{"title":"Intake Manifolds, Plenums \u0026 Spacers","description":"\u003cp\u003eMaximize volumetric efficiency, ensure equal airflow distribution to every cylinder, and unlock massive top-end power with high-performance intake manifolds, plenums, and spacers. The intake manifold acts as the central respiratory hub of your engine. Factory cast-iron and composite plastic manifolds are typically engineered for low-cost mass production, featuring narrow, restrictive runners and rough internal surfaces that limit high-RPM breathing and can crack or warp under high boost pressure. Upgrading to a performance manifold fundamentally changes your engine’s power band, delivering increased horsepower, torque, and throttle response for naturally aspirated and forced-induction builds.\u003c\/p\u003e\n\u003cp\u003eWhether you are building a track-dedicated race car with a fabricated sheet metal EFI manifold, converting a classic muscle car with a high-flow carbureted intake manifold, or completing an LS-swap, optimizing your induction hardware is critical. Fine-tune your air path and throttle body mounting with high-volume intake plenums, angled intake elbows, and custom valley covers. To further enhance power, add a thermal phenolic intake spacer to isolate the manifold from radiant engine block heat, lowering intake air temperatures (IATs) and increasing total plenum volume. Explore our comprehensive selection of cast aluminum, sheet metal, composite intake manifolds, and essential mounting components.\u003c\/p\u003e","products":[{"product_id":"greddy-nissan-sr20det-s14-s15-short-runner-intake-plenum-for-stock-throttle-body","title":"GReddy Plenum Intake Manifold Nissan 240sx (SR20DET) 1995-1998","description":"\u003cp id=\"products_description\"\u003eGreddy Plenum Intake Manifold Nissan 240sx (SR20DET) 95-98\u003cbr\u003e\u003cbr\u003eGReddy Intake Plenums are designed to maximize performance in highly tuned engines. The fine cast-aluminum intake manifolds allow for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing GReddy Intake manifold is a must.\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003c\/p\u003e\n\u003cli\u003eShort Runners\u003c\/li\u003e\n\u003cli\u003eFits Larger Throttle Body.\u003c\/li\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e","brand":"GReddy","offers":[{"title":"Default Title","offer_id":36924218278056,"sku":"GRE13522317","price":1116.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/GReddy-Nissan-SR20DET-S14-S15-Short-Runner-14-S15-Short-Runner-Intake-Plenum-for-Stock-Throttle-Body_1__86685.1486718030.jpg?v=1733710886"},{"product_id":"greddy-nissan-sr20det-ps13-short-runner-intake-plenum-for-stock-throttle-body","title":"GReddy Plenum Intake Manifold Nissan 240sx (SR20DET) 1989-1998","description":"\u003cp\u003e\u003cspan\u003eGreddy Plenum Intake Manifold Nissan 240sx (SR20DET) 89-98\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eGReddy Intake Plenums are designed to maximize performance in highly tuned engines. The fine cast-aluminum intake manifolds allow for large volumes of air to get evenly distributed to the cylinders. To achieve the most form larger turbochargers at higher boost levels, a smooth flowing GReddy Intake manifold is a must.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease Note: Fits stock thottle body only. For S13 \u0026amp; S14 SR20DETs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GReddy","offers":[{"title":"Default Title","offer_id":36924218310824,"sku":"GRE13522319","price":1021.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/greddy-gre-13522319-28299125096518.webp?v=1733710892"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-acura-integra-94-01-b18a-b18a1-b18b1","title":"Torque Solution Thermal Intake Manifold Gasket: Acura Integra 94-01 B18a\/B18a1\/B18b1","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Acura Integra 1994 -2001 B18a B18a1 B18b1\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e \u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930210365608,"sku":"TQSTS-IMG-005-1","price":44.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/468b7882dc97fe71a924d80f1818a27f.jpg?v=1604426627"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-mitsubishi-evo-x","title":"Torque Solution Thermal Intake Manifold Gasket: Mitsubishi Evo X","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Mitsubishi EVO X\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930210594984,"sku":"TQSTS-IMG-019","price":44.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/bb77110f804e9762995b4e60c8888881.jpg?v=1604426631"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-acura-tl-04-12","title":"Torque Solution Thermal Intake Manifold Gasket: Acura TL 04-12","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Acura TL 2004-2012\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e \u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA\u003cbr\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930211348648,"sku":"TQSTS-IMG-024-1","price":44.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/ccc619b2a528e1b757a7624bdb37566f.jpg?v=1604426636"},{"product_id":"torque-solution-phenolic-thermal-intake-spacers-3mm-for-subaru-ej-engines","title":"Torque Solution Phenolic Thermal Intake Spacers 3mm for Subaru EJ Engines","description":"\u003cp\u003eTorque Solution Phenolic Thermal Intake Spacers\u003cbr\u003eApplications: 3mm for Subaru EJ Engines\u003cbr\u003e\u003cbr\u003eTorque Solution Phenolic Thermal Intake Spacers for Subaru EJ Engines. Our phenolic spacers are made from CNC'd composite glass epoxy resin for its strength, chemical resistance and thermal properties \/ high heat resistance.\u003cbr\u003e\u003cbr\u003e- CNC'd Composite Glass Epoxy Resin\u003cbr\u003e- Excellent Thermal Properties w\/ High Heat Resistance\u003cbr\u003e- Helps Reduce Intake Manifold Temperature\u003cbr\u003e- 3mm Thick\u003cbr\u003e- Limited Lifetime Warranty\u003cbr\u003e\u003cbr\u003eIncludes:\u003cbr\u003e- 3mm Composite Glass Epoxy Spacer (2)\u003cbr\u003e\u003cbr\u003eFits:\u003cbr\u003e- Subaru WRX 2002-2014\u003cbr\u003e- Subaru WRX STI 2004-2020\u003cbr\u003e- Subaru Legacy GT 2005-2012\u003cbr\u003e- Subaru Forester XT 2004-2013\u003cbr\u003e\u003cbr\u003e**Recommended to be used with new OEM gasket part # 14035AA421. 4 are required to complete install.\u003cbr\u003e\u003cbr\u003e**OEM hardware would be reused during the install.\u003c\/p\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930242216104,"sku":"TQSTS-SU-478-3","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/TS-SU-478-3-2.jpg?v=1604524651"},{"product_id":"torque-solution-8mm-phenolic-thermal-intake-spacer-subaru-ej-engines","title":"Torque Solution 8mm Phenolic Thermal Intake Spacer: Subaru EJ Engines","description":"\u003cbr\u003eTorque Solution Phenolic Thermal Intake Spacers\u003cbr\u003eApplications: 8mm for Subaru EJ Engines\u003cbr\u003e\u003cbr\u003eTorque Solution Phenolic Thermal Intake Spacers for Subaru EJ Engines. Our phenolic spacers are made from CNC'd composite glass epoxy resin for its strength, chemical resistance and thermal properties \/ high heat resistance.\u003cbr\u003e\u003cbr\u003e- CNC'd Composite Glass Epoxy Resin\u003cbr\u003e- Excellent Thermal Properties w\/ High Heat Resistance\u003cbr\u003e- Helps Reduce Intake Manifold Temperature\u003cbr\u003e- 8mm Thick\u003cbr\u003e- Limited Lifetime Warranty\u003cbr\u003e\u003cbr\u003eIncludes:\u003cbr\u003e- 8mm Composite Glass Epoxy Spacer (2)\u003cbr\u003e- M8-1.25 x 100 Zinc Socket Cap Bolt (8) (for use with OEM and TS TGV deletes)\u003cbr\u003e- M8-1.25 x 30 Zinc Socket Cap Bolt (4) (for use with TS TGV deletes only)\u003cbr\u003e- M8 Zinc Flat Washer (8)\u003cbr\u003e\u003cbr\u003eFits:\u003cbr\u003e- Subaru WRX 2002-2014\u003cbr\u003e- Subaru WRX STI 2004-2020\u003cbr\u003e- Subaru Legacy GT 2005-2012\u003cbr\u003e- Subaru Forester XT 2004-2013","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930242248872,"sku":"TQSTS-SU-478-8","price":66.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/TS-SU-478-8-2.jpg?v=1604524652"},{"product_id":"torque-solution-thermal-throttle-body-gasket-mitsubishi-lancer-evolution-7-8-9","title":"Torque Solution Thermal Throttle Body Gasket: Mitsubishi Lancer Evolution 7 \/ 8 \/9","description":"\u003cbr\u003eTorque Solution Thermal Throttle Body Gasket\u003cbr\u003eApplications: Mitsubishi Lancer Evolution 7 \/ 8 \/9\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Throttle Body Gasket use a proprietary gasket material that lowers intake temps by reducing heat transfer. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free. They are also great for oversized throttle body setups.\u003cbr\u003e \u003cbr\u003e- Installs in Minutes\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930258239656,"sku":"TQSTS-TBG-015","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/280a3a04ca9a56a6b61c2d0ea50c0b07.jpg?v=1607690421"},{"product_id":"torque-solution-thermal-throttle-body-gasket-subaru-wrx-2002-2005-2-0t","title":"Torque Solution Thermal Throttle Body Gasket: Subaru WRX 2002-2005 2.0T","description":"\u003cbr\u003eTorque Solution Thermal Throttle Body Gasket\u003cbr\u003eApplications: Subaru WRX 2002-2005 2.0T (Drive By Cable Only)\u003cbr\u003e\u003cbr\u003eTorque Solution Thermal Throttle Body Gasket use a proprietary gasket material that lowers intake temps by reducing heat transfer. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free. They are also great for oversized throttle body setups.\u003cbr\u003e- Installs in Minutes\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930260926632,"sku":"TQSTS-TBG-065","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/4cd503532166b7a815b7d065c8899c2a.jpg?v=1604427178"},{"product_id":"torque-solution-thermal-throttle-body-gasket-subaru-2-5l-drive-by-wire","title":"Torque Solution Thermal Throttle Body Gasket: Subaru 2.5L Drive by Wire","description":"\u003cbr\u003eTorque Solution Thermal Throttle Body Gasket\u003cbr\u003eApplications: Subaru 2.5L Drive by Wire\u003cbr\u003e\u003cbr\u003eTorque Solution Thermal Throttle Body Gasket use a proprietary gasket material that lowers intake temps by reducing heat transfer. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free. They are also great for oversized throttle body setups.\u003cbr\u003e- Installs in Minutes\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA\u003cbr\u003e\u003cbr\u003eFitment:\u003cbr\u003e\u003cbr\u003eSubaru Impreza 2.5i 2.5L 2006-2011\u003cbr\u003eSubaru Impreza 2.5i Premium 2.5L 2010-2011\u003cbr\u003eSubaru Impreza Outback Sport 2.5L 2005-2011\u003cbr\u003eSubaru Impreza RS 2.5L 2005\u003cbr\u003eSubaru Impreza WRX 2.5L 2006-2007\u003cbr\u003eSubaru Impreza WRX Limited 2.5L 2006-2007\u003cbr\u003eSubaru Impreza WRX STI 2.5L 2005-2014\u003cbr\u003eSubaru Impreza WRX STI Limited 2.5L 2007\u003cbr\u003eSubaru Impreza WRX STI Limited 2.5L 2011-2014\u003cbr\u003eSubaru Impreza WRX STI Special Edition 2.5L 2010\u003cbr\u003eSubaru Impreza WRX TR 2.5L 2006-2007\u003cbr\u003eSubaru Baja Turbo 2.5L 2004-2006\u003cbr\u003eSubaru Forester Sports 2.5 X 2.5L 2008\u003cbr\u003eSubaru Forester Sports 2.5 XT 2.5L 2008\u003cbr\u003eSubaru Forester X 2.5L 2005-2010\u003cbr\u003eSubaru Forester X L.L. Bean Edition 2.5L 2006-2008\u003cbr\u003eSubaru Forester X Limited 2.5L 2009-2010\u003cbr\u003eSubaru Forester X Premium 2.5L 2009-2010\u003cbr\u003eSubaru Forester XS 2.5L 2005\u003cbr\u003eSubaru Forester XS L.L. Bean Edition 2.5L 2005\u003cbr\u003eSubaru Forester XT 2.5L 2004-2005\u003cbr\u003eSubaru Forester XT Limited 2.5L 2006-2008\u003cbr\u003eSubaru Forester XT Premium 2.5L 2005","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":36930261024936,"sku":"TQSTS-TBG-066","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/fb9307ce6a5ebd2cd7686cb61690ec43.jpg?v=1604427180"},{"product_id":"blox-racing-thermal-intake-manifold-gasket-for-1994-2001-acura-integra-gs-r-1","title":"THERMAL SHIELD GASKET - HONDA B-SERIES VTEC - P72 Head BXIM-00100 BXIM-00100","description":"\u003cp\u003eTHERMAL SHIELD GASKET - HONDA B-SERIES VTEC - P72 Head\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBLOX Racing high performance replacement intake manifold gaskets are CNC-machined out of high temperature resistant thermal polymer composite plastic and are a direct replacement and reusable product.