{"title":"Light Converters \u0026 Adapters","description":"\u003cp\u003eThe light may fit the opening, but the factory connection does not always match the new component. These lighting converters and adapters bridge compatible factory and aftermarket systems with bulb-socket adapters, ballast adapters, input converters and LED driver components. Find application-specific solutions from AlphaRex, Morimoto and other lighting specialists.\u003c\/p\u003e","products":[{"product_id":"morimoto-switched-power-harness-2-or-4banger-bar-6-8-pods-each-baf130h","title":"Morimoto Switched Power Harness: 2 or 4Banger Bar (6-8 Pods \/ Each)","description":"\u003cp\u003ePower Up: The Morimoto BangerBar is a piece of equipment designed to set a new standard in in its segment, and the same goes for the wiring. This harness is designed to provide reliable power delivery to a row of our 2 or 4Banger pods linked together with ease. OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Triple sealed proprietary 4-pin relays with hanger. Proprietary over-molded inline fuse holder with 20A mini fuse. DT06-2S female outputs with dual seals. Stainless steel power and ground terminals. Proprietary M-Spec push button switch with amber-LED backlight.  Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery. Every line of the 16 awg copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Your factory wire harness will fall apart before this thing. Plug n Play: The connections on the harness have been laid out in a logical way to power up to eight Bangers linked together with the BangerBar links. The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall. The harness also includes an input line that's ideal for use with upfitter switches. Compatible: This harness is a perfect match for Morimoto BangerBar setups with numerous pods linked together as a light bar. It is purposely designed to deliver enough power, and laid out with intention. There are two versions. One for 6-8 pods, and another for 10-12 pods.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982918181032,"sku":"BAF130H","price":126.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/103598.010.jpg?v=1759773271"},{"product_id":"morimoto-switched-power-harness-2-or-4banger-bar-10-12-pods-each-baf131h","title":"Morimoto 2Banger\/4Banger Wiring Harness for LED Pods 10-12 Lights - BAF131H","description":"\u003cp data-start=\"1009\" data-end=\"1036\"\u003e\u003cstrong data-start=\"1009\" data-end=\"1034\"\u003eKey Features \u0026amp; Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1039\" data-end=\"1065\"\u003e\n\u003cstrong data-start=\"1039\" data-end=\"1055\"\u003ePart Number:\u003c\/strong\u003e BAF131H\u003c\/li\u003e\n\u003cli data-start=\"1068\" data-end=\"1112\"\u003e\n\u003cstrong data-start=\"1068\" data-end=\"1085\"\u003eProduct Type:\u003c\/strong\u003e LED Light Wiring Harness\u003c\/li\u003e\n\u003cli data-start=\"1115\" data-end=\"1160\"\u003e\n\u003cstrong data-start=\"1115\" data-end=\"1128\"\u003eCapacity:\u003c\/strong\u003e Supports 10-12 LED pod lights\u003c\/li\u003e\n\u003cli data-start=\"1163\" data-end=\"1240\"\u003e\n\u003cstrong data-start=\"1163\" data-end=\"1181\"\u003eCompatibility:\u003c\/strong\u003e Designed for Morimoto 1Banger, 2Banger, and 4Banger pods\u003c\/li\u003e\n\u003cli data-start=\"1243\" data-end=\"1319\"\u003e\n\u003cstrong data-start=\"1243\" data-end=\"1261\"\u003eUniversal Fit:\u003c\/strong\u003e Works with other pods using Deutsch DT 2-pin connectors\u003c\/li\u003e\n\u003cli data-start=\"1322\" data-end=\"1378\"\u003e\n\u003cstrong data-start=\"1322\" data-end=\"1333\"\u003eRelays:\u003c\/strong\u003e 2x 60A M-Spec (hard-potted for durability)\u003c\/li\u003e\n\u003cli data-start=\"1381\" data-end=\"1429\"\u003e\n\u003cstrong data-start=\"1381\" data-end=\"1394\"\u003eSwitches:\u003c\/strong\u003e 2x switches with amber backlight\u003c\/li\u003e\n\u003cli data-start=\"1432\" data-end=\"1485\"\u003e\n\u003cstrong data-start=\"1432\" data-end=\"1444\"\u003eOutputs:\u003c\/strong\u003e 12x Deutsch DT 2-pin female connectors\u003c\/li\u003e\n\u003cli data-start=\"1488\" data-end=\"1559\"\u003e\n\u003cstrong data-start=\"1488\" data-end=\"1509\"\u003eMain Power Input:\u003c\/strong\u003e 12V battery ring terminals (8.5mm ID \/ 15mm OD)\u003c\/li\u003e\n\u003cli data-start=\"1562\" data-end=\"1614\"\u003e\n\u003cstrong data-start=\"1562\" data-end=\"1579\"\u003eWiring Gauge:\u003c\/strong\u003e 10AWG–20AWG copper stranded wire\u003c\/li\u003e\n\u003cli data-start=\"1617\" data-end=\"1663\"\u003e\n\u003cstrong data-start=\"1617\" data-end=\"1632\"\u003eInsulation:\u003c\/strong\u003e Black Tech Flex braided mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1665\" data-end=\"1679\"\u003e\u003cstrong data-start=\"1665\" data-end=\"1677\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1682\" data-end=\"1713\"\u003eMorimoto 1Banger LED Pods\u003c\/li\u003e\n\u003cli data-start=\"1716\" data-end=\"1747\"\u003eMorimoto 2Banger LED Pods\u003c\/li\u003e\n\u003cli data-start=\"1750\" data-end=\"1781\"\u003eMorimoto 4Banger LED Pods\u003c\/li\u003e\n\u003cli data-start=\"1784\" data-end=\"1833\"\u003eOther LED Pods with Deutsch DT 2-Pin Inputs\u003c\/li\u003e\n\u003cli data-start=\"1836\" data-end=\"1873\"\u003eSupports 10-12 Pod Light Setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower and control your off-road lighting setup with the Morimoto BAF131H wiring harness, designed specifically for 2Banger and 4Banger LED pod systems. Engineered for reliability and high performance, this harness supports 10-12 lights and features dual 60A M-Spec relays for consistent power delivery. With 12 Deutsch DT 2-pin outputs, it offers broad compatibility with Morimoto pods and other lights using the same connector type. The included dual switches with amber backlighting provide easy control, while the heavy-duty copper wiring and Tech Flex braided insulation ensure durability in demanding environments.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982918803624,"sku":"BAF131H","price":144.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/morimoto-baf131h-wiring-harness-10-12-led-pods-deutsch-dt.avif?v=1773973750"},{"product_id":"morimoto-switched-power-harness-bigbanger-2x-pods-each-baf132h","title":"Morimoto Switched Power Harness: BigBanger (2x Pods \/ Each)","description":"\u003cp\u003ePower Up: The Morimoto BigBanger LED Pods have been developed from the ground up to set a new standard in their segment, and the same goes for the wiring. This harness is designed to control the pods and their dual intensity backlight with ease. OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Triple sealed proprietary 4-pin relay with hanger. Proprietary over-molded inline fuse holder with 20A mini fuse. DT06-4S female outputs with dual seals. Stainless steel power and ground terminals. Proprietary M-Spec push button switch with amber-LED backlight.  Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery. Every line of the 16 awg copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Your factory wire harness will fall apart before this thing. Plug n Play: The connections on the harness have been laid out in a logical way to power a BigBanger LED pod on each side of your vehicle. There are two deutsch outputs. A positive battery terminal, a ground terminal, and a switch. The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall. The harness also includes an input line that's ideal for use with upfitter switches. DRL Drive: The harness is designed to send power to the BigBanger backlight using an ignition-switched power source in your fuse box. To do so, the harness includes both a mini and micro fuse tap to ensure success regardless of your make\/model. This will make the backlight run at full intensity. In order to dim the backlight for dusk or night time driving, the harness has a separate line that should be tapped into your parking light or low beam circuit.  Compatible: This harness is a perfect match for the Morimoto BigBanger LED pods. It is purposely designed to deliver enough power, and control the dual intensity backlight. While it may work with other 4-pin LED pods on the market, we have not designed it to be universal.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982919458984,"sku":"BAF132H","price":169.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/103610.010.jpg?v=1759773287"},{"product_id":"morimoto-switched-power-harness-bigbanger-bar-up-to-7x-pods-each-baf133h","title":"Morimoto Switched Power Harness: BigBanger Bar (Up to 7x Pods \/ Each)","description":"\u003cp\u003ePower Up: The Morimoto BigBanger Bar is a piece of equipment designed to set a new standard in in its segment, and the same goes for the wiring. This harness is designed to control a series of BigBanger pods and their dual intensity backlight with ease. OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Triple sealed proprietary 4-pin relay with hanger. Proprietary over-molded inline fuse holder with 20A mini fuse. DT06-4S female outputs with dual seals. Stainless steel power and ground terminals. Proprietary M-Spec push button switch with amber-LED backlight. Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery. Every line of the 16 awg copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Your factory wire harness will fall apart before this thing. Plug n Play: The connections on the harness have been laid out in a logical way to power up to seven BigBangers linked together with the BangerBar links. The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall. The harness also includes an input line that's ideal for use with upfitter switches. DRL Drive: The harness is designed to send power to the BigBanger backlight using an ignition-switched power source in your fuse box. To do so, the harness includes both a mini and micro fuse tap to ensure success regardless of your make\/model. This will make the backlight run at full intensity. In order to dim the backlight for dusk or night time driving, the harness has a separate line that should be tapped into your parking light or low beam circuit.  Compatible: This harness is a perfect match for Morimoto BigBanger LED pods linked together as a light bar. It is purposely designed to deliver enough power, and control the dual intensity backlight. While it may work with other 4-pin LED pods on the market, it is not designed it to be universal.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982919524520,"sku":"BAF133H","price":126.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/103604.010.jpg?v=1759773295"},{"product_id":"morimoto-2p-dt-extension-harness-1-2-4banger-2m-each-baf134h","title":"Morimoto 2P DT Extension Harness: (1\/2\/4Banger \/ 2m \/ Each)","description":"\u003cp\u003eExtension: This harness is designed to provide extra length to the outputs on any of the Morimoto off-road LED pod relay harnesses. They are available in either a two-pin version for the 1,2, or 4Banger, or a four-pin version for the BigBanger. DT Standard: They are compatible with all products designed around DT (Deutsch) connections. Alternatively, you can cut the input connection off and use it as a power pigtail for your own custom wiring. OEM+: Not one component on the harness was overlooked for the sake of pinching pennies. These extensions are durable, meeting the same quality standards as the harnesses and pods they are designed to work with.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982920081576,"sku":"BAF134H","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/100777.010.jpg?v=1759773298"},{"product_id":"morimoto-2p-dt-pigtail-harness-1-2-4banger-6in-each-baf135h","title":"Morimoto 2P DT Pigtail Harness: (1\/2\/4Banger \/ 6in \/ Each)","description":"\u003cp\u003eExtension: This harness is designed to provide extra length to the outputs on any of the Morimoto off-road LED pod relay harnesses. They are available in either a two-pin version for the 1,2, or 4Banger, or a four-pin version for the BigBanger. DT Standard: They are compatible with all products designed around DT (Deutsch) connections. Alternatively, you can cut the input connection off and use it as a power pigtail for your own custom wiring. OEM+: Not one component on the harness was overlooked for the sake of pinching pennies. These extensions are durable, meeting the same quality standards as the harnesses and pods they are designed to work with.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982920147112,"sku":"BAF135H","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/100778.010.jpg?v=1759773301"},{"product_id":"morimoto-deutsch-dt-4-pin-pigtail-6in-each-baf136h","title":"Deutsch DT 4-Pin Pigtail: (6in \/ Each)","description":"\u003cp\u003eExtension: This harness is designed to provide extra length to the outputs on any of the Morimoto off-road LED pod relay harnesses. They are available in either a two-pin version for the 1,2, or 4Banger, or a four-pin version for the BigBanger. DT Standard: They are compatible with all products designed around DT (Deutsch) connections. Alternatively, you can cut the input connection off and use it as a power pigtail for your own custom wiring. OEM+: Not one component on the harness was overlooked for the sake of pinching pennies. These extensions are durable, meeting the same quality standards as the harnesses and pods they are designed to work with.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982920212648,"sku":"BAF136H","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/100779.010.jpg?v=1759773304"},{"product_id":"morimoto-xbt-controller-switched-harness-led153h-2","title":"Morimoto XBT Controller Switched Harness","description":"\u003cp\u003ePower Up! The perfect power harness for your Morimoto RGB Rock Lights, Halos, or other accessories! This harness provides a turn-key solution that delivers switched 12V to the Morimoto XBT Bluetooth controller without risking a drained battery or lights that are always on. If you are running Morimoto rock lights or other color changing accessories powered by the XBT Controller, it's a must have! Build Quality: You don't compromise on the lights you choose for your build, so why compromise when it comes to power delivery? These harnesses are made to OEM specs. They feature 16AWG wiring, that's protected by high quality techflex mesh insulation, a high quality fuse tap, and an aluminum push-button mechanism. All in all, a quality piece at a bargain compared to what you would pay sourcing the same materials and building it at home. Fuse Box Seal: Since the input is designed to go inside of a sealed fuse box, the harness has an integrated O-ring to keep moisture out of the box. Rather than crushing the wires between the two halves of the box and jamming it shut, you can drill a hole, insert the flanged O-ring, get the wiring out, without letting moisture in! Connections: On the input side: Two sizes for Micro and Mini fuse taps along with a ground terminal. On the output side, the proper barrel connection to power your Morimoto XBT Bluetooth controller. The harness is controlled by a latching push-button, intended to be mounted inside your vehicle.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53982928175272,"sku":"LED153H-2","price":55.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/102483.010.jpg?v=1759773392"},{"product_id":"morimoto-oe-led-headlight-adapters-2021-ford-f150-lf498h-2","title":"OE LED Headlight Adapters: 2021+ Ford F150","description":"\u003cp\u003eGame Changer: The game has just changed, again. If you've got a 2021+ F150 and you paid extra for the OEM LED headlights, well... hindsight hurts doesn't it? If you're thinking about buying one, the Morimoto XB LED headlights for the 2021+ Ford F150 should be the first thing on your wish list. There is only one problem with that: OEM LED Trucks: If your new F150 has the OE Reflector-LED headlights, you will need to buy the LF498H adapter harnesses to ensure full-functionality with the more complex Linbus system that digitally controls the different modes for the headlights. This Harness: Will adapt the new Morimoto XB LED headlights for the 21+ F150 onto trucks that came stock with the OE Reflector-based LED headlights. Everything will be fully plug n play and work normally. It will not work on trucks that have the dual-projector lights with AFS and auto-leveling though.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983474548904,"sku":"LF498H.2","price":180.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/113071.010_5466452d-d64b-4c49-a8b9-462f2522959c.jpg?v=1759782607"},{"product_id":"morimoto-xb-led-harness-20-22-superduty-oe-led-adapters-lf508h-led-2","title":"Morimoto OEM LED to LF508 Headlight Adapter Harness 2020-2022 Ford Super Duty - LF508H-LED.2","description":"\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 2020-2022 Ford Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003eAdapts factory LED wiring to Morimoto LF508 and LF508-A headlights\u003c\/li\u003e\n\u003cli\u003ePlug and play installation\u003c\/li\u003e\n\u003cli\u003eNo cutting or modification required\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003eDesigned and tested for US-spec vehicles\u003c\/li\u003e\n\u003cli\u003eNot compatible with LF556 headlights\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Is Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2x Morimoto OEM LED to LF508 Adapter Harnesses LF508H-LED.2 (One Pair)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible With:\u003c\/li\u003e\n\u003cli\u003e2020 Ford F-250 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2021 Ford F-250 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2022 Ford F-250 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2020 Ford F-350 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2021 Ford F-350 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2022 Ford F-350 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2020 Ford F-450 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2021 Ford F-450 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003e2022 Ford F-450 Super Duty with OEM projector LED headlights\u003c\/li\u003e\n\u003cli\u003eFor use with Morimoto LF508 and LF508-A headlights only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"237\" data-end=\"510\"\u003eThe Morimoto OEM LED to LF508 Adapter Harness LF508H-LED.2 is designed for 2020-2022 Ford Super Duty trucks equipped with factory projector LED headlights. These plug and play adapters allow proper electrical connection when installing Morimoto LF508 or LF508-A headlights.