SAE, DOT, and FVMSS108 regulations. They come out of the box aimed to factory specs and are also fully adjustable for those of you with lifted trucks.  Plug N Play: When it comes to wiring, it doesn't get much easier than this. The XB Hybrid LED headlights are designed to work on your new Super Duty without any modifications, regardless of which trim level you have. They will plug into the factory connectors for the stock headlights and will work seamlessly without any issues at all. You will however have to add one cable, which  comes included, to power the DRL--but that's Plug N Play with one of the slots in your fuse box. No big deal. See the installation guide PDF for more information. Tail Lights: Ford Super Duty: Given the popularity of the XB headlights for the Super Duty from Morimoto, its evident that Super Duty owners aren't the crowd who cuts corners when it comes to upgrades for their truck... and while theres no shortage of aftermarket parts out there, somehow no brand has yet to deliver a worthy set of tail lights for this truck ...until now. The Morimoto XB LED tail lights for the 2017-2022 Ford Super Duties are the category killer you have all been waiting for!Ultimate Flex: Compatible with all versions of the Ford Super Duty from 2017 to 2022, they will fit all trucks with OE incandescent, OE incandescent with BLIS, or the OE LED with BLIS tail lights... Yes you read that correctly. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the Super Duty. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's backup light boost setup allows you to plug n play with the optional XB Backup Light Boost Bar that mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of modern OEM LED tail lights from Ford, these look at-home in the rear end of the Super Duty. Three rows of 3D light blades are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set of Super Duty tails on the road.Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984417906856,"sku":"HEADTAILKIT36","price":1818.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152727.010_eac35e67-b275-4b10-825a-b83d7b0edcba.jpg?v=1760018060"},{"product_id":"morimoto-18-20-ford-f-150-white-drl-heads-and-red-tails-headtailkit37","title":"18-20 Ford F-150 White DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you're still running oldschool halogen headlights on your 18-20 Ford F150, then you're just behind the times! If you're running a set of different aftermarket headlights, well, these should make you second guess that decision. The second gen Morimoto XB LED F150 headlights: Look amazing. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform all of the alternatives. Easily making them the best LED headlights on the market today for the F150.Second Gen Update: The 18+ F150 XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the F150 are back on top, and will be hard to top, period!More Light Output: The original F150 XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered!Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor!DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters. US market lights are equipped with amber side markers. Plug-n-Play: Wiring is easy too! The Morimoto F150 LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. While that feature will cause others to mistake your truck for an Audi; for those who are a bit more traditional they can also be setup to run as solid on\/off style signals too.Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These use the same external housing \/ lens from the gen one version, and those have held up like OEM after a few years on the market.OEM Plus: We live, eat, and sleep headlights. While the F150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. They Look: Amazing. At least in our opinion! The design of the second Gen F150 LED heads was inspired by the OEM LED headlights from the new Ford Expedition. The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. The piano black trim and smoked gray diffusers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984418005160,"sku":"HEADTAILKIT37","price":2157.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152728.010_4f1145ea-db60-4709-8161-df4271ec7990.jpg?v=1760018065"},{"product_id":"morimoto-18-20-ford-f-150-amber-drl-heads-and-red-tails-headtailkit38","title":"18-20 Ford F-150 Amber DRL Heads and Red Tails","description":"\u003cp\u003eHeadlights: No Substitutes: If you're still running oldschool halogen headlights on your 18-20 Ford F150, then you're just behind the times! If you're running a set of different aftermarket headlights, well, these should make you second guess that decision. The second gen Morimoto XB LED F150 headlights: Look amazing. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform all of the alternatives. Easily making them the best LED headlights on the market today for the F150.Second Gen Update: The 18+ F150 XB headlights broke the internet when they came out... and while they were the undisputed king for quite a while, other options from brands like Alpharex came out that offered a little more light. In true Morimoto fashion, nothing gets left alone for long and now there is no question: The XB LED Heads for the F150 are back on top, and will be hard to top, period!More Light Output: The original F150 XB heads used two projectors on top for the low beam, and two on the bottom as a dedicated high beam. The new setup utilizes all four projectors for the low beam and has a dual Bi-LED setup for the high beam. The results? 