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unique thermal polymer material helps protect against heat soak and reduces the incoming air temperature before it reaches the cylinder head.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe cooler incoming air directly results in greater efficiency and power. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eMade in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eENGINE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eB-series VTEC - PR3 cylinder head:\u003cbr\u003eB16A\/A2\/A3 + JDM variants\u003cbr\u003eB17A1\u003cbr\u003eB18C5 Type-R + JDM variants\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eB-series VTEC - P72 cylinder head:\u003cbr\u003eB18C1 + JDM variant\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eB-series Non-VTEC\u003cbr\u003eB18A\/B\u003cbr\u003eB20B\/Z\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932821581992,"sku":"BLOBXIM-00100","price":32.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/36_68f6dc96-959a-48cc-a3cb-c527d2496aa7.jpg?v=1750884647"},{"product_id":"blox-racing-thermal-intake-manifold-gasket-for-1990-2001-acura-integra-rs-ls-1997-2001-honda-cr-v-1","title":"THERMAL SHIELD GASKET - HONDA B-SERIES Non-VTEC BXIM-00101 BXIM-00101","description":"\u003cp\u003eTHERMAL SHIELD GASKET - HONDA B-SERIES Non-VTEC\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBLOX Racing high performance replacement intake manifold gaskets are CNC-machined out of high temperature resistant thermal polymer composite plastic and are a direct replacement and reusable product.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unique thermal polymer material helps protect against heat soak and reduces the incoming air temperature before it reaches the cylinder head.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe cooler incoming air directly results in greater efficiency and power. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eMade in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eENGINE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eB-series VTEC - PR3 cylinder head:\u003cbr\u003eB16A\/A2\/A3 + JDM variants\u003cbr\u003eB17A1\u003cbr\u003eB18C5 Type-R + JDM variants\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eB-series VTEC - P72 cylinder head:\u003cbr\u003eB18C1 + JDM variant\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eB-series Non-VTEC\u003cbr\u003eB18A\/B\u003cbr\u003eB20B\/Z\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932821647528,"sku":"BLOBXIM-00101","price":32.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/1022737b-1b16-4ba5-a178-22a2947e15a9-420_grande_cc886b80-5dbc-45db-a924-7332e006dcc2.jpg?v=1750884646"},{"product_id":"blox-racing-thermal-intake-manifold-gasket-88-00-b16-92-93-integra-gsr-97-00-integra-type-r-1","title":"THERMAL SHIELD GASKET - HONDA B-SERIES PR3 - PR3 Head BXIM-00102 BXIM-00102","description":"\u003cp class=\"p1\"\u003eBLOX Racing high performance replacement intake manifold gaskets are CNC-machined out of high temperature resistant thermal polymer composite plastic and are a direct replacement and reusable product.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unique thermal polymer material helps protect against heat soak and reduces the incoming air temperature before it reaches the cylinder head.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe cooler incoming air directly results in greater efficiency and power. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eMade in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eENGINE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eB-series VTEC - PR3 cylinder head:\u003cbr\u003eB16A\/A2\/A3 + JDM variants\u003cbr\u003eB17A1\u003cbr\u003eB18C5 Type-R + JDM variants\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eB-series VTEC - P72 cylinder head:\u003cbr\u003eB18C1 + JDM variant\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eB-series Non-VTEC\u003cbr\u003eB18A\/B\u003cbr\u003eB20B\/Z\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932821778600,"sku":"BLOBXIM-00102","price":32.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/blox-racing-thermal-intake-manifold-gasket-88-00-b16-92-93-integra-gsr-97-00-integra-type-r_1024x_0cdf144d-76de-4ddb-a2f5-00879f50ab9e.jpg?v=1750884645"},{"product_id":"blox-racing-thermal-intake-manifold-gasket-for-1992-2000-honda-civic-crx-del-sol-1","title":"THERMAL SHIELD GASKET - HONDA D-SERIES SOHC VTEC BXIM-00103 BXIM-00103","description":"\u003cp\u003eTHERMAL SHIELD GASKET - HONDA D-SERIES SOHC VTEC\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBLOX Racing high performance replacement intake manifold gaskets are CNC-machined out of high temperature resistant thermal polymer composite plastic and are a direct replacement and reusable product.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unique thermal polymer material helps protect against heat soak and reduces the incoming air temperature before it reaches the cylinder head.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe cooler incoming air directly results in greater efficiency and power. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eMade in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eENGINE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eD-series SOHC VTEC\u003cbr\u003eD16Z6 + JDM variant (D15B)\u003cbr\u003eD16Y8\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eD-series DOHC 1.6L\u003cbr\u003e86-89 D16A1 + JDM DOHC ZC variant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932821844136,"sku":"BLOBXIM-00103","price":32.64,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/41y22NQcKFL._AC_SX355.jpg?v=1750884644"},{"product_id":"blox-racing-thermal-intake-manifold-gasket-for-1992-2001-honda-prelude-1","title":"THERMAL SHIELD GASKET - HONDA H-SERIES VTEC BXIM-00105 BXIM-00105","description":"\u003cp\u003eBLOX Racing Thermal Intake Manifold Gasket for 1992-2001 Honda Prelude\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBLOX Racing high performance replacement intake manifold gaskets are CNC-machined out of high temperature resistant thermal polymer composite plastic and are a direct replacement and reusable product.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unique thermal polymer material helps protect against heat soak and reduces the incoming air temperature before it reaches the cylinder head.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe cooler incoming air directly results in greater efficiency and power. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eMade in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eENGINE \u0026amp; VEHICLE APPLICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eH22A\/A1\/A4 + JDM variants\u003cbr\u003e\u003cem\u003eP13 and PDE cylinder heads\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eJDM H23A VTEC\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eJDM Accord SiR F20B\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e93-96 Prelude Si VTEC\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e97-01 Prelude Base and Type-S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932821942440,"sku":"BLOBXIM-00105","price":32.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/34_a875d47b-b3cc-41a0-b18e-8186a57a6255.jpg?v=1750884643"},{"product_id":"blox-racing-thermal-intake-manifold-gasket-for-2002-2005-honda-civic-ep3-2002-2006-acura-rsx-1","title":"THERMAL SHIELD GASKET - HONDA K-SERIES VTEC - PRB\/PNC\/PNL\/PPA Heads BXIM-00106 BXIM-00106","description":"\u003cp class=\"p1\"\u003eTHERMAL SHIELD GASKET - HONDA K-SERIES VTEC - PRB\/PNC\/PNL\/PPA Heads\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBLOX Racing high performance replacement intake manifold gaskets are CNC-machined out of high temperature resistant thermal polymer composite plastic and are a direct replacement and reusable product.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unique thermal polymer material helps protect against heat soak and reduces the incoming air temperature before it reaches the cylinder head.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe cooler incoming air directly results in greater efficiency and power. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eMade in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eENGINE \u0026amp; VEHICLE APPLICATIONS\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePRB\/PNC\/PNL\/PPA cylinder heads:\u003cbr\u003eK20A\/A2\/A3\/Z1, K24A1\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRBC\/RSP\/RBB\/RAA cylinder heads:\u003cbr\u003eK20Z3, JDM K20A, K24A\/A2\/A4\/A8\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e01-05 JDM Civic Type-R EP3 K20A (PRB)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02-06 RSX Type-S DC5 K20A2\/Z1 (PRB) and JDM RSX Type-R variant K20A (PRB)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e06-11 Civic Si K20Z3 (RBC)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e06-10 JDM Civic Type-R FD2 K20A (RSP)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e04-05 TSX K42A2 and JDM K24A variants (RBB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e03-07 Accord K24A4\/A8 (RAA)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e02-06 CR-V K24A1 (PPA)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932822106280,"sku":"BLOBXIM-00106","price":32.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/38_24835e5b-1751-4b83-a18b-85f59f01b6b1.jpg?v=1750884641"},{"product_id":"blox-racing-thermal-intake-manifold-gasket-for-2003-2005-mitsubishi-evolution-viii-1","title":"THERMAL SHIELD GASKET - MITSUBISHI EVO VIII \/ IX (4G63T) BXIM-00110 BXIM-00110","description":"\u003cp\u003eTHERMAL SHIELD GASKET - MITSUBISHI EVO VIII \/ IX (4G63T)\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBLOX Racing high performance replacement intake manifold gaskets are CNC-machined out of high temperature resistant thermal polymer composite plastic and are a direct replacement and reusable product.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis unique thermal polymer material helps protect against heat soak and reduces the incoming air temperature before it reaches the cylinder head.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe cooler incoming air directly results in greater efficiency and power. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eMade in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eVEHICLE \u0026amp; ENGINE APPLICATION\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eMitsubishi Evolution VIII \/ IX 4G63T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932822270120,"sku":"BLOBXIM-00110","price":32.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/40_06ca4c96-d578-4d15-9150-5ce7976b9453.jpg?v=1750884640"},{"product_id":"blox-racing-tuner-series-66mm-cast-throttle-body-gasket-2","title":"REPLACEMENT TUNER SERIES THROTTLE BODY GASKET - HONDA B\/D\/F\/H-SERIES - 66mm BXIM-00211-GK BXIM-00211-GK","description":"\u003cp\u003eBLOX Racing Tuner Series 66mm Cast Throttle Body Gasket\u003c\/p\u003e\n\u003cp\u003eBLOX Racing offers replacement gaskets for its line of Tuner Series cast aluminum throttle bodies.\u003c\/p\u003e\n\u003cp\u003eAvailable in 66mm, 68mm, 70mm and 74mm.\u003c\/p\u003e\n\u003cp\u003eNote: BLOX Racing cannot guarantee fitment or proper operation on other brands of cast or billet throttle bodies. \u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932822368424,"sku":"BLOBXIM-00211-GK","price":7.