\u003c\/p\u003e\n\u003cp data-start=\"512\" data-end=\"740\"\u003eEngineered for direct compatibility with stock projector LED systems, this harness ensures seamless integration without cutting or modifying the factory wiring. This kit is sold as a pair to complete installation on one vehicle.\u003c\/p\u003e\n\u003cp data-start=\"742\" data-end=\"867\"\u003eThese harnesses have been designed and tested on US-spec vehicles. Compatibility outside the United States is not guaranteed.\u003c\/p\u003e\n\u003cp data-start=\"869\" data-end=\"921\"\u003eNote: Not compatible with Morimoto LF556 headlights.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983534088360,"sku":"LF508H-LED.2","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/122821.010_6bbfb6e4-72d8-4cb4-a43b-e66a00061689.jpg?v=1759785248"},{"product_id":"morimoto-extension-rock-light-6ft-h696","title":"Extension: Rock Light (6ft)","description":"\u003cp\u003eRock Out: Far from a generic Chinese rock light with a new name etched on it, the Profile Pixel rock lights are an all-new design from Profile's industrial engineering house in California, led by Yoshitaka Ishida. Our customers are now installing these rock lights on their Jeeps, trucks, ATV's, golf carts, trailers, and we're not surprised, because they put old-school under glow kits to shame. Intensity: Look, we know most guys aren't actually using these to light up rocks out on a trail in the middle of the desert, and while you could definitely do that... The Profile Rock Lights produce the intensity required in order to be seen in the city. No matter if you mount them in your wheel wells or under the frame; their optical lens will spread plenty of light (in any color) that will not only look good, but is capable of letting you see well too if\/when you need it! What's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode... almost as if that's even more important than the rest of the colors. Well, the good news is that like the rest of the products in the Profile RGB line, they've tuned their Pixel rock lights so well that they also produce an amazingly clear and neutral white and every other color in the spectrum for that matter... .reds, blues, greens, teals, purples, pinks... you name it! Reliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! The complexity of their circuitry has been minimized to a singular PCB with no external drivers to break. The beefy cast aluminum shell and bash-proof 2mm thick PC lens over the LEDs are both strong enough to take a beating. All connections are waterproof, and all electronics are potted with resin. Setup: Once you provide the power, everything from there is designed to be completely plug n play. Though the included wiring should be plenty long to reach from front to back and everywhere in between under your Jeep\/Truck; the optional extensions ensure you enough length for a clean install. Magnetic Mounts: The optional magnetic mounts are the easiest and most effective way mount these bad boys. With 8.5kg of strength, in theory each one would be capable of holding onto more than 40 rock lights! They screw onto the bottom of the rock light with ease. If you're more of a nuts and bolts kind of guy though, each rock light has two integrated mounting points and can be attached to any surface with self-tapping screws (not included).\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983537758376,"sku":"H696","price":11.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26878.RGB_Extension_Cord.010_5ef7c97d-1a3b-4359-9c5b-545735433ddd.jpg?v=1759785348"},{"product_id":"morimoto-push-button-switch-extension-harness-baf000hxt","title":"Push-Button Switch Extension Harness","description":"\u003cp\u003eExtended: If you're installing a Morimoto switched relay harness and the switch wiring isn't quiiiiiite long enough, this handy extension adds a whopping 82.5 inches \/ 209.5 centimeters. That'll reach almost anywhere now!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983557386408,"sku":"BAF000HXT","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/135678.010_e64b0281-92e5-4edf-93fe-355be58294a7.jpg?v=1759786165"},{"product_id":"morimoto-conversion-harness-ram-oem-projector-headlights-13-18-each-h125","title":"Morimoto 13-18 Dodge Ram OEM Projector Headlight Conversion Harnesses Plug and Play - H125","description":"\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 13-18 Dodge Ram OEM or TYC projector headlights\u003c\/li\u003e\n\u003cli\u003eConverts factory quad halogen equipped trucks\u003c\/li\u003e\n\u003cli\u003ePlug and play installation\u003c\/li\u003e\n\u003cli\u003e100 percent stock wiring unmodified\u003c\/li\u003e\n\u003cli\u003eRetains all factory lighting functions\u003c\/li\u003e\n\u003cli\u003eKeeps low beams on with high beams\u003c\/li\u003e\n\u003cli\u003eDirect fit electrical connectors\u003c\/li\u003e\n\u003cli\u003eSold individually - two required per vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Is Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x Morimoto Projector Conversion Harness H125\u003c\/li\u003e\n\u003cli\u003eNote: Two harnesses are required for a full headlight conversion on one vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2018 Dodge Ram 1500, 2500, and 3500\u003c\/li\u003e\n\u003cli\u003eMust be equipped with factory quad halogen headlights\u003c\/li\u003e\n\u003cli\u003eFor use with OEM or TYC projector style headlights\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory projector equipped trucks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Morimoto 13-18 Dodge Ram OEM Projector Conversion Harness H125 is designed to convert 2009-2018 Dodge Ram trucks equipped with factory quad halogen headlights to OEM or TYC projector style headlights. This plug and play harness allows for seamless installation without modifying the factory wiring.\u003c\/p\u003e\n\u003cp\u003eAll stock lighting functions are fully retained, including keeping the low beams on with the high beams. The factory wiring remains 100 percent unmodified, ensuring clean installation and easy reversibility if needed.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984482459816,"sku":"H125","price":151.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/mori-H125-01.jpg?v=1771896627"},{"product_id":"morimoto-conversion-harness-for-halogen-tundra-with-led-drl-convert-to-oem-led-headlights-h126","title":"Morimoto Conversion Harness for Halogen Tundra with LED DRL (Convert to OEM LED Headlights)","description":"Modernize: Designed to adapt the 2014+ Toyota Tundra trucks to the brand new 2018 OEM LED Headlights from Toyota, these harnesses will allow you to upgrade to the most modern OEM look without cutting, splicing, or modifying anything on the truck's factory harness. Plug n Play: It's a seamless solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Toyota, and the inputs straight from your truck. You DO NOT need any other relay harness for this to work - its as clean as it gets! This harness keeps the low beams on when you go to high beams as well! Compatible: Though the harness itself is completely plug n play, due to the fact that the new headlights use a 7443 front turn signal bulb inside the lights versus the original 3157\/4157 - you will just need to re-pin the connector coming from your truck in order to make the blinker work properly. Simply swap the purple \u0026amp; black wire, and voila! good to go. DRL Ready: If you've got a Platinum or 1794 edition Tundra with the OEM LED DRL's already, this harness will adapt your wiring to power the new DRL feature with ease. If your truck does not have the OEM LED DRL now... not to worry! just select the optional DRL power harness. It just needs hooked up with a switched power source such as the fuse box and then you're good to go too. DRL's will always been on at full intensity with this harness. LED Heads: If you're buying this harness, then you're obviously buying the headlights too. our shop also offers em, and they can be found online in our store.