200% more light output and a better distribution of light for improved visibility in the distance and off to the sides of the road. Asked and answered!Start-Up Sequence: And if the optical upgrades weren't enough, the cool start up sequence has been added too. When the Daytime Running light kicks on, the projectors illuminate in a two-stage sequence before turning back off. A video is worth a thousand words here... so make sure to watch the one embedded in the listing to see that in action! While it does absolutely nothing for performance, you can't deny the cool-factor!DOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical adjusters. US market lights are equipped with amber side markers. Plug-n-Play: Wiring is easy too! The Morimoto F150 LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. Sequential LED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. A separate optic that's dedicated to the turn signal function uses amber LED's to produce a full sequential turn signal. While that feature will cause others to mistake your truck for an Audi; for those who are a bit more traditional they can also be setup to run as solid on\/off style signals too.Well-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These use the same external housing \/ lens from the gen one version, and those have held up like OEM after a few years on the market.OEM Plus: We live, eat, and sleep headlights. While the F150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed. They Look: Amazing. At least in our opinion! The design of the second Gen F150 LED heads was inspired by the OEM LED headlights from the new Ford Expedition. The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered top of the line original equipment to those who don't know any better. The piano black trim and smoked gray diffusers keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets. Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984418562216,"sku":"HEADTAILKIT38","price":2242.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152729.010_276cc883-b3db-4834-a069-ea112d1b2058.jpg?v=1760018071"},{"product_id":"morimoto-18-20-ford-f-150-hybrid-heads-and-red-tails-headtailkit39","title":"18-20 Ford F-150 Hybrid Heads and Red Tails","description":"\u003cp\u003eHeadlights: BANG FOR THE BUCK: When they came out in late 2018, The XB LED headlights from Morimoto set the bar higher than everything else in the aftermarket, and they're still the benchmark by a longshot to this day. But for many enthusiasts looking for the best, the XB's were simply too expensive. With the introduction of the new Hybrid version, there is finally an XB that everybody can afford. Using a combination of both LED \u0026amp; Incandescent bulbs (thus, Hybrid) these offer much of the same amazing features that the originals do for those who want to be XB-ballers on a budget. QUALITY, INSIDE AND OUT: Thanks to sharing many of the same core components developed for the top of the line model, the new Hybrid series headlights from Morimoto are hardly a compromise. They use the same OEM-grade housing. The same optics for the DRL. They offer the same five-year warranty too. The fit and finish on the Morimoto Ford F150 LED headlights is far superior than anything else out there in this price range, guaranteed. PERFORMANCE: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. The XB Hybrid headlights have a powerful, wide, and bright LED low beam projector, and a dedicated LED high beam projector too. Their optics were specially developed just for use the hybrid lineup to produce an amazing beam pattern despite the affordable price point. These are much more than an aesthetic upgrade, they will illuminate the road much more effectively too. DOT APPROVED: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their Dual LED projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly... and that's easy to do with their integrated vertical\/lateral adjusters. PLUG-N-PLAY: Wiring is easy too! Morimoto's Hybrid XB F150 LED headlights are designed to work on your truck without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty. (Note, these will not work on trucks with OEM LED headlights) LED DAYTIME RUNNING LIGHT: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day. The DRL will automatically dim down with the parking lights and low beams for full compliance. The components here are identical to what's in the big-boy version of the XB's and one of the best and most distinguishing features compared to cheaper alternatives out there. WELL-BUILT: If you're going to invest in your truck, do it right the first time. The XB hybrid headlights are built with UV-coated polycarbonate lenses that will resist the test of