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/2_8fcf056f-37c1-4887-ab6b-0bf6d79e248e.jpg?v=1750884639"},{"product_id":"blox-racing-tuner-series-66mm-cast-throttle-body-gasket-3","title":"REPLACEMENT TUNER SERIES THROTTLE BODY GASKET - HONDA B\/D\/F\/H-SERIES - 70mm BXIM-00213-GK BXIM-00213-GK","description":"\u003cp\u003eBLOX Racing Tuner Series 66mm Cast Throttle Body Gasket\u003c\/p\u003e\n\u003cp\u003eBLOX Racing offers replacement gaskets for its line of Tuner Series cast aluminum throttle bodies.\u003c\/p\u003e\n\u003cp\u003eAvailable in 66mm, 68mm, 70mm and 74mm.\u003c\/p\u003e\n\u003cp\u003eNote: BLOX Racing cannot guarantee fitment or proper operation on other brands of cast or billet throttle bodies. \u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932822499496,"sku":"BLOBXIM-00213-GK","price":7.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/2_c53254e7-45dd-4d8f-a9e3-8eec54f85311.jpg?v=1750884636"},{"product_id":"blox-racing-70mm-billet-throttle-body-gasket-for-k-series-1","title":"REPLACEMENT BILLET THROTTLE BODY GASKET 70mm - HONDA K-SERIES BXIM-00215-GK BXIM-00215-GK","description":"\u003cp\u003eBLOX Racing offers replacement gaskets for its line of Billet aluminum throttle bodies.\u003c\/p\u003e\n\u003cp\u003eAvailable in 70mm and 72mm bore sizes.\u003c\/p\u003e\n\u003cp\u003eNote: BLOX Racing cannot guarantee fitment or proper operation on other brands of cast or billet throttle bodies. \u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":36932822565032,"sku":"BLOBXIM-00215-GK","price":7.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/blox.tb-gasket-billet_5000x_cf264a60-17a1-4a57-bd98-03da0ce8f451.jpg?v=1750884635"},{"product_id":"fast-repl-intake-port-seal-lsxr-l","title":"FAST Repl. Intake Port Seal LSXR L","description":"\u003cp\u003eThese gaskets are designed to provide a seal between the LSXR 102mm intake manifold and LS1, LS6 and LS7 cylinder heads.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e","brand":"FAST","offers":[{"title":"Default Title","offer_id":36948031602856,"sku":"FST146203-8","price":51.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/347a76e70e7f3648df39999340665b35.jpg?v=1607698725"},{"product_id":"fast-lsx-manifold-92mm-inlet-black","title":"FAST LSX Manifold 92MM Inlet - 54039B","description":"The patented LSX 92mm Black Intake Manifold from FAST is the only three-piece Gen III (cathedral port) composite manifold proven to deliver increased performance without compromising bottom-end drivability or high RPM power.  For both street and racing applications, the new black intake manifold is an easy bolt-on installation for GM Gen III (LS1, -2, and -6) engines and is designed to work with the FAST Big Mouth 92mm Throttle Body.  The new FAST LSX 92mm Black Intake Manifold maintains the performance gains achieved over stock intake manifolds with no loss in drivability or low RPM torque.  While the new stylish, black intake manifold delivers terrific performance right out of the box, it can be ported by the customer for even more flow.  As requested by previous LSX customers, the intake features the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange and o-ring gasket and threaded insert throttle body mounts that provide increased durability.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2001-2004\u003c\/td\u003e\n\u003ctd\u003eAvanti\u003c\/td\u003e\n\u003ctd\u003eII\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eLaCrosse\u003c\/td\u003e\n\u003ctd\u003eSuper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2007\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRainier\u003c\/td\u003e\n\u003ctd\u003eCXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRainier\u003c\/td\u003e\n\u003ctd\u003eCXL Plus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2005\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003eHybrid Platinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003eBlack Diamond LS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003eBlack Diamond LT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003eBlack Diamond LTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2003\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eNorth Face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2003\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eOn Road Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eWBH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eZ66\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eAvalanche 1500\u003c\/td\u003e\n\u003ctd\u003eZ71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2012\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eColorado\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005,2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 2500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005,2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 2500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 2500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 3500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 3500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 3500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eImpala\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eLCF 3500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2005\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2006,2009-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2006,2010-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2004,2006-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eXFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500\u003c\/td\u003e\n\u003ctd\u003eZ71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2000\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2000\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2000\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eHigh Country\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 2500 HD\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500 HD\u003c\/td\u003e\n\u003ctd\u003eHigh Country\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500 HD\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500 HD\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSilverado 3500 HD\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2004\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSSR\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2001,2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 1500\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 1500\u003c\/td\u003e\n\u003ctd\u003eZ71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 2500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 2500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 3500 HD\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2019\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 3500 HD\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2001,2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003eLTZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003ePPV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2012-2014\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003eZ71\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer EXT\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer EXT\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2004\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTrailblazer EXT\u003c\/td\u003e\n\u003ctd\u003eNorth Face\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2012\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCanyon\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2009\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy\u003c\/td\u003e\n\u003ctd\u003eDenali\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy XL\u003c\/td\u003e\n\u003ctd\u003eDenali\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy XL\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy XL\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy XUV\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eEnvoy XUV\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 1500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 1500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 1500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005,2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 2500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 2500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 2500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 2500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 3500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 3500\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 3500\u003c\/td\u003e\n\u003ctd\u003eLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2005\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2006,2009-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2003,2006,2010-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2002-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500\u003c\/td\u003e\n\u003ctd\u003eXFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2007\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 1500 Classic\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2000\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2000\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1999-2000\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500 HD\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500 HD\u003c\/td\u003e\n\u003ctd\u003eDenali\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500 HD\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500 HD\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 2500 HD\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 3500 HD\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 3500 HD\u003c\/td\u003e\n\u003ctd\u003eDenali\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 3500 HD\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2019\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 3500 HD\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSierra 3500 HD\u003c\/td\u003e\n\u003ctd\u003eWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003eDenali Hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003eHybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003eSL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2000-2014\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 1500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 2500\u003c\/td\u003e\n\u003ctd\u003eSLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon XL 2500\u003c\/td\u003e\n\u003ctd\u003eSLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2004,2007\u003c\/td\u003e\n\u003ctd\u003eHummer\u003c\/td\u003e\n\u003ctd\u003eH2\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2010\u003c\/td\u003e\n\u003ctd\u003eHummer\u003c\/td\u003e\n\u003ctd\u003eH3\u003c\/td\u003e\n\u003ctd\u003eAlpha\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003eHummer\u003c\/td\u003e\n\u003ctd\u003eH3\u003c\/td\u003e\n\u003ctd\u003eChampionship Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009-2010\u003c\/td\u003e\n\u003ctd\u003eHummer\u003c\/td\u003e\n\u003ctd\u003eH3T\u003c\/td\u003e\n\u003ctd\u003eAlpha\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003\u003c\/td\u003e\n\u003ctd\u003eIsuzu\u003c\/td\u003e\n\u003ctd\u003eAscender\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2005\u003c\/td\u003e\n\u003ctd\u003eIsuzu\u003c\/td\u003e\n\u003ctd\u003eAscender\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2003-2006\u003c\/td\u003e\n\u003ctd\u003eIsuzu\u003c\/td\u003e\n\u003ctd\u003eAscender\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eIsuzu\u003c\/td\u003e\n\u003ctd\u003eAscender\u003c\/td\u003e\n\u003ctd\u003eS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005-2008\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2009\u003c\/td\u003e\n\u003ctd\u003eSaab\u003c\/td\u003e\n\u003ctd\u003e9-7x\u003c\/td\u003e\n\u003ctd\u003e5.3i\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005\u003c\/td\u003e\n\u003ctd\u003eSaab\u003c\/td\u003e\n\u003ctd\u003e9-7x\u003c\/td\u003e\n\u003ctd\u003eArc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"FAST","offers":[{"title":"Default Title","offer_id":36948036255912,"sku":"FST54039B","price":1245.