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eSTOCK FUNCTIONS: 100% Retained\u003c\/li\u003e\n\u003cli\u003eBI-LED: Keeps Low Beam on w\/ High Beam\u003c\/li\u003e\n\u003cli\u003eSTOCK WIRING: 100% Unmodified\u003c\/li\u003e\n\u003cli\u003eINSTALL TYPE: Plug and play\u003c\/li\u003e\n\u003cli\u003eHYPERFLASH: None\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eWiring: 1x Morimoto Tundra (14-21) OEM LED Conversion Harness\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eTOYOTA TUNDRA: 2014-2021 w\/ Halogen Headlights\u003c\/li\u003e\n\u003cli\u003eTRUCKS W\/O OEM LED DRL: Req. DRL Power Harness (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984482754728,"sku":"H126","price":56.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27632.Toyota_Tundra_OEM_LED_Conversion_20142019.010.jpg?v=1759354431"},{"product_id":"morimoto-spare-parts-tundra-oem-led-drl-adapter-harness-replacement-h126-1","title":"Spare Parts: Tundra OEM LED DRL Adapter Harness Replacement","description":"\u003cp\u003eModernize: Designed to adapt the 2014+ Toyota Tundra trucks to the brand new 2018 OEM LED Headlights from Toyota, these harnesses will allow you to upgrade to the most modern OEM look without cutting, splicing, or modifying anything on the truck's factory harness. Plug n Play: It's a seamless solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Toyota, and the inputs straight from your truck. You DO NOT need any other relay harness for this to work - its as clean as it gets! This harness keeps the low beams on when you go to high beams as well! Compatible: Though the harness itself is completely plug n play, due to the fact that the new headlights use a 7443 front turn signal bulb inside the lights versus the original 3157\/4157 - you will just need to re-pin the connector coming from your truck in order to make the blinker work properly. Simply swap the purple \u0026amp; black wire, and voila! good to go. DRL Ready: If you've got a Platinum or 1794 edition Tundra with the OEM LED DRL's already, this harness will adapt your wiring to power the new DRL feature with ease. If your truck does not have the OEM LED DRL now... not to worry! just select the optional DRL power harness. It just needs hooked up with a switched power source such as the fuse box and then you're good to go too. DRL's will always been on at full intensity with this harness. LED Heads: If you're buying this harness, then you're obviously buying the headlights too. our shop also offers em, and they can be found online in our store.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984483344552,"sku":"H126.1","price":18.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27632.Toyota_Tundra_OEM_LED_Conversion_20142019.010_dd99ec8f-06f1-4f3a-ae63-cd9d032e492e.jpg?v=1760019635"},{"product_id":"morimoto-conversion-harness-f150-oem-hid-headlights-2009-2014-h110","title":"Morimoto OEM HID Conversion Harness for 2009-2014 Ford F-150 - H110","description":"\u003cp data-start=\"972\" data-end=\"997\"\u003e\u003cstrong data-start=\"972\" data-end=\"997\"\u003eKey Features \u0026amp; Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"998\" data-end=\"1891\"\u003e\n\u003cli data-section-id=\"1lyb2bt\" data-start=\"998\" data-end=\"1019\"\u003e\n\u003cstrong data-start=\"1000\" data-end=\"1010\"\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli data-section-id=\"1yklsxq\" data-start=\"1020\" data-end=\"1043\"\u003e\n\u003cstrong data-start=\"1022\" data-end=\"1038\"\u003ePart Number:\u003c\/strong\u003e H110\u003c\/li\u003e\n\u003cli data-section-id=\"yyo0kr\" data-start=\"1044\" data-end=\"1090\"\u003e\n\u003cstrong data-start=\"1046\" data-end=\"1063\"\u003eProduct Type:\u003c\/strong\u003e OEM HID conversion harness\u003c\/li\u003e\n\u003cli data-section-id=\"p8dnz2\" data-start=\"1091\" data-end=\"1149\"\u003e\n\u003cstrong data-start=\"1093\" data-end=\"1114\"\u003eHarness Included:\u003c\/strong\u003e 1 F-150 OEM HID conversion harness\u003c\/li\u003e\n\u003cli data-section-id=\"lnae35\" data-start=\"1150\" data-end=\"1214\"\u003e\n\u003cstrong data-start=\"1152\" data-end=\"1180\"\u003eHeadlight Compatibility:\u003c\/strong\u003e OEM bi-xenon \/ OEM HID headlights\u003c\/li\u003e\n\u003cli data-section-id=\"5423h4\" data-start=\"1215\" data-end=\"1304\"\u003e\n\u003cstrong data-start=\"1217\" data-end=\"1245\"\u003eOriginal Headlight Type:\u003c\/strong\u003e For trucks originally equipped with H13 halogen headlights\u003c\/li\u003e\n\u003cli data-section-id=\"57r5v7\" data-start=\"1305\" data-end=\"1376\"\u003e\n\u003cstrong data-start=\"1307\" data-end=\"1333\"\u003eBallast Compatibility:\u003c\/strong\u003e OEM Ford Green Label D1S\/D3S ballasts only\u003c\/li\u003e\n\u003cli data-section-id=\"ebrfyy\" data-start=\"1377\" data-end=\"1400\"\u003e\n\u003cstrong data-start=\"1379\" data-end=\"1389\"\u003eInput:\u003c\/strong\u003e 1 H13 male\u003c\/li\u003e\n\u003cli data-section-id=\"1568epq\" data-start=\"1401\" data-end=\"1454\"\u003e\n\u003cstrong data-start=\"1403\" data-end=\"1414\"\u003eOutput:\u003c\/strong\u003e 2 proprietary Ford multi-pin connectors\u003c\/li\u003e\n\u003cli data-section-id=\"1hb1o5p\" data-start=\"1455\" data-end=\"1499\"\u003e\n\u003cstrong data-start=\"1457\" data-end=\"1471\"\u003e12V Power:\u003c\/strong\u003e Nickel-plated ring terminal\u003c\/li\u003e\n\u003cli data-section-id=\"1i564zc\" data-start=\"1500\" data-end=\"1522\"\u003e\n\u003cstrong data-start=\"1502\" data-end=\"1511\"\u003eFuse:\u003c\/strong\u003e Inline 25A\u003c\/li\u003e\n\u003cli data-section-id=\"1rfz2ty\" data-start=\"1523\" data-end=\"1564\"\u003e\n\u003cstrong data-start=\"1525\" data-end=\"1540\"\u003eRelay Type:\u003c\/strong\u003e MotoControl 8-pin relay\u003c\/li\u003e\n\u003cli data-section-id=\"1c8r0is\" data-start=\"1565\" data-end=\"1632\"\u003e\n\u003cstrong data-start=\"1567\" data-end=\"1584\"\u003eMode Control:\u003c\/strong\u003e Smart capacitor for smooth lighting transitions\u003c\/li\u003e\n\u003cli data-section-id=\"wqwqs\" data-start=\"1633\" data-end=\"1691\"\u003e\n\u003cstrong data-start=\"1635\" data-end=\"1654\"\u003eHarness Design:\u003c\/strong\u003e One harness controls both headlights\u003c\/li\u003e\n\u003cli data-section-id=\"9mfazj\" data-start=\"1692\" data-end=\"1719\"\u003e\n\u003cstrong data-start=\"1694\" data-end=\"1705\"\u003eWiring:\u003c\/strong\u003e Plug and play\u003c\/li\u003e\n\u003cli data-section-id=\"e2f3aq\" data-start=\"1720\" data-end=\"1768\"\u003e\n\u003cstrong data-start=\"1722\" data-end=\"1735\"\u003eSleeving:\u003c\/strong\u003e Abrasion-resistant Techflex mesh\u003c\/li\u003e\n\u003cli data-section-id=\"yv3zkh\" data-start=\"1769\" data-end=\"1819\"\u003e\n\u003cstrong data-start=\"1771\" data-end=\"1789\"\u003eRelay Housing:\u003c\/strong\u003e Anodized aluminum relay shell\u003c\/li\u003e\n\u003cli data-section-id=\"1fmsctx\" data-start=\"1820\" data-end=\"1891\"\u003e\n\u003cstrong data-start=\"1822\" data-end=\"1839\"\u003eInstallation:\u003c\/strong\u003e Clear labeling with no cutting or splicing required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1893\" data-end=\"1905\"\u003e\u003cstrong data-start=\"1893\" data-end=\"1905\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1906\" data-end=\"2079\"\u003e\n\u003cli data-section-id=\"15sxu6a\" data-start=\"1906\" data-end=\"1960\"\u003e\u003cstrong data-start=\"1908\" data-end=\"1960\"\u003e2009-2014 Ford F-150 with H13 halogen headlights\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"1u4ckfp\" data-start=\"1961\" data-end=\"2020\"\u003e\n\u003cstrong data-start=\"1963\" data-end=\"1982\"\u003eNot Compatible:\u003c\/strong\u003e Trucks already equipped with OEM HIDs\u003c\/li\u003e\n\u003cli data-section-id=\"1xzsmfl\" data-start=\"2021\" data-end=\"2079\"\u003e\n\u003cstrong data-start=\"2023\" data-end=\"2045\"\u003eRequired Ballasts:\u003c\/strong\u003e OEM Ford Green Label D1S\/D3S only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Morimoto H110 OEM HID Conversion Harness is designed to adapt OEM bi-xenon headlights onto 2009-2014 Ford F-150 trucks originally equipped with standard H13 halogen headlamps. This plug-and-play harness lets you upgrade to factory-style HID lighting without cutting, splicing, or modifying the truck’s original wiring. Built with a MotoControl 8-pin relay, smart capacitor, inline 25A fuse, Techflex abrasion-resistant mesh sleeving, and a durable anodized aluminum relay shell, the H110 provides smooth lighting transitions, dependable operation, and a clean under-hood installation.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984483410088,"sku":"H110","price":103.