time, ensuring your truck's new headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. Morimoto's XB LED headlights have proven to hold up quite well after being on the market for quite some time now, which is very confidence inspiring when most cheap headlights start to yellow within six months of installation. Tail Lights: New Ford F-150: While every biz in the aftermarket has a catalog full of products for the 15-20 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!Ultimate Flex: Compatible with the 15-20 Ford F-150, they will fit all trucks with OE halogen, OE halogen with BLIS, OE LED with BLIS, or the Raptor style tail lights. They are not compatible with OE LED trucks without BLIS, however. Even if your truck does not have the BLIS system, the XB tails will still fit, work properly, and add that high-end vibe to your truck. They will not however magically enable the BLIS function. Everything has been thoughtfully designed to be completely plug n play with the factory wiring harness and radar system, use all of the stock mounting points, and should not take more than 30 minutes to install both taillights.Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, there's more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!Style: Inspired by the design of the more modern OEM LED tail lights from the 18-20 F-150, these look right at-home on the rear end of the new F-150. An upper row of horizontal 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for this generation of the F-150!Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984418627752,"sku":"HEADTAILKIT39","price":1619.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152730.010.jpg?v=1760018077"},{"product_id":"morimoto-09-14-f-150-evo-hybrid-heads-and-red-tails-headtailkit4","title":"Morimoto 09-14 F-150 Evo Hybrid Heads and Red Tails","description":"Headlights: Evolutionary:  A simple design refresh would have been easy, but that’s not what this is all about. The all-new XB Evo Hybrid headlights are a showcase of everything Morimoto is made of at a price that everybody can afford. From concept to completion. Packed with features that demonstrate a true attention to detail including the latest in technology, compliance, quality, and styling, these headlights are designed for enthusiasts who are serious about all the above, even if it comes at a premium.  Maximum Performance:  Thanks to an all-new generation of Morimoto Bi-LED projectors, the XB Evo Hybrid headlights will meet \u0026amp; exceed the highest standards for headlight performance that are set by the Insurance Institute for Highway Safety... which is a tough mark even for most modern luxury automakers. Here, the F-150 Evo Hybrid headlight utilizes the same Bi-LED projectors found in the higher end XB Evo model to deliver unmatched light output, with an incredibly bright and wide low beam, and a high beam that destroys darkness. All optics are powered by the latest OE-grade automotive LEDs from Nichia in Japan.  On Road:  The Morimoto XB Evo Hybrid Headlights meet all standards with FVMSS108 regulations for on-road use in the USA. Their projector optics are so capable and efficient that their LEDs are only driven at about 50% of their full potential intensity to avoid exceeding limitations set by compliance. The vertical aim is fully adjustable within +\/- 6 degrees for a perfect alignment on any F-150, even with a lift. The system was designed in California by Morimoto’s lead optical engineer, Yoshi Ishida, to deliver maximum visibility, comfort, and safety, and that it does.  Off Road:  Yes, you read that correctly. Out of the box, XB Evo and XB Evo Hybrid are only producing a fraction of their potential intensity for compliance reasons. Want more light for your off-road adventures? The optional Supercharged Drivers boost both low and high beam intensity by 30-50% -- all without sacrificing reliability or warranty. It also adds the welcome sequence to the DRL and projectors that doesn't normally appear on the Hybrid version of the headlight. While the Supercharged drivers easily enable the XB Evo to outshine every other headlight for the F-150 on the market, we must reiterate that they will result in non-compliant levels of peak beam intensity, and therefore should not be used on public roads.  DRL Optics:  The turn signals and daytime running lights illuminate glass-like 3D optics with special surface textures, which enables maximum intensity from all viewing angles. Easily out-shining low-tech DRL optics found in most every other aftermarket headlight.  DRL and Turn Signals:  The daytime running light illuminates in a crisp clear white color that perfectly matches the LED projectors. Thanks to their impressive optics, the amber turn signals are also incredibly bright, and operate in a solid flashing pattern with an elegant fade-off effect. Sequential turn signals and Amber DRL settings are not available for the Hybrid version of the headlights.  