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/55da2a65c9164664e3d3cbd38a4e637b.jpg?v=1604544035"},{"product_id":"sinister-diesel-03-07-dodge-cummins-intake-elbow","title":"Sinister Diesel Intake Elbow for 2003-2007 Dodge Cummins 5.9L","description":"\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully Tig-Welded mandrel-bent tubing, with precision CNC machined billet aluminum flanges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExpertly designed interior contours allow for smoother, unrestricted airflow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBoosts turbo response and overall engine performance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved Throttle Reponses and Turbo Spool-up\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy and quick installation with basic hand tools.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGreat for Daily Driving or Towing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003chr data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eIntroducing the Sinister Diesel Intake Elbow for the 2003-2007 Dodge Cummins 5.9L. This premium aftermarket upgrade replaces the stock intake elbow, offering significantly better airflow, enhances turbo response, and improved engine efficiency.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003eManufactured from high-strength aluminum to withstand high pressures and temperatures. Features a corrosion-resistant, polished finish for enhanced durability and aesthetic appeal. Our elbow is rigorously tested to meet or exceed all industry standards, backed by Sinister Diesel's long-standing reputation for quality and durability. \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eKit Includes:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlue Powder Coated Aluminum Intake Elbow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequired Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"Installing Sinister Diesel's 5 9L CUMMINS INTAKE ELBOW\" src=\"https:\/\/www.youtube.com\/embed\/puh9AGyy0ok\" height=\"300\" width=\"500\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Sinister Diesel","offers":[{"title":"Default Title","offer_id":36956515074216,"sku":"SINSD-INTEL-5.9-03","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/f5db8138582bd6d34c8f1f9495a207e6.jpg?v=1700591600"},{"product_id":"sinister-diesel-11-15-chevy-duramax-lml-intake-bridge","title":"Sinister Diesel Intake Bridge for 2011-2016 GM Duramax 6.6L LML","description":"\u003cp\u003e\u003cstrong\u003eNOT FOR SALE IN THE STATE OF CALIFORNIA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sinister Diesel LML Intake Bridge replaces the restrictive stock piping on your 2011 - 2016 GM 6.6L Duramax Diesel with larger diameter CNC mandrel bent aluminum tubing that optimizes airflow after the throttle valve and heater. The increased diameter of the air path and large radius bends help decrease restriction within the intake for a noticeable increase in performance and turbo spool. \u003c\/p\u003e\n\u003cp\u003eFinished within eye-catching Sinister's high-gloss blue powder coat, the Sinister Diesel LML Duramax cold air intake bridge provides an upgrade over the stock cast aluminum. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision Mandrel Bent 6061 Aluminum Tubing for a Perfect Fit\u003c\/li\u003e\n\u003cli\u003eFully TIG-Welded with Precision CNC Machined Billet Aluminum Flanges\u003c\/li\u003e\n\u003cli\u003eIncreased Horsepower and Torque\u003c\/li\u003e\n\u003cli\u003e2 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Sinister Diesel Intake Bridge for GM LML Powdercoated in Sinister Blue\u003c\/li\u003e\n\u003cli\u003e(1) Sinister Diesel Blue Anodized Aluminum Resonator Block-Off Plate\u003c\/li\u003e\n\u003cli\u003eRequired Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSpecial Note:  Retains Factory Smog Equipment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eQ: What kind of finish is on this part?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA:\u003c\/strong\u003eThis product is finished in a Sinister Blue high gloss powder coat on the bridge pipe and a blue anodized finish on the resonator block-off plate for extra protection and a clean and stylish appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Sinister Diesel","offers":[{"title":"Default Title","offer_id":36956515205288,"sku":"SINSD-INTEL-LML","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/0ff0a696a52d541f822cb6334efde8f6.jpg?v=1604625248"},{"product_id":"edelbrock-manifold-and-carb-kit-performer-eps-small-block-chevrolet-1957-1986-natural-finish","title":"Edelbrock Single-Quad Manifold and Carb Kit for 1957-1986 Small-Block Chevy - 2021","description":"\u003cp\u003eEdelbrock Single-Quad Manifold and carb kit for 1957-86 Small-Block Chevy. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Edelbrock #2021 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it's easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a single box. These kits include: an Edelbrock manifold, Performer or Thunder Series AVS carb, chrome fuel inlet, intake gasket set, intake bolt set and carb stud kit. The manifold and carbs are available with a standard satin finish or with our bright EnduraShine chrome-like finish for long lasting show quality looks.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd data-th=\"Manufacturer\" class=\"col data\"\u003eEdelbrock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eBase Plate Gasket Mount Hole Quantity\u003c\/th\u003e\n\u003ctd data-th=\"Base Plate Gasket Mount Hole Quantity\" class=\"col data\"\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eApplication\u003c\/th\u003e\n\u003ctd data-th=\"Application\" class=\"col data\"\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eUPC\u003c\/th\u003e\n\u003ctd data-th=\"UPC\" class=\"col data\"\u003e00085347020218\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eBase Plate Gasket Mount Hole Quantity\u003c\/th\u003e\n\u003ctd data-th=\"Base Plate Gasket Mount Hole Quantity\" class=\"col data\"\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eSeries\u003c\/th\u003e\n\u003ctd data-th=\"Series\" class=\"col data\"\u003ePerformer EPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eBase Plate Material\u003c\/th\u003e\n\u003ctd data-th=\"Base Plate Material\" class=\"col data\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eBase Plate Gasket Thickness\u003c\/th\u003e\n\u003ctd data-th=\"Base Plate Gasket Thickness\" class=\"col data\"\u003e0.048 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eAvailability Note\u003c\/th\u003e\n\u003ctd data-th=\"Availability Note\" class=\"col data\"\u003eAvailable to Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eWarranty\u003c\/th\u003e\n\u003ctd data-th=\"Warranty\" class=\"col data\"\u003e12 Months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eCarburetor Type\u003c\/th\u003e\n\u003ctd data-th=\"Carburetor Type\" class=\"col data\"\u003eAVS2 Series 650 cfm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eEmissions Code\u003c\/th\u003e\n\u003ctd data-th=\"Emissions Code\" class=\"col data\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eHazardous Materials Warning\u003c\/th\u003e\n\u003ctd data-th=\"Hazardous Materials Warning\" class=\"col data\"\u003e\n\u003cimg src=\"https:\/\/www.edelbrock.com\/pub\/static\/frontend\/GC\/Edelbrock\/en_US\/img\/hazardous_warning.png\"\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eInstallation Notes\u003c\/th\u003e\n\u003ctd data-th=\"Installation Notes\" class=\"col data\"\u003e\n\u003cul\u003e\n\u003cli\u003eComes with a Performer EPS manifold \u0026amp; AVS2 650 cfm carb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eFinish\u003c\/th\u003e\n\u003ctd data-th=\"Finish\" class=\"col data\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eSingle Or Dual Plane Type\u003c\/th\u003e\n\u003ctd data-th=\"Single Or Dual Plane Type\" class=\"col data\"\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":36971648614568,"sku":"EDE2021","price":763.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/10_db66a13f-494d-4443-a6e6-4ad100ebe93a.jpg?v=1711466207"},{"product_id":"edelbrock-manifold-installation-kit-performer-eps-sbc-1957-1986-natural-finish","title":"Edelbrock Edelbrock Chevrolet SB Performer EPS Manifold w\/ Gaskets, Bolts, Studs - 2040","description":"\u003cp\u003eEdelbrock Manifold Installation kit PN 2040 includes all the necessary components to replace your existing intake: PN 2701 Performer EPS intake manifold, intake gasket set, carburetor base gasket, RTV sealant, intake bolts \u0026amp; carb studs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSPECS\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd data-th=\"Manufacturer\" class=\"col data\"\u003eEdelbrock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eApplication\u003c\/th\u003e\n\u003ctd data-th=\"Application\" class=\"col data\"\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eUPC\u003c\/th\u003e\n\u003ctd data-th=\"UPC\" class=\"col data\"\u003e00085347020409\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eVehicle Model\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Model\" class=\"col data\"\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eSeries\u003c\/th\u003e\n\u003ctd data-th=\"Series\" class=\"col data\"\u003ePerformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eGasket Or Seal Included\u003c\/th\u003e\n\u003ctd data-th=\"Gasket Or Seal Included\" class=\"col data\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eQuantity\u003c\/th\u003e\n\u003ctd data-th=\"Quantity\" class=\"col data\"\u003eKit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eAvailability Note\u003c\/th\u003e\n\u003ctd data-th=\"Availability Note\" class=\"col data\"\u003eAvailable to Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eWarranty\u003c\/th\u003e\n\u003ctd data-th=\"Warranty\" class=\"col data\"\u003e12 Months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eEc Basic Operating Rpm Range\u003c\/th\u003e\n\u003ctd data-th=\"Ec Basic Operating Rpm Range\" class=\"col data\"\u003eIdle-5500 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eMounting Hole Quantity\u003c\/th\u003e\n\u003ctd data-th=\"Mounting Hole Quantity\" class=\"col data\"\u003e(Carb Bolt) 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eMounting Hole Diameter\u003c\/th\u003e\n\u003ctd data-th=\"Mounting Hole Diameter\" class=\"col data\"\u003e(Carb Bolt) 5\/16-18 UNC in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eAngle\u003c\/th\u003e\n\u003ctd data-th=\"Angle\" class=\"col data\"\u003e(Carb) 3 deg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eEmissions Code\u003c\/th\u003e\n\u003ctd data-th=\"Emissions Code\" class=\"col data\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eHazardous Materials Warning\u003c\/th\u003e\n\u003ctd data-th=\"Hazardous Materials Warning\" class=\"col data\"\u003e\n\u003cimg src=\"https:\/\/www.edelbrock.com\/pub\/static\/frontend\/GC\/Edelbrock\/en_US\/img\/hazardous_warning.png\"\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eInstallation Notes\u003c\/th\u003e\n\u003ctd data-th=\"Installation Notes\" class=\"col data\"\u003e\n\u003cul\u003e\n\u003cli\u003eManifold ht: A-3.74\", B-4.80\"; Carb pad height: 4.27\"; Port exit dimensions: 1.15\" x 1.87\".; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT\/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eFinish\u003c\/th\u003e\n\u003ctd data-th=\"Finish\" class=\"col data\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eMaterial\u003c\/th\u003e\n\u003ctd data-th=\"Material\" class=\"col data\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eRear Maximum Height\u003c\/th\u003e\n\u003ctd data-th=\"Rear Maximum Height\" class=\"col data\"\u003e(B) (Measured To Engine Block) 4.80 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eSingle Or Dual Plane Type\u003c\/th\u003e\n\u003ctd data-th=\"Single Or Dual Plane Type\" class=\"col data\"\u003eDual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":36971651072168,"sku":"EDE2040","price":316.