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/morimoto-oem-hid-conversion-harness-2009-2014-ford-f-150-h110.jpg?v=1781276967"},{"product_id":"morimoto-hid-adapter-bmw-e39-h7-a100","title":"Morimoto HID Adapter: BMW E39: H7","description":"BMW E39 Owners: Because of the way the original halogen bulb clips into the housing, an HID bulb won't be a direct swap without these adapters. Recommended: Check your headlights for a similar looking plastic part socket behind the bulb to identify whether or not you need these. All housings would take H7 bulbs, the original part extends the +\/- connector towards the electrical socket By Design: Slotted design allows the wiring for the bulb to slide in from the side, and then original clip assembly will hold bulb firmly in place just like stock.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMaterial: High-Temp ABS Plastic\u003c\/li\u003e\n\u003cli\u003eFitment: OEM-Like\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eBULB ADAPTER: 1x BMW E39 H7 Adapter\u003c\/li\u003e\n\u003cli\u003eWarranty: N\/A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eVEHICLES: BMW E39\u003c\/li\u003e\n\u003cli\u003eHEADLIGHT TYPE: H7 Halogen Projectors\u003c\/li\u003e\n\u003cli\u003eNOTICE: REQUIRES MODIFICATION WITH MORIMOTO XB H7\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984489537704,"sku":"A100","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26925.H7_HID_Adapters_BMW_E39.010.jpg?v=1759354523"},{"product_id":"morimoto-hid-adapters-euro-h7-pair-a90","title":"HID Adapters: Euro: H7 (Pair)","description":"\u003cp\u003eBMW \/ M-B Owners: Because of the way the original halogen bulb clips into the housing, an HID bulb won't be a direct swap without these adapters. Recommended: Check your headlights for a similar looking plastic part socket behind the bulb to identify whether or not you need these. All housings would take H7 bulbs and use projectors. By Design: Slotted design allows the wiring for the bulb to slide in from the side, and then original clip assembly will hold bulb firmly in place just like stock.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984489668776,"sku":"A90","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26926.H7_HID_Adapters_Euros.010_4c8107c3-fde6-4519-acce-b9770a36a7c0.jpg?v=1760019860"},{"product_id":"morimoto-hid-adapter-mazda-v2-h7-a110","title":"HID Adapter: Mazda V2: H7","description":"\u003cp\u003eMazda Owners: Because of the way the original halogen bulb clips into the housing, an HID bulb won't be a direct swap without these adapters. Recommended: Check your headlights for a similar looking plastic part socket behind the bulb to identify whether or not you need these. By Design: Slotted design allows the wiring for the bulb to slide in from the side, and then original clip assembly will hold bulb firmly in place just like stock.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984490324136,"sku":"A110","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26922.H7_HID_Adapters_Mazda_V210_933505b7-5748-40dc-b999-2b9d44af734e.jpg?v=1760019866"},{"product_id":"morimoto-bi-xenon-relay-motocontrol-9007-9004-h80","title":"Morimoto Bi-xenon Relay: MotoControl (9007\/9004)","description":"Reality Check: Customers often ask, Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? Factory headlight outputs are really only designed to power a halogen light bub, not an HID ballast. Under Control: Morimoto makes it easy with the MotoControl 9004\/9007 Bi-Xenon relay harness. Designed to be completely plug-n-play; it's a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi\/Lo HID systems. Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it's charge between mode changes. So even if there's a short gap between the low and high beam signals from your car, your HID's will run smoothly. It's sealed weather-pack connector is new for 2014 and is a major reliability upgrade compared to other bi-xenon harnesses. Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it's wiring protected by abrasion resistant Techflex mesh sleeving and it's extruded aluminum relay shell that's been anodized and laser engraved - the MotoControl Harness will look factory fresh under the hood!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eINPUT TRIGGER: 1x 9007 Male\u003c\/li\u003e\n\u003cli\u003eBALLAST OUTPUTS: 2x 9006 Female\u003c\/li\u003e\n\u003cli\u003eHIGH BEAM OUTPUTS: 2x 9006 Female\u003c\/li\u003e\n\u003cli\u003eGROUNDS: 2x Nickel-Plated Ring-Type\u003c\/li\u003e\n\u003cli\u003e12V POWER: 1x Nickel-Plated Ring-Type\u003c\/li\u003e\n\u003cli\u003eFUSE: Inline 25A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eWiring: 1x Morimoto 9007\/9004 MotoControl Bi-Xenon Relay Harness\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFITMENTS: 9007, 9007LL\u003c\/li\u003e\n\u003cli\u003eSYSTEMS: Bi-Xenon Projectors \u0026amp; Telescoping Hi\/Lo HID Bulbs \u003c\/li\u003e\n\u003cli\u003eHALOGEN BULBS: Not Compatible \u003c\/li\u003e\n\u003cli\u003eOTHER BRANDS: May need High Beam Adapters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984501498024,"sku":"H80","price":51.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33102.MotoControl_BiXenon_9007_9004.010.jpg?v=1759354691"},{"product_id":"morimoto-pwm-harness-2stroke-anti-flicker-modules-9006-set-led1513","title":"PWM Harness: 2Stroke Anti-Flicker Modules (9006)(Set)","description":"\u003cp\u003eFlicker-Free: Is the way to be! But unfortunately if you're trying to run a set of LED headlight bulbs on a circuit that runs off pulsed voltage, then you're out of luck. Out of luck unless you've got a set of the 2Stroke Anti-Flicker harnesses that is! Designed: With some massive 10K mF Capacitors inside to help absorb the pulsing current coming from the factory wiring, then release it in a smooth fashion out into the LED bulb drivers, they're quite simple and effective. In and Out: No need for complicated wiring to solve this common issue. The 2Stroke Anti-Flickers are easy to setup. With a standard 9006 Male Input and a standard 9006 female output - in most cases you can just \"plug n play\" in between the factory wiring and the Drivers on your bulbs. Daytime Running Lights: Often run off both pulsed voltage, and low voltage. It's important to understand which one your car uses - because if you're having issues with a low voltage setup, these will not solve that problem (since they don't increase the voltage coming from the car... they just smooth it out). Construction: Can't fault that! These things are really nice looking. With a matte black extruded aluminum shell surrounding the goods inside, they're well protected and weather resistant too. High quality titanium-colored techflex mesh insulation provides extra abrasion resistance for the input and output wiring too.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984502186152,"sku":"LED1513","price":22.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27204.Morimoto_2Stroke_2_LED_AntiFlicker_Harnesses.010_df70d93f-c348-4831-b7bc-c8e870df498a.jpg?v=1760020160"},{"product_id":"morimoto-relay-harness-motocycle-single-output-h11-h131","title":"Relay Harness: MotoCycle Single Output (H11)","description":"\u003cp\u003ePower Delivery: The MotoCycle relay harness is designed to deliver steady voltage to your HID system directly from the bike's battery. Factory headlight outputs are really only designed to power a halogen light bulb and with the not-so-stable electrical systems on motorcycles - that could mean bad news for the longevity of your upgraded headlights without a harness. One of a Kind: The Morimoto H11 Single-Lamp Motorcycle specific harness is the first and only high-quality harness on the market that's designed for retrofitting HID's into the headlights on motorcycles. It's been a staple in our product line for years as the right go-to for the job. In Comparison: To any other harness we offer, the MotoCycle spec's wire lengths are ideal for the layout on a motorcycle. It is not designed for a car's engine bay and has to be modified or rigged to work on a bike - this one should be ready to go out of the box. Light Up: Each harness will power one HID ballast from one input trigger. Perfect for retrofitting either a single projector or HID in your low beam (or high beam) while still retaining independent control of the other lamp with your original switch. Work of Art: Aside from being a technical masterpiece that works like a charm, it's also a work of art. With its braided TechFlex insulation and sleek-looking black anodized relay - it will surely look factory-fresh when routed through your fairings.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984503627944,"sku":"H131","price":30.