OE Fit \u0026amp; Installation:  The XB Evo Hybrid headlights are expertly crafted to match all OE specifications to ensure perfect fitment and hassle-free installation. They will bolt onto the original mounting points and line up to the surrounding sheet-metal without any massaging, and then plug into the factory wire harness and then work without errors on the dash, nor flickering, flashing, or radio interference. Thoughtfully engineered for a modification-free install. No factory warranties void. No headaches.  Well-Built:  This product is completely designed, engineered \u0026amp; tested in the USA by the Morimoto team to meet the high expectations of our customers. Nichia LEDs from Japan are used throughout. All wiring and connections are OE-grade. When it comes to UV protection, OE Toyota headlights are industry-best, which is why we've formulated a new hard coating that exceeds their 3,000-hour standard for resistance against cracking, fading, and yellowing lenses from UV exposure. The list goes on but as the saying goes: you get what you pay for. XB Evo Hybrid headlights aren't cheap, but they are built to a high standard and should easily last the life of your F-150! We’re proud to stand behind the product with an industry-leading five-year warranty.  Tail Lights: Ford F-150: While every biz in the aftermarket has a catalog full of products for the 09-14 Ford F-150, somehow no brand has yet to deliver a worthy set of tail lights for this truck... until now. The Morimoto XB LED tail lights are the category killer that every F-150 owner has been waiting for!  Reverse Lights: Are often over-looked, but not with the Morimoto XB tail lights for the F-150. While they come standard with powerful LED reverse lights, just wait, theres more! Morimoto's BLBB system allows you to plug n play with the optional LED Backup Boost Bar which mounts to the top of your license plate frame and provides an extra 2,700 lumens of controlled light output in reverse. Yeah, Morimoto customers like to see where they're going in reverse too!  Style: Inspired by the design of the more modern OEM LED tail lights from later generation trucks, these look right at-home on the rear end of the 12th Gen. Two clusters of four 3D Optics are illuminated from the rear with integrated TIR optics, and serve as the brake light and turn signal. The parking light optic around the outer edge of the lights mirrors the OEM LED setup, and is equally impressive in the intensity department day or night. Pair that with the surrounding muscular trim, optional smoked or red outer lens, and we've easily got what is the best-looking set tail lights on the road for the 09-14 F-150s!  Style and Safety: All Morimoto tail lights are designed to comply with all DOT, SAE regulations for rear-facing lamps. We pride ourselves on offering stylish, high-performance and safe products for serious enthusiasts, which is why all new Morimoto products are verified by trusted third party labs for compliance and are backed with an industry-leading five year warranty.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: Traffic Pattern: LHD \/ Right Hand Traffic Only\u003c\/li\u003e\n\u003cli\u003e Output (Standard Drivers): DOT \/ FVMSS108 Compliant (LB2V and UB2)\u003c\/li\u003e\n\u003cli\u003e Output (Supercharged Drivers): +30-50% (Non-Compliant)\u003c\/li\u003e\n\u003cli\u003e Main Optics: 2x Type 1 Ishida Optic Bi-LED (1x Nichia NC4W193F @ 750mA)\u003c\/li\u003e\n\u003cli\u003e Functions: Low Beam, High Beam, Parking Light, Turn Signal, and DRL\u003c\/li\u003e\n\u003cli\u003e Turn Signal Mode: Instant-On \/ Fade-Off\u003c\/li\u003e\n\u003cli\u003e DRL Color: White\u003c\/li\u003e\n\u003cli\u003e DRL\/Signal Optics: Glass-like 3D Optics\u003c\/li\u003e\n\u003cli\u003e Internal Finish: Piano Black w\/ contrasting textures\u003c\/li\u003e\n\u003cli\u003e Side marker: Amber side reflex reflector (DOT compliant)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eHeadlights: XB Evo Hybrid Headlights: Ford F-150 (09-14 \/ Set)\u003c\/li\u003e\n\u003cli\u003eTail Lights: XB LED Tail Lights: Ford F-150 (09-14 \/ Red Lens \/ Set)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFord F-150: 2009-2014 (all trim levels, factory halogen \u0026amp; factory HID\/xenon equipped models)\u003c\/li\u003e\n\u003cli\u003eFord SVT Raptor: 2010-2014\u003c\/li\u003e\n\u003cli\u003eTrim Levels: XL, STX, XLT, FX2, FX4, Lariat, King Ranch, Platinum, SVT Raptor, Limited\u003c\/li\u003e\n\u003cli\u003eSupercharged Drivers: LF2-DRVSC12 (Optional, sold separately)\u003c\/li\u003e\n\u003cli\u003eReplaces Ford Part #: FO2503289, FO2502289, FO2503287, FO2502287, DL3Z13008A, DL3Z13008B, DL3Z13008EB, DL3Z13008EC, FR560B1A12SD6V, DL3Z13008DB, DL3Z13008FB, DL3Z13008BB, DL3Z13008CB\u003c\/li\u003e\n\u003cli\u003eNote: These headlights were developed for compatibility with North American vehicles. Morimoto does not guarantee compatibility on trucks outside of North America.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984418693288,"sku":"HEADTAILKIT4","price":1715.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/152731.010.jpg?v=1759353590"}],"url":"https:\/\/eliteracefab.com\/collections\/complete-lighting-kits.oembed","provider":"eliteracefab.com","version":"1.0","type":"link"}