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/002040_v1.jpg?v=1733818301"},{"product_id":"edelbrock-sbc-performer-eps-manifold","title":"Edelbrock Performer EPS Intake Manifold For 1955-1986 Small-Block Chevy - 2701","description":"\u003cp\u003eEdelbrock Performer EPS Intake Manifold for 1955-86 262-400 Small-Block Chevrolet V8, Accepts a 4150-Style Square-Bore Carburetor. Non-EGR.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock part #2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that's \"tuned\" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/www.edelbrock.com\/mwdownloads\/download\/link\/id\/77270\" rel=\"77270 noopener\" title=\"PDF-Installation Instructions\" target=\"_blank\"\u003e\u003cb\u003ePDF-Installation Instructions\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Manufacturer\"\u003eEdelbrock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eApplication\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Application\"\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eUPC\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"UPC\"\u003e00085347027019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eSeries\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Series\"\u003ePerformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eGrade Type\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Grade Type\"\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eGasket Or Seal Included\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Gasket Or Seal Included\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eVehicle Model\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vehicle Model\"\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eAvailability Note\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Availability Note\"\u003eAvailable to Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Warranty\"\u003e12 Months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eEc Basic Operating Rpm Range\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Ec Basic Operating Rpm Range\"\u003eIdle-5500 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eEmissions Code\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Emissions Code\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eHazardous Materials Warning\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Hazardous Materials Warning\"\u003e\n\u003cimg src=\"https:\/\/www.edelbrock.com\/pub\/static\/frontend\/GC\/Edelbrock\/en_US\/img\/hazardous_warning.png\"\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eInstallation Notes\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Installation Notes\"\u003e\n\u003cul\u003e\n\u003cli\u003eManifold ht: A-3.74\", B-4.80\"; Carb pad height: 4.27\"; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15\" x 1.87\".; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT\/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eColor\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Color\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eFinish\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Finish\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Material\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eRear Maximum Height\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Rear Maximum Height\"\u003e4.800 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col head\" scope=\"row\"\u003eSingle Or Dual Plane Type\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Single Or Dual Plane Type\"\u003eDual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":36971663098024,"sku":"EDE2701","price":245.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/15_30a4c3ac-ad57-424e-8397-dc2ce7581767.jpg?v=1733818322"},{"product_id":"edelbrock-honda-b16a-type-r-race-manifold","title":"Edelbrock Victor X Honda B16A \u0026 B18C5 Intake Manifold - 4764","description":"\u003cp data-mce-fragment=\"1\"\u003eEdelbrock Victor X B16A \u0026amp; B18C5 Intake Manifold Honda\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEdelbrock part #4764 Victor X intake manifold is designed for B16A \u0026amp; Type R B18C5 engines. This intake manifold is optimized for maximum power from 7,000 to 10,000 RPM, the Victor X manifold is designed for turbo and all-motor applications. Engineered for high performance, this manifold has four additional bosses for nitrous or added fuel injectors.\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003ca title=\"PDF-Installation Instructions\" rel=\"76245 noopener\" href=\"https:\/\/www.edelbrock.com\/mwdownloads\/download\/link\/id\/76245\" style=\"color: #2b00ff;\" target=\"_blank\"\u003ePDF-Installation Instructions\u003c\/a\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSPECS\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\" style=\"height: 533px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd data-th=\"Manufacturer\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003eEdelbrock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eApplication\u003c\/th\u003e\n\u003ctd data-th=\"Application\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eUPC\u003c\/th\u003e\n\u003ctd data-th=\"UPC\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003e00085347047642\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eSeries\u003c\/th\u003e\n\u003ctd data-th=\"Series\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003eVictor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 39px; width: 114.68px;\"\u003eGasket Or Seal Included\u003c\/th\u003e\n\u003ctd data-th=\"Gasket Or Seal Included\" class=\"col data\" style=\"height: 39px; width: 406.383px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eVehicle Model\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Model\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003eHonda\/Acura\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eAvailability Note\u003c\/th\u003e\n\u003ctd data-th=\"Availability Note\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003eAvailable to Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eWarranty\u003c\/th\u003e\n\u003ctd data-th=\"Warranty\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003e12 Months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 58px; width: 114.68px;\"\u003eEc Basic Operating Rpm Range\u003c\/th\u003e\n\u003ctd data-th=\"Ec Basic Operating Rpm Range\" class=\"col data\" style=\"height: 58px; width: 406.383px;\"\u003e7000-10000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eEmissions Code\u003c\/th\u003e\n\u003ctd data-th=\"Emissions Code\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003e\n\u003cdiv class=\"eo-title-box red\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 101px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 101px; width: 114.68px;\"\u003eHazardous Materials Warning\u003c\/th\u003e\n\u003ctd data-th=\"Hazardous Materials Warning\" class=\"col data\" style=\"height: 101px; width: 406.383px;\"\u003e\n\u003cimg src=\"https:\/\/www.edelbrock.com\/pub\/static\/frontend\/GC\/Edelbrock\/en_US\/img\/hazardous_warning.png\"\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 86px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 86px; width: 114.68px;\"\u003eInstallation Notes\u003c\/th\u003e\n\u003ctd data-th=\"Installation Notes\" class=\"col data\" style=\"height: 86px; width: 406.383px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended Edelbrock intake gasket: #15043 1994-2000 B18B motors, #15042 1994-2000 B18C1 motors, #15041 1994-2000 B16 \/ B18C5 motors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 19px; width: 114.68px;\"\u003eMaterial\u003c\/th\u003e\n\u003ctd data-th=\"Material\" class=\"col data\" style=\"height: 19px; width: 406.383px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 39px; width: 114.68px;\"\u003eRear Maximum Height\u003c\/th\u003e\n\u003ctd data-th=\"Rear Maximum Height\" class=\"col data\" style=\"height: 39px; width: 406.383px;\"\u003e12.500 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"height: 39px; width: 114.68px;\"\u003eSingle Or Dual Plane Type\u003c\/th\u003e\n\u003ctd data-th=\"Single Or Dual Plane Type\" class=\"col data\" style=\"height: 39px; width: 406.383px;\"\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":36971680759976,"sku":"EDE4764","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/004764_v1_3.jpg?v=1711397508"},{"product_id":"edelbrock-s-b-chevy-rpm-air-gap-manifold","title":"Edelbrock Performer RPM Small Block Chevy Air-Gap Intake Manifold - 7501","description":"\u003cp\u003eEdelbrock Performer RPM AIR-GAP Intake Manifold For Chevrolet 262-400 Small-Block V8\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock part #7501 RPM Air-Gap #7501 intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8 applications. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 class=\"this-title title-specs\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"PDF-Installation Instructions\" rel=\"75748 noopener\" href=\"https:\/\/www.edelbrock.com\/mwdownloads\/download\/link\/id\/75748\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e\u003cb\u003ePDF-Installation Instructions\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd data-th=\"Manufacturer\" class=\"col data\"\u003eEdelbrock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eApplication\u003c\/th\u003e\n\u003ctd data-th=\"Application\" class=\"col data\"\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eUPC\u003c\/th\u003e\n\u003ctd data-th=\"UPC\" class=\"col data\"\u003e00085347075010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eSeries\u003c\/th\u003e\n\u003ctd data-th=\"Series\" class=\"col data\"\u003eRPM Air-Gap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eGrade Type\u003c\/th\u003e\n\u003ctd data-th=\"Grade Type\" class=\"col data\"\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eGasket Or Seal Included\u003c\/th\u003e\n\u003ctd data-th=\"Gasket Or Seal Included\" class=\"col data\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eVehicle Model\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Model\" class=\"col data\"\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eAvailability Note\u003c\/th\u003e\n\u003ctd data-th=\"Availability Note\" class=\"col data\"\u003eAvailable to Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eWarranty\u003c\/th\u003e\n\u003ctd data-th=\"Warranty\" class=\"col data\"\u003e12 Months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eEc Basic Operating Rpm Range\u003c\/th\u003e\n\u003ctd data-th=\"Ec Basic Operating Rpm Range\" class=\"col data\"\u003e1500-6500 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eEmissions Code\u003c\/th\u003e\n\u003ctd data-th=\"Emissions Code\" class=\"col data\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.edelbrock.com\/emissions-guide\/\" id=\"emissionsExternalLink\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eHazardous Materials Warning\u003c\/th\u003e\n\u003ctd data-th=\"Hazardous Materials Warning\" class=\"col data\"\u003e\n\u003cimg src=\"https:\/\/www.edelbrock.com\/pub\/static\/frontend\/GC\/Edelbrock\/en_US\/img\/hazardous_warning.png\"\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eInstallation Notes\u003c\/th\u003e\n\u003ctd data-th=\"Installation Notes\" class=\"col data\"\u003e\n\u003cul\u003e\n\u003cli\u003eManifold ht: A-4.20\", B-5.25\" (.70\" taller than #2101); Carb pad height: 4.27\"; Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket #8031 or #8036 for 1972-78.; Port exit dimensions: 1.14\" x 1.95\"; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Use #8504 Edelbrock bolt kit; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT\/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eFinish\u003c\/th\u003e\n\u003ctd data-th=\"Finish\" class=\"col data\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eMaterial\u003c\/th\u003e\n\u003ctd data-th=\"Material\" class=\"col data\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eRear Maximum Height\u003c\/th\u003e\n\u003ctd data-th=\"Rear Maximum Height\" class=\"col data\"\u003e5.250 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\"\u003eSingle Or Dual Plane Type\u003c\/th\u003e\n\u003ctd data-th=\"Single Or Dual Plane Type\" class=\"col data\"\u003eDual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":36971702255784,"sku":"EDE7501","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/12_3c21cd15-0922-4770-8bc7-49a38824b837.jpg?v=1711399649"},{"product_id":"fast-lsxr-manifold-102mm-rect-port-black","title":"FAST LSXR Manifold 102MM Rect Port 146102B","description":"\u003cp\u003eConstructed from the same advanced polymer material as the original FAST LSX 92mm Intake Manifold, but now in the popular black color, the LSXR offers a host of benefits over aluminum aftermarket intakes, including lighter weight, increased strength and improved heat dissipating characteristics.