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33088.MotoCycle_Dual_Output_H11.010_9de2be60-251a-4ff6-9308-f8fa77bb5735.jpg?v=1760020191"},{"product_id":"morimoto-relay-harness-motocycle-single-output-7-h151","title":"Relay Harness: MotoCycle Single Output (7)","description":"\u003cp\u003ePower Delivery: The MotoCycle relay harness is designed to deliver steady voltage to your HID system directly from the bike's battery. Factory headlight outputs are really only designed to power a halogen light bulb and with the not-so-stable electrical systems on motorcycles - that could mean bad news for the longevity of your upgraded headlights without a harness. One of a Kind: The Morimoto H7 Single-Lamp Motorcycle specific harness is the first and only high-quality harness on the market that's designed for retrofitting HID's into the headlights on motorcycles. It's been a staple in our product line for years as the right go-to for the job. In Comparison: To any other harness we offer, the MotoCycle spec's wire lengths are ideal for the layout on a motorcycle. It is not designed for a car's engine bay and has to be modified or rigged to work on a bike - this one should be ready to go out of the box. Light Up: Each harness will power one HID ballast from one input trigger. Perfect for retrofitting either a single projector or HID in your low beam (or high beam) while still retaining independent control of the other lamp with your original switch. Work of Art: Aside from being a technical masterpiece that works like a charm, it's also a work of art. With its braided TechFlex insulation and sleek-looking black anodized relay - it will surely look factory-fresh when routed through your fairings.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984504217768,"sku":"H151","price":31.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33088.MotoCycle_Dual_Output_H11.010_71157fd6-c614-410d-83de-428d19f0ced9.jpg?v=1760020196"},{"product_id":"morimoto-relay-harness-motocycle-single-output-h4-h171","title":"Relay Harness: MotoCycle Single Output (H4)","description":"\u003cp\u003ePower Delivery: The MotoCycle relay harness is designed to deliver steady voltage to your HID system directly from the bike's battery. Factory headlight outputs are really only designed to power a halogen light bulb and with the not-so-stable electrical systems on motorcycles - that could mean bad news for the longevity of your upgraded headlights without a harness. One of a Kind: The Morimoto H4 Single-Lamp Motorcycle specific harness is the first and only high-quality harness on the market that's designed for retrofitting HID's into the headlights on motorcycles. It's been a staple in our product line for years as the right go-to for the job. In Comparison: To any other harness we offer, the MotoCycle spec's wire lengths are ideal for the layout on a motorcycle. It is not designed for a car's engine bay and has to be modified or rigged to work on a bike - this one should be ready to go out of the box. Light Up: Each harness will power one HID ballast and one high beam function (solenoid) from one input trigger. Perfect for retrofitting either a single bi-xenon (hi\/lo) projector or HID bulb in your headlight. Work of Art: Aside from being a technical masterpiece that works like a charm, it's also a work of art. With its braided TechFlex insulation and sleek-looking black anodized relay - it will surely look factory-fresh when routed through your fairings.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984504283304,"sku":"H171","price":28.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33088.MotoCycle_Dual_Output_H11.010.jpg?v=1760020202"},{"product_id":"morimoto-relay-harness-motocycle-dual-output-h11-h141","title":"Relay Harness: MotoCycle Dual Output (H11)","description":"\u003cp\u003ePower Delivery: The MotoCycle relay harness is designed to deliver steady voltage to your HID system directly from the bike's battery. Factory headlight outputs are really only designed to power a halogen light bulb and with the not-so-stable electrical systems on motorcycles - that could mean bad news for the longevity of your upgraded headlights without a harness. One of a Kind: The Morimoto H11 Dual-Output Motorcycle specific harness is the first and only high-quality harness on the market that's designed for retrofitting HID's into the headlights on motorcycles. It's been a staple in our product line for years as the right go-to for the job. In Comparison: To any other harness we offer, the MotoCycle spec's wire lengths are ideal for the layout on a motorcycle. It is not designed for a car's engine bay and has to be modified or rigged to work on a bike - this one should be ready to go out of the box. Light Up: Each harness will power two HID ballasts from one input trigger. Perfect for retrofitting a pair of projectors or HIDs in your low beams (or high beams) Work of Art: Aside from being a technical masterpiece that works like a charm, it's also a work of art. With its braided TechFlex insulation and sleek-looking black anodized relay - it will surely look factory-fresh when routed through your fairings.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984504873128,"sku":"H141","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33088.MotoCycle_Dual_Output_H11.010_f495a145-a41c-4440-a1eb-cce06856de73.jpg?v=1760020207"},{"product_id":"morimoto-relay-harness-motocycle-dual-output-h7-h161","title":"Relay Harness: MotoCycle Dual Output (H7)","description":"\u003cp\u003ePower Delivery: The MotoCycle relay harness is designed to deliver steady voltage to your HID system directly from the bike's battery. Factory headlight outputs are really only designed to power a halogen light bulb and with the not-so-stable electrical systems on motorcycles - that could mean bad news for the longevity of your upgraded headlights without a harness. One of a Kind: The Morimoto H7 Dual-Output Motorcycle specific harness is the first and only high-quality harness on the market that's designed for retrofitting HID's into the headlights on motorcycles. It's been a staple in our product line for years as the right go-to for the job. In Comparison: To any other harness we offer, the MotoCycle spec's wire lengths are ideal for the layout on a motorcycle. It is not designed for a car's engine bay and has to be modified or rigged to work on a bike - this one should be ready to go out of the box. Light Up: Each harness will power two HID ballasts from one input trigger. Perfect for retrofitting a pair of projectors or HIDs in your low beams (or high beams) Work of Art: Aside from being a technical masterpiece that works like a charm, it's also a work of art. With its braided TechFlex insulation and sleek-looking black anodized relay - it will surely look factory-fresh when routed through your fairings.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984504938664,"sku":"H161","price":28.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33088.MotoCycle_Dual_Output_H11.010_827bcff7-cfc5-40fb-bf56-9ae9d33ef918.jpg?v=1760020212"},{"product_id":"morimoto-relay-harness-motocycle-dual-output-h4-h181","title":"Relay Harness: MotoCycle Dual Output (H4)","description":"\u003cp\u003ePower Delivery: The MotoCycle relay harness is designed to deliver steady voltage to your HID system directly from the bike's battery. Factory headlight outputs are really only designed to power a halogen light bulb and with the not-so-stable electrical systems on motorcycles - that could mean bad news for the longevity of your upgraded headlights without a harness. One of a Kind: The Morimoto H4 Dual-Output Motorcycle specific harness is the first and only high-quality harness on the market that's designed for retrofitting HID's into the headlights on motorcycles. It's been a staple in our product line for years as the right go-to for the job. In Comparison: To any other harness we offer, the MotoCycle spec's wire lengths are ideal for the layout on a motorcycle. It is not designed for a car's engine bay and has to be modified or rigged to work on a bike - this one should be ready to go out of the box. Light Up: Each harness will power two HID ballasts and two high beams from one input trigger. Perfect for retrofitting a pair of hi\/lo Bi-xenon projectors or HIDs in your bike's two reflectors. Work of Art: Aside from being a technical masterpiece that works like a charm, it's also a work of art. With its braided TechFlex insulation and sleek-looking black anodized relay - it will surely look factory-fresh when routed through your fairings.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984505102504,"sku":"H181","price":30.