\u003c\/p\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003eGrand Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2017\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008-2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2009\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eG8\u003c\/td\u003e\n\u003ctd\u003eGXP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FAST","offers":[{"title":"Default Title","offer_id":36973677314216,"sku":"FST146102B","price":1259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/5d090d523af6728e5e8bff67a0e3f5c9_8f71afb3-0f99-429d-a3ab-ea91dedc0b97.jpg?v=1604733277"},{"product_id":"sinister-diesel-99-5-03-ford-7-3l-powerstroke-intake-elbow","title":"Sinister Diesel Intake Elbow with Boots for 1999.5-2003 Ford Powerstroke 7.3L","description":"\u003cp\u003e\u003cspan\u003eFeatures:\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum Construction\u003c\/li\u003e\n\u003cli\u003eFully TIG-welded mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined billet aluminum flanges\u003c\/li\u003e\n\u003cli\u003eDirect fitment to OEM locations\u003c\/li\u003e\n\u003cli\u003e2 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003chr\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eUpgrade your 99.5-03' Ford Powerstroke 7.3L with the Sinister Diesel Intake Elbow and Boots. Designed to maximize airflow and improve throttle response, this intake elbow kit is specifically engineered for the 7.3L Powerstroke engine, offering enhanced power, increased fuel efficiency, and a noticeable improvement in overall performance.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eConstructed with precision and built to withstand the demands of heavy-duty applications, the Sinister Diesel Intake Elbow is crafted using high-quality materials. Its robust design ensures durability and long-lasting performance, even in the most challenging conditions. By improving airflow and reducing restrictions over the factory unit, the Sinister Diesel Intake Elbow increases horsepower and torque output, resulting in improved acceleration and towing capabilities. \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eSinister Blue Powder Coated Aluminum Intake Elbow\u003c\/li\u003e\n\u003cli\u003eSinister Diesel 7.3 Silicone Boot Kit\u003c\/li\u003e\n\u003cli\u003eAll hardware necessary for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003ciframe title=\"7 3 intake manifold\" src=\"https:\/\/www.youtube.com\/embed\/DpBevyzxAQE\" height=\"300\" width=\"500\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"Sinister Diesel","offers":[{"title":"Default Title","offer_id":36985694486696,"sku":"SINSD-INTEL-7.3-BK","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/3d76819ad9b3cadd4d5712e0db63a81e.jpg?v=1604836684"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-mitsubishi-evo-7-8-9","title":"Torque Solution Thermal Intake Manifold Gasket: Mitsubishi Evo 7\/8\/9","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Mitsubishi EVO 7 \/ 8 \/ 9\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37133999177896,"sku":"TQSTS-IMG-014","price":44.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/31214cace5943023673a7bbe680b2307.jpg?v=1628208148"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-hyundai-genesis-2-0t-10","title":"Torque Solution Thermal Intake Manifold Gasket: Hyundai Genesis 2.0T 10+","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Hyundai Genesis 2.0T 2010-2012\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA\u003cbr\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37133999505576,"sku":"TQSTS-IMG-015","price":44.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/6db85c608d2f0838c18cff61470a5f9b.jpg?v=1605949362"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-nissan-r35-gt-r-09-14","title":"Torque Solution Thermal Intake Manifold Gasket: Nissan R35 GT-R 09-14","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Nissan R35 GT-R 2009-2014\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e \u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37133999898792,"sku":"TQSTS-IMG-023","price":44.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/83450efab72b59090e4324a0b31d0e9c.jpg?v=1605949365"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-subaru-wrx-02-08","title":"Torque Solution Thermal Intake Manifold Gasket: Subaru WRX 02-08","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Subaru WRX 2002-2014\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37134000357544,"sku":"TQSTS-IMG-030-1","price":44.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/eb727fb7bda2e385900e4bf42fce0828.jpg?v=1605949369"},{"product_id":"torque-solution-thermal-throttle-body-gasket-hyundai-genesis-2-0-turbo-10-12","title":"Torque Solution Thermal Throttle Body Gasket: Hyundai Genesis 2.0 Turbo 10-12","description":"\u003cbr data-mce-fragment=\"1\"\u003eTorque Solution Thermal Throttle Body Gasket\u003cbr data-mce-fragment=\"1\"\u003eApplications: Hyundai Genesis 2.0 Turbo 2010-2012\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eTorque Solution Thermal Throttle Body Gasket use a proprietary gasket material that lowers intake temps by reducing heat transfer. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free. They are also great for oversized throttle body setups.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e- Installs in Minutes\u003cbr data-mce-fragment=\"1\"\u003e- Dramatically Reduces Inlet Temps\u003cbr data-mce-fragment=\"1\"\u003e- Increases Horsepower\u003cbr data-mce-fragment=\"1\"\u003e- Precision Cut for Superior Fitment\u003cbr data-mce-fragment=\"1\"\u003e- Street \u0026amp; Track Torture Tested\u003cbr data-mce-fragment=\"1\"\u003e- Made in the USA\u003cbr\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37134002028712,"sku":"TQSTS-TBG-068","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/efd3ee4807c5c9328d980d39fbbcb1dd.jpg?v=1605949383"},{"product_id":"torque-solution-thermal-throttle-body-gasket-hyundai-genesis-v6-2013","title":"Torque Solution Thermal Throttle Body Gasket: Hyundai Genesis V6 2013+","description":"Torque Solution Thermal Throttle Body Gasket\u003cbr\u003eApplications: Hyundai Genesis V6 2013+\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Throttle Body Gasket use a proprietary gasket material that lowers intake temps by reducing heat transfer. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free. They are also great for oversized throttle body setups.\u003cbr\u003e \u003cbr\u003e- Installs in Minutes\u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37134005239976,"sku":"TQSTS-TBG-070","price":25.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/d70f6bcb11435085e9f429c5c2956ef1.jpg?v=1605949388"},{"product_id":"greddy-89-02-r32-r33-r34-rb26dett-single-throttle-surge-tank-kit","title":"GReddy Single Throttle Surge Tank Kit Nissan Skyline GT-R R32 | R33 | R34 1989-2002","description":"\u003cp id=\"products_description\"\u003eGReddy Intake Plenums are designed to maximize performance in highly tuned engines. The single throttle body surge tank conversion for the (R32 \/ R33 \/ R34) RB26 puts an emphasis on a balance of high power and mid-range torque. The kit features a large 90mm throttle-body and a 4.1L surge tank, that is 121% larger then the OEM piece. For extra rigidity during high boost applications, it uses thick 3mm formed metal tank that is welded to a precision machined, grooved base plate, with six individual, internal velocity-stacks. Between each connection are carefully designed and manufactured sealing rings. The CNC machined primary runners are sized for optimal efficiency. The kit comes anodized to provide a durable, scratch and rust resistant finish.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCollector Surge Tank Size is 4.1l\u003c\/li\u003e\n\u003cli\u003eSurge tank, base plate come pre-welded\u003c\/li\u003e\n\u003cli\u003eTuned internal velocity stacks on each runner for increased efficiency\u003c\/li\u003e\n\u003cli\u003eCNC machined inlet runners\u003c\/li\u003e\n\u003cli\u003eSpecially designed and manufactured O-ring style gasket provide superior sealing for each runner\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM AAC valve and TPS throttle position sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline GT-R R32 | R33 | R34 89-02\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e","brand":"GReddy","offers":[{"title":"Default Title","offer_id":37334428156072,"sku":"GRE13522307","price":2185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/GReddy_Single_Throttle_Surge_Tank_Kit_89-02_Nissan_Skyline_R32_R33_R34_RB26DETT.jpg?v=1613492254"},{"product_id":"blox-racing-performance-intake-manifold-for-1994-2001-acura-integra-gs-r","title":"POWER INTAKE MANIFOLD V3 - B-SERIES VTEC (B18C1) BXIM-10100-V3 BXIM-10100-V3","description":"\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003eThe BLOX Racing Power Intake Manifold features a larger plenum and longer runners which significantly increases the engine’s incoming airflow and volume compared to the factory and some other aftermarket units.  Each intake manifold has been balanced, pressure tested and tuned to create more usable horsepower across a wider RPM range.\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003eThe BLOX Racing Version 3 intake manifolds feature a pre-drilled plenum that accommodates the Blox surface-mount vacuum block without the need of drilling or other modifications. \u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003eThe BLOX Racing surface-mount vacuum provides an easy and clean installation when additional sources of vacuum are required.\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003eSurface-mount block is sold separately.\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor maximum results, use with a BLOX Racing cast or billet throttle body, air filter and velocity stack.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e64mm throttle body opening can be port-matched up to 74mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVehicle \u0026amp; Engine Applications\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFitment is for Honda\/Acura P72 B-series VTEC cylinder head\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e94-01 Acura Integra GS-R (B18C1) + JDM variant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":37383938343080,"sku":"BLOBXIM-10100-V3","price":203.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/18_3f3a58ed-3e42-44b6-a35c-bcff3df7f2f2.jpg?v=1750884499"},{"product_id":"blox-racing-performance-intake-manifold-for-1990-2001-acura-integra-rs-ls-1997-2001-honda-cr-v","title":"POWER INTAKE MANIFOLD V3 - B-SERIES NON-VTEC BXIM-10200-V3 BXIM-10200-V3","description":"\u003cp class=\"p1\"\u003eThe BLOX Racing Power Intake Manifold features a larger plenum and longer runners which significantly increases the engine’s incoming airflow and volume compared to the factory and some other aftermarket units.  