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33088.MotoCycle_Dual_Output_H11.010_c151130e-5cc9-431b-ac52-ecfce71872dd.jpg?v=1760020217"},{"product_id":"morimoto-pwm-modules-anti-flicker-cap-link-h300","title":"PWM Modules: Anti-Flicker Cap. Link","description":"\u003cp\u003eMore and more: Modern vehicles are coming from the factory with headlight circuits that utilize pulsed voltage to run things like Daytime Running Lights or as a means to deter owners from modifying their lights. Unless you've got the right parts (ahem, this HID anti-flicker capacitor) then prepare for buzzing relays and flickering headlights! Flicker-Proof: So, you installed a HID system on your car that uses a pulsing with headlight circuit? Without a capacitor link: Even if you installed a relay harness, the ballasts and bulbs with flicker\/flash since the pulsed current coming from your factory wiring will translate into the relays - causing them to open and shut rapidly (which often sounds like a buzzing noise) Easy Fix: The Morimoto Capacitor Link has a simple plug-n-play installation between the factory output and the relay harness input with just one ground. It will intercept the pulsed voltage, store it, and then release it smoothly into the harness. This HID anti-flicker capacitor basically translates irregular \"on\/off\" signals to constant \"on\" signals. Ingredients: The Morimoto Capacitor Link utilizes a 10,000uF electrolytic capacitor, 14 gauge wiring, and OEM-quality 9006 Male\/Female Input\/outputs for universal compatibility with basically all single-xenon or low beam relay harnesses. to help back it up. If we sell it, then you bet we've put it to the test on our own cars. Need a recommendation on parts for your project? Got a tech question? contact us today!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984506970280,"sku":"H300","price":18.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33083.Morimoto_AntiFlicker_Capacitor_Link.010_1249e5d5-d9b0-4c94-994c-b1adcbca65cd.jpg?v=1760020272"},{"product_id":"morimoto-conversion-harness-for-halogen-tundra-with-amber-bulb-drl-convert-to-oem-led-headlights-h126-led","title":"Conversion Harness for Halogen Tundra with Amber Bulb DRL (Convert to OEM LED Headlights)","description":"\u003cp\u003eModernize: Designed to adapt the 2014+ Toyota Tundra trucks to the brand new 2018 OEM LED Headlights from Toyota, these harnesses will allow you to upgrade to the most modern OEM look without cutting, splicing, or modifying anything on the truck's factory harness. Plug n Play: It's a seamless solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Toyota, and the inputs straight from your truck. You DO NOT need any other relay harness for this to work - its as clean as it gets! This harness keeps the low beams on when you go to high beams as well! Compatible: Though the harness itself is completely plug n play, due to the fact that the new headlights use a 7443 front turn signal bulb inside the lights versus the original 3157\/4157 - you will just need to re-pin the connector coming from your truck in order to make the blinker work properly. Simply swap the purple \u0026amp; black wire, and voila! good to go. DRL Ready: If you've got a Platinum or 1794 edition Tundra with the OEM LED DRL's already, this harness will adapt your wiring to power the new DRL feature with ease. If your truck does not have the OEM LED DRL now... not to worry! just select the optional DRL power harness. It just needs hooked up with a switched power source such as the fuse box and then you're good to go too. DRL's will always been on at full intensity with this harness. LED Heads: If you're buying this harness, then you're obviously buying the headlights too. our shop also offers em, and they can be found online in our store.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984509821096,"sku":"H126-LED","price":130.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27632.Toyota_Tundra_OEM_LED_Conversion_20142019.010_86b5fcb9-3a5a-4f23-a7a1-a135c61460e6.jpg?v=1760020400"},{"product_id":"morimoto-hd-relay-9005-9006-9012-h10-h10","title":"Morimoto HD Relay: 9005\/9006\/9012\/H10","description":"Reality Check: Customers often ask, Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? Factory headlight outputs are really only designed to power a halogen light bulb, not an HID ballast. Don't Skimp: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at our shop. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit - check out the Standalone Canbus or Mopar Spec harnesses from Morimoto Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn't be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem. OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it's wiring protected by abrasion-resistant Techflex mesh sleeving and OEM-style relay cubes held together by a mounting bracket cut from polished stainless - the HD relay will look factory fresh under the hood!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eINPUT TRIGGER: 1x 9006 Male\u003c\/li\u003e\n\u003cli\u003eBALLAST OUTPUTS: 2x 9006 Female\u003c\/li\u003e\n\u003cli\u003eGROUND: 1x Nickel-Plated Ring-Type\u003c\/li\u003e\n\u003cli\u003e12V POWER: 1x Nickel-Plated Ring-Type\u003c\/li\u003e\n\u003cli\u003eFUSE: Inline 25A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eWiring: 1x 9005\/9006\/9012\/H10 HD Relay Harness\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFITMENTS: 9005, 9006, 9012, or H10\u003c\/li\u003e\n\u003cli\u003eHID SYSTEMS: Low Beams, High Beams, or Fog Lights\u003c\/li\u003e\n\u003cli\u003eBI-XENON PROJECTORS: Req. High Beam Splitters (not included)\u003c\/li\u003e\n\u003cli\u003ePWM PULSING SIGNAL: Req. Capacitor Link (not included)\u003c\/li\u003e\n\u003cli\u003eCANBUS SYSTEMS: Req. Standalone Canbus or Mopar Spec harnesses (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984511230120,"sku":"H10","price":45.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26865.HD_Relay_880.010.jpg?v=1759354823"},{"product_id":"morimoto-adapter-h1-h3-male-to-9006-female-h550","title":"Morimoto H1\/H3 Male to 9006 Female Wiring Adapter - H550","description":"\u003cp\u003eWhen two lighting components use different connector standards, the right adapter is the difference between a tidy installation and a wiring project. The Adapter: H1\/H3 Male to 9006 Female is a purpose-specific adapter harness for automotive lighting and retrofit work. It bridges H1\/H3 Male to 9006 Female. It is designed to make the intended connection without forcing installers to repin compatible components or build a one-off jumper from scratch.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e H550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Thickness:\u003c\/strong\u003e 14 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Approx. 6in \/ 150mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Braided TechFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 1:\u003c\/strong\u003e H1\/H3 Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 2:\u003c\/strong\u003e 9006 Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog Weight:\u003c\/strong\u003e 0.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eINPUT TYPE: 9006 Female\u003c\/li\u003e\n\u003cli\u003eOUTPUT TYPE: H1 Male\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWiring Adapter:\u003c\/strong\u003e 1x H1 Male to 9006 Female Adapter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2 Years limited warranty as listed for this product. Warranty terms and eligibility are subject to the manufacturer's current policy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984511328424,"sku":"H550","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27615.Headlight_Socket_Adapters.010_1bd49436-8bdb-4d64-ae5f-98ddfc42c045.jpg?v=1760020439"},{"product_id":"morimoto-adapter-h7-male-to-9006-female-h560","title":"Morimoto H7 Male to 9006 Female Wiring Adapter - H560","description":"\u003cp\u003eWhen two lighting components use different connector standards, the right adapter is the difference between a tidy installation and a wiring project. The Adapter: H7 Male to 9006 Female is a purpose-specific adapter harness for automotive lighting and retrofit work. It bridges H7 Male to 9006 Female. It is designed to make the intended connection without forcing installers to repin compatible components or build a one-off jumper from scratch.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e H560\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Thickness:\u003c\/strong\u003e 14 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Approx. 6in \/ 150mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Braided TechFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 1:\u003c\/strong\u003e H7 Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 2:\u003c\/strong\u003e 9006 Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog Weight:\u003c\/strong\u003e 0.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eINPUT TYPE: 9006 Female\u003c\/li\u003e\n\u003cli\u003eOUTPUT TYPE: H7 Male\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWiring Adapter:\u003c\/strong\u003e 1x H7 Male to 9006 Female Adapter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2 Years limited warranty as listed for this product. Warranty terms and eligibility are subject to the manufacturer's current policy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984511918248,"sku":"H560","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27615.Headlight_Socket_Adapters.010_a97659fc-491b-469f-a571-c5be51938667.jpg?v=1760020450"},{"product_id":"morimoto-adapter-h8-h9-h11-male-to-9006-female-h660","title":"Morimoto H8\/H9\/H11 Male to 9006 Female Wiring Adapter - H660","description":"\u003cp\u003eWhen two lighting components use different connector standards, the right adapter is the difference between a tidy installation and a wiring project. The Adapter: H8\/H9\/H11 Male to 9006 Female is a purpose-specific adapter harness for automotive lighting and retrofit work. It bridges H8\/H9\/H11 Male to 9006 Female. It is designed to make the intended connection without forcing installers to repin compatible components or build a one-off jumper from scratch.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e H660\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Thickness:\u003c\/strong\u003e 14 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Approx. 6in \/ 150mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Braided TechFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 1:\u003c\/strong\u003e H8\/H9\/H11 Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 2:\u003c\/strong\u003e 9006 Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog Weight:\u003c\/strong\u003e 0.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eINPUT TYPE: 9006 Female\u003c\/li\u003e\n\u003cli\u003eOUTPUT TYPE: H11 Male\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWiring Adapter:\u003c\/strong\u003e 1x H11 Male to 9006 Female Adapter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eTwo (2) Years limited warranty as listed for this product. Warranty terms and eligibility are subject to the manufacturer's current policy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984511951016,"sku":"H660","price":10.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27615.Headlight_Socket_Adapters.010_859b04c0-b18c-4d4d-8865-2136eea89dcc.jpg?v=1760020461"},{"product_id":"morimoto-hd-relay-h11-h9-h8-880-h40","title":"HD Relay: H11\/H9\/H8\/880","description":"\u003cp\u003eReality Check: Customers often ask, Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? Factory headlight outputs are really only designed to power a halogen light bulb, not an HID ballast. Don't Skimp: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at our shop. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit - check out the Standalone Canbus or Mopar Spec harnesses from Morimoto Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn't be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem. OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it's wiring protected by abrasion-resistant Techflex mesh sleeving and OEM-style relay cubes held together by a mounting bracket cut from polished stainless - the HD relay will look factory fresh under the hood!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984512606376,"sku":"H40","price":56.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26865.HD_Relay_880.010_f938e536-4c1b-4aff-84d8-add88a870f83.jpg?v=1760020473"},{"product_id":"morimoto-hd-relay-h7-mmh30","title":"HD Relay: H7","description":"\u003cp\u003eReality Check: Customers often ask, Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? Factory headlight outputs are really only designed to power a halogen light bulb, not an HID ballast. Don't Skimp: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at our shop. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit - check out the Standalone Canbus or Mopar Spec harnesses from Morimoto Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn't be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem. OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it's wiring protected by abrasion-resistant Techflex mesh sleeving and OEM-style relay cubes held together by a mounting bracket cut from polished stainless - the HD relay will look factory fresh under the hood!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984512671912,"sku":"MMH30","price":55.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26865.HD_Relay_880.010_eca4816b-2af8-4498-8cde-f99c60fb8856.jpg?v=1760020485"},{"product_id":"morimoto-adapter-5202-male-to-9006-female-h580","title":"Morimoto 5202 Male to 9006 Female Wiring Adapter - H580","description":"\u003cp\u003eWhen two lighting components use different connector standards, the right adapter is the difference between a tidy installation and a wiring project. The Adapter: 5202 Male to 9006 Female is a purpose-specific adapter harness for automotive lighting and retrofit work. It bridges 5202 Male to 9006 Female. It is designed to make the intended connection without forcing installers to repin compatible components or build a one-off jumper from scratch.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e H580\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Thickness:\u003c\/strong\u003e 14 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Approx. 6in \/ 150mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Braided TechFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 1:\u003c\/strong\u003e 5202 Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 2:\u003c\/strong\u003e 9006 Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog Weight:\u003c\/strong\u003e 0.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eINPUT TYPE: 9006 Female\u003c\/li\u003e\n\u003cli\u003eOUTPUT TYPE: 5202 Male\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWiring Adapter:\u003c\/strong\u003e 1x 5202 Male to 9006 Female Adapter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eTwo (2) Years limited warranty as listed for this product. Warranty terms and eligibility are subject to the manufacturer's current policy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984512704680,"sku":"H580","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27615.Headlight_Socket_Adapters.010_ebe683f9-cfce-4499-8102-c481fc531d7c.jpg?v=1760020495"},{"product_id":"morimoto-adapter-9007-male-to-9006-female-h650","title":"Morimoto 9007 Male to 9006 Female Wiring Adapter - H650","description":"\u003cp\u003eWhen two lighting components use different connector standards, the right adapter is the difference between a tidy installation and a wiring project. The Adapter: 9007 Male to 9006 Female is a purpose-specific adapter harness for automotive lighting and retrofit work. It bridges 9007 Male to 9006 Female. It is designed to make the intended connection without forcing installers to repin compatible components or build a one-off jumper from scratch.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e H650\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Thickness:\u003c\/strong\u003e 14 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Approx. 6in \/ 150mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Braided TechFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 1:\u003c\/strong\u003e 9007 Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 2:\u003c\/strong\u003e 9006 Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog Weight:\u003c\/strong\u003e 0.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eINPUT TYPE: 9006 Female\u003c\/li\u003e\n\u003cli\u003eOUTPUT TYPE: 9007 Male\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWiring Adapter:\u003c\/strong\u003e 1x 9007 Male to 9006 Female Adapter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2 Years limited warranty as listed for this product. Warranty terms and eligibility are subject to the manufacturer's current policy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984513327272,"sku":"H650","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27615.Headlight_Socket_Adapters.010_29a278b9-b70e-4c4c-8528-0b744ee1fb4a.jpg?v=1760020506"},{"product_id":"morimoto-pwm-harness-morimoto-standalone-canbus-h7-h210","title":"PWM Harness: Morimoto Standalone Canbus (H7)","description":"\u003cp\u003ePerfect: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to \"bulb out\" warning lamps and flickering caused by \"can-bus\" systems. Effective: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Powerful: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit. Euro-Centric: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. The Standalone wiring harnesses DO NOT however work well on domestic cars\/trucks like Chrysler\/Dodge\/Jeep. You guys need Morimoto's \"Mopar Spec\" Stuff! Simple: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it's that easy. Input here, output there... done. Sold as a pair: The standalone canbus headlight harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one. NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984513982632,"sku":"H210","price":32.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27617.CanBus_Morimoto_Standalone_2.010_c9d57615-4c5f-44cf-826b-d2df3503c315.jpg?v=1760020517"},{"product_id":"morimoto-pwm-harness-morimoto-standalone-canbus-h11-h8-h9-880-h220","title":"PWM Harness: Morimoto Standalone Canbus (H11\/H8\/H9\/