Each intake manifold has been balanced, pressure tested and tuned to create more usable horsepower across a wider RPM range.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe BLOX Racing Version 3 intake manifolds feature a pre-drilled plenum that accommodates the Blox surface-mount vacuum block without the need of drilling or other modifications. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe BLOX Racing surface-mount vacuum provides an easy and clean installation when additional sources of vacuum are required.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSurface-mount block is sold separately.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eFor maximum results, use with a BLOX Racing cast or billet throttle body, air filter and velocity stack.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003e64mm throttle body opening can be port-matched up to 74mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eVehicle \u0026amp; Engine Applications\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFitment is for Honda B-series NON-VTEC cylinder heads\u003c\/li\u003e\n\u003cli\u003e90-93 Integra (B18A1)\u003c\/li\u003e\n\u003cli\u003e94-01 Integra (B18B)\u003c\/li\u003e\n\u003cli\u003e97-01 CR-V (B20B) + JDM variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":37383938408616,"sku":"BLOBXIM-10200-V3","price":203.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/18_a73e2f06-83a0-4dd1-9d29-5ec5b681f800.jpg?v=1750884493"},{"product_id":"blox-racing-performance-intake-manifold-88-00-honda-b16-92-93-integra-gsr","title":"POWER INTAKE MANIFOLD V3 - B-SERIES VTEC (B16A\/B18C5) BXIM-20100-V3 BXIM-20100-V3","description":"\u003cp class=\"p1\"\u003eThe BLOX Racing Power Intake Manifold features a larger plenum and longer runners which significantly increases the engine’s incoming airflow and volume compared to the factory and some other aftermarket units.  Each intake manifold has been balanced, pressure tested and tuned to create more usable horsepower across a wider RPM range.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe BLOX Racing Version 3 intake manifolds feature a pre-drilled plenum that accommodates the Blox surface-mount vacuum block without the need of drilling or other modifications. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe BLOX Racing surface-mount vacuum provides an easy and clean installation when additional sources of vacuum are required.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSurface-mount block is sold separately.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eFor maximum results, use with a BLOX Racing cast or billet throttle body, air filter and velocity stack.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003e64mm throttle body opening can be port-matched up to 74mm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eVehicle \u0026amp; Engine Applications\u003c\/strong\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFitment is for Honda PR3 B-series VTEC head\u003c\/li\u003e\n\u003cli\u003e94-97 Delsol Si VTEC (B16A2) + JDM B16A variants\u003c\/li\u003e\n\u003cli\u003e99-00 Civic Si (B16A3) + JDM variants\u003c\/li\u003e\n\u003cli\u003e92-93 Integra GS-R (B17A1)\u003c\/li\u003e\n\u003cli\u003e97-01 Integra Type-R (B18C5) + JDM variants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BLOX Racing","offers":[{"title":"Default Title","offer_id":37383938769064,"sku":"BLOBXIM-20100-V3","price":203.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/1_b8920766-530d-4338-8966-74792cf6c83d.jpg?v=1750884490"},{"product_id":"sinister-diesel-98-5-02-dodge-5-9l-intake-elbow","title":"Sinister Diesel Intake Elbow for 1998.5-2002 Dodge Cummins 5.9L","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e50 State Legal!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCARB EO# D-721-7\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe Sinister Diesel intake elbow for the 5.9L Cummins replaces the restrictive stock piping on your for the 1998.5-2002 Dodge Truck with larger diameter CNC mandrel bent aluminum tubing. The increased diameter and large radius bend prevent restriction within the intake for a noticeable increase in performance and turbo spool while the stronger aluminum tubing and CNC machined base plate is designed to hold higher boost levels. Finished with in eye-catching Sinister's high-gloss blue powder coat, the Sinister Diesel 5.9L Cummins Intake Elbow provides an upgrade over the stock unit.\u003cbr data-mce-fragment=\"1\"\u003eLike all Sinister Diesel products, it was designed and pressure tested at our California headquarters and comes backed by the legendary Sinister Diesel .\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrecision Mandrel Bent 6061 Aluminum Tubing for a Perfect Fit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully TIG-welded mandrel-bent tubing, with precision CNC machined billet aluminum flanges\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 Year Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlue Powder Coated Aluminum Intake Elbow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRequired Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFAQ's\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eQ: What kind of finish is on this part?\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eA:\u003c\/strong\u003eThis product is finished in a Sinister Blue high gloss powder coat for extra protection and a clean and stylish appearance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sinister Diesel","offers":[{"title":"Default Title","offer_id":37393843126440,"sku":"SINSD-INTEL-5.9-98","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/DSC7578_786x524_edd18780-73c4-47fa-93a3-89a64381a72f.jpg?v=1733879628"},{"product_id":"greddy-jza80-2jz-gte-in-custom-application-pro-surge-tank-kit-welding-required","title":"GReddy Pro Surge Tank Kit Toyota 2JZ-GTE","description":"\u003cp id=\"products_description\"\u003eDesigned specifically for custom applications with 2JZ engine transplants, the GReddy 2JZ Pro Surge Tank Kit offers the versatility to best match the throttle-body inlet angle and vacuum\/air ports for your engine bay. This Pro kit includes 4.0l tank capacity with a large 90mm throttle-body, and top feed fuel rail, and necessary weld-on flanges. For additional rigidity during high boost applications, it uses thick 3mm formed metal tank that is welded to a precision machined, grooved base, with six individual, internal velocity-stacks. Also pre-welded are the tuned primary runners and intake manifold flange with fuel injector ports. Another key feature is the unique, purpose-built fuel-resist, ring-type gaskets that seal the manifold to the head.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurge Tank\u003c\/li\u003e\n\u003cli\u003eThrottle Body\u003c\/li\u003e\n\u003cli\u003eThrottle Flange\u003c\/li\u003e\n\u003cli\u003eFuel Delivery Tube \u0026amp; Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eCollector tank capacity 4.02 l (normal ratio 200%)\u003c\/li\u003e\n\u003cli\u003eSurge tank, base plate and runners pre-welded\u003c\/li\u003e\n\u003cli\u003eWelding required to attach throttle body flange, throttle cable mount and air port flanges\u003c\/li\u003e\n\u003cli\u003eTuned internal velocity stacks on each runner\u003c\/li\u003e\n\u003cli\u003ePrimary runner length 130?, OD 14.0mm ID 13.0mm\u003c\/li\u003e\n\u003cli\u003eSpecially designed and manufactured O-ring style gasket provide superior manifold to head sealing for each runner\u003c\/li\u003e\n\u003cli\u003eThrottle-body hose diameter 100mm, internal butterfly diameter 90mm with low-profile throttle shaft\u003c\/li\u003e\n\u003cli\u003eFuel Delivery tube for 14mm top feed injector (compatible with Nissan R35 VR38DETT factory injectors)\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM factory Idler Control Valve and TPS Throttle Position Sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e","brand":"GReddy","offers":[{"title":"Default Title","offer_id":37411193454760,"sku":"GRE13512303","price":2113.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/GReddy_JZA80_2JZ-GTE_In_Custom_Application_PRO_Surge_Tank_Kit.png?v=1627809899"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-acura-integra-gs-r-94-01-b18c1","title":"Torque Solution Thermal Intake Manifold Gasket: Acura Integra GS-R 94-01 B18c1","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Acura Integra GS-R 1994-2001 B18c1\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e \u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37453884031144,"sku":"TQSTS-IMG-001","price":44.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/a627fa1ee4c4f3837a36593ca766172c.jpg?v=1608491459"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-acura-rsx-type-s-02-05-k20","title":"Torque Solution Thermal Intake Manifold Gasket: Acura RSX\/Type S 02-05 K20","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Acura RSX \u0026amp; Type-S 2002-2005 K20\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e \u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37453884391592,"sku":"TQSTS-IMG-002-1","price":44.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/1860ddb9e7ae2ca809f955eebc273717.jpg?v=1608491462"},{"product_id":"torque-solution-thermal-intake-manifold-gasket-nissan-240sx-91-98-ka24-2-4l","title":"Torque Solution Thermal Intake Manifold Gasket: Nissan 240SX 91-98 KA24 2.4L","description":"\u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets\u003cbr\u003eApplications: Nissan 240sx 1991-1998 KA24 2.4L\u003cbr\u003e \u003cbr\u003eTorque Solution Thermal Intake Manifold Gaskets use a proprietary gasket material that lowers intake temps by reducing heat transfer from the head to the intake manifold. These gaskets can be used to replace factory gaskets and are guaranteed to be leak free and are reusable. Great for all motor and forced induction applications.\u003cbr\u003e \u003cbr\u003e- Dramatically Reduces Inlet Temps\u003cbr\u003e- Increases Horsepower\u003cbr\u003e- Precision Cut for Superior Fitment\u003cbr\u003e- Street \u0026amp; Track Torture Tested\u003cbr\u003e- Made in the USA","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":37453884817576,"sku":"TQSTS-IMG-022-4","price":44.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/fe67b8cffb30f4285fb07522ca82a155.jpg?v=1608491465"},{"product_id":"fast-replacement-inner-seal-for-ls","title":"FAST Replacement Inner Seal For LS","description":"\u003cp\u003eThis intake manifold gasket ensures a proper seal between the upper and lower shells on our 102mm LSXR and LSXRT intake manifolds.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e","brand":"FAST","offers":[{"title":"Default Title","offer_id":37469021143208,"sku":"FST146005","price":20.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/3735515edd62968ce70764017419e4cd.jpg?v=1608599513"},{"product_id":"fast-lsxr-manifold-102mm-ls7-car-black","title":"FAST LSXR Manifold 102MM LS7 Car - Black","description":"\u003cp\u003eConstructed from the same advanced polymer material as the original FAST LSX 92mm Intake Manifold, but now in the popular black color, the LSXR offers a host of benefits over aluminum aftermarket intakes, including lighter weight, increased strength and improved heat dissipating characteristics.\u003c\/p\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2014-2015\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ\/28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e427\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003e427 Limited Edition Z06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2006-2013\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003eZ06\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCorvette\u003c\/td\u003e\n\u003ctd\u003eZ06 Carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FAST","offers":[{"title":"Default Title","offer_id":37469029662888,"sku":"FST146202B","price":1329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/products\/5d090d523af6728e5e8bff67a0e3f5c9_ef5d01b3-b8a8-4683-ad5a-309e1ef7c4fb.jpg?v=1608572129"},{"product_id":"edelbrock-victor-jr-ford-efi-for-4-6l-engines-manifold-only","title":"Edelbrock Victor Jr Ford 4.6L Modular Intake Manifold EFI - 28385","description":"\u003cp\u003eEdelbrock EFI Victor Jr Ford 4.6L Modular Intake Manifold\u003cb data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock part #28385 Victor Jr. Ford 4.6L SOHC EFI intake manifold is designed for Ford 4.6L SOHC Modular engines, 1999-2004 SOHC Modular 4.6L engine is designed for 4.6l Ford's using EFI in racing. Timing control module available separately. Not intended for or as a stock replacement intake manifold. Whether you're building a daily driver, ultra high-performance's street machine or race car, an Edelbrock intake manifold will provide the power right where you want it. The Edelbrock Victor Jr. Ford 4.6L SOHC also features a natural aluminum finish for a classic look. For the ultimate \"Made in USA\" quality, every Edelbrock intake manifold is cast and machined in the USA.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eNOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003ca style=\"color: #2b00ff;\" href=\"https:\/\/www.edelbrock.com\/mwdownloads\/download\/link\/id\/75733\" rel=\"75733 noopener\" title=\"PDF-Installation Instructions\" target=\"_blank\"\u003ePDF-Installation Instructions\u003c\/a\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb data-mce-fragment=\"1\"\u003eSPECS\u003c\/b\u003e\u003c\/p\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\" style=\"height: 729px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Manufacturer\" style=\"height: 19px; width: 420.703px;\"\u003eEdelbrock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eApplication\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Application\" style=\"height: 19px; width: 420.703px;\"\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eUPC\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"UPC\" style=\"height: 19px; width: 420.703px;\"\u003e00085347283859\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eSeries\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Series\" style=\"height: 19px; width: 420.703px;\"\u003eVictor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eGrade Type\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Grade Type\" style=\"height: 19px; width: 420.703px;\"\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 39px; width: 100.359px;\"\u003eGasket Or Seal Included\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Gasket Or Seal Included\" style=\"height: 39px; width: 420.703px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eVehicle Model\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Vehicle Model\" style=\"height: 19px; width: 420.703px;\"\u003eFord\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 39px; width: 100.359px;\"\u003eAvailability Note\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Availability Note\" style=\"height: 39px; width: 420.703px;\"\u003eAvailable to Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Warranty\" style=\"height: 19px; width: 420.703px;\"\u003e12 Months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 58px; width: 100.359px;\"\u003eEc Basic Operating Rpm Range\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Ec Basic Operating Rpm Range\" style=\"height: 58px; width: 420.703px;\"\u003e3500-7500 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 39px; width: 100.359px;\"\u003eEmissions Code\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Emissions Code\" style=\"height: 39px; width: 420.703px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 101px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 101px; width: 100.359px;\"\u003eHazardous Materials Warning\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Hazardous Materials Warning\" style=\"height: 101px; width: 420.703px;\"\u003e\n\u003cimg src=\"https:\/\/www.edelbrock.com\/pub\/static\/frontend\/GC\/Edelbrock\/en_US\/img\/hazardous_warning.png\"\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 204px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 204px; width: 100.359px;\"\u003eInstallation Notes\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Installation Notes\" style=\"height: 204px; width: 420.703px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended fuel rail: Edelbrock #3639; Recommended intake gasket: OEM factory gaskets; Throttle body recommendations: Edelbrock #38783 4150 style 4V; or #3848 competition EFI elbow and #3818 90mm throttle body.; Manifold height: A-4.75\", B-4.75\", 0 Deg carb angle; Port exit dimensions: 1.42\" x 1.72\"; Throttle pad and plenum optimized for square-bore (4150 style) 4V throttle bodies.; Built in water crossover with clearance for the stock 1999-2004 alternator location.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eFinish\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Finish\" style=\"height: 19px; width: 420.703px;\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 19px; width: 100.359px;\"\u003eMaterial\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Material\" style=\"height: 19px; width: 420.703px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 39px; width: 100.359px;\"\u003eRear Maximum Height\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Rear Maximum Height\" style=\"height: 39px; width: 420.703px;\"\u003e4.750 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39px;\"\u003e\n\u003cth class=\"col head\" scope=\"row\" style=\"height: 39px; width: 100.359px;\"\u003eSingle Or Dual Plane Type\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Single Or Dual Plane Type\" style=\"height: 39px; width: 420.703px;\"\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":37520670884008,"sku":"EDE28385","price":529.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/2_af28e83f-60d0-4fc1-9be5-6f70d0b54b55.jpg?v=1733890509"},{"product_id":"edelbrock-ls1-carburedted-manifold-only","title":"Edelbrock Victor Jr. Small Block Chevy Ls1 Carbureted Intake Manifold Only - 29087","description":"\u003cp\u003eEdelbrock Victor Jr. LS1 Carbureted Intake Manifold Only For Chevrolet LS Gen III\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock part #29087 Victor Jr. LS1 intake manifold is a high-rise single-plane intake capable of supporting up to 600 hp. The Victor Jr. LS1 features a flange that accepts a square-bore carburetors. It can be used on LS2 applications when matched with MSD's #6012 LS2 ignition controller (available through MSD Performance). Includes a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"PDF-Installation Instructions\" rel=\"76817 noopener\" href=\"https:\/\/www.edelbrock.com\/mwdownloads\/download\/link\/id\/76817\" style=\"color: #2b00ff;\" target=\"_blank\"\u003e\u003cb\u003ePDF-Installation Instructions\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd data-th=\"Manufacturer\" class=\"col data\" style=\"width: 438.398px;\"\u003eEdelbrock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eApplication\u003c\/th\u003e\n\u003ctd data-th=\"Application\" class=\"col data\" style=\"width: 438.398px;\"\u003eApplication Specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eUPC\u003c\/th\u003e\n\u003ctd data-th=\"UPC\" class=\"col data\" style=\"width: 438.398px;\"\u003e00085347290871\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eSeries\u003c\/th\u003e\n\u003ctd data-th=\"Series\" class=\"col data\" style=\"width: 438.398px;\"\u003eVictor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eGrade Type\u003c\/th\u003e\n\u003ctd data-th=\"Grade Type\" class=\"col data\" style=\"width: 438.398px;\"\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eGasket Or Seal Included\u003c\/th\u003e\n\u003ctd data-th=\"Gasket Or Seal Included\" class=\"col data\" style=\"width: 438.398px;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eVehicle Model\u003c\/th\u003e\n\u003ctd data-th=\"Vehicle Model\" class=\"col data\" style=\"width: 438.398px;\"\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eAvailability Note\u003c\/th\u003e\n\u003ctd data-th=\"Availability Note\" class=\"col data\" style=\"width: 438.398px;\"\u003eAvailable to Order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eWarranty\u003c\/th\u003e\n\u003ctd data-th=\"Warranty\" class=\"col data\" style=\"width: 438.398px;\"\u003e12 Months\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eEc Basic Operating Rpm Range\u003c\/th\u003e\n\u003ctd data-th=\"Ec Basic Operating Rpm Range\" class=\"col data\" style=\"width: 438.398px;\"\u003e3500-7500 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eEmissions Code\u003c\/th\u003e\n\u003ctd data-th=\"Emissions Code\" class=\"col data\" style=\"width: 438.398px;\"\u003e\n\u003ca rel=\"noopener\" href=\"https:\/\/www.edelbrock.com\/emissions-guide\/\" id=\"emissionsExternalLink\" target=\"_blank\"\u003e \u003c\/a\u003e\n\u003cdiv class=\"eo-title-box red\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eHazardous Materials Warning\u003c\/th\u003e\n\u003ctd data-th=\"Hazardous Materials Warning\" class=\"col data\" style=\"width: 438.398px;\"\u003e\n\u003cimg src=\"https:\/\/www.edelbrock.com\/pub\/static\/frontend\/GC\/Edelbrock\/en_US\/img\/hazardous_warning.png\"\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eInstallation Notes\u003c\/th\u003e\n\u003ctd data-th=\"Installation Notes\" class=\"col data\" style=\"width: 438.398px;\"\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended intake gasket: LS1\/LS6 style individual port o-ring seals or Edelbrock #7386; Carb Flange height: 4.95\"; Port exit dimensions: .98\"x 2.74\"; For the heights of all Edelbrock manifolds, please visit the Manifold Reference Dimensions page. http:\/\/www.edelbrock.com\/automotive\/mc\/manifolds\/reference-dimensions.shtml; Edelbrock LS1 Timing Control Module #91238 works on LS1 24x reluctor wheel (crank trigger) applications only; LS2 applications with 58x reluctor (crank trigger) requires MSD #6012 ignition controller. Please contact MSD tech for details (915) 857-5200 or www.msdperformance.com. LS1 (24x) applications can be recognized by the rear mounted cam (A) LS1 Timing Control Module #91238 works on LS1 24x reluctor wheel (crank trigger) applications only; LS1 (24x) applications can be recognized by the rear mounted cam position sensor which is black in color, while LS2 (58x) cam sensor is mounted in the timing cover and is gray in color.; Crankshaft sleeve #HP3795 and Flexplate #HP4004 is recommended when using a TH350, TH400 or 700R4 on a LS1; these items are available through Hughes Performance 800-274-RACE; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT\/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread.; Carburetor size (CFM) should be selected based on your specific engine combination.; To ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eFinish\u003c\/th\u003e\n\u003ctd data-th=\"Finish\" class=\"col data\" style=\"width: 438.398px;\"\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eMaterial\u003c\/th\u003e\n\u003ctd data-th=\"Material\" class=\"col data\" style=\"width: 438.398px;\"\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eRear Maximum Height\u003c\/th\u003e\n\u003ctd data-th=\"Rear Maximum Height\" class=\"col data\" style=\"width: 438.398px;\"\u003e4.950 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\" class=\"col head\" style=\"width: 90.0469px;\"\u003eSingle Or Dual Plane Type\u003c\/th\u003e\n\u003ctd data-th=\"Single Or Dual Plane Type\" class=\"col data\" style=\"width: 438.398px;\"\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":37520678027432,"sku":"EDE29087","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/5_9d486c15-70c1-41c9-8930-d8ee7c8148b0.jpg?v=1733890516"}],"url":"https:\/\/eliteracefab.com\/collections\/intake-manifolds-plenums-spacers.oembed","provider":"eliteracefab.com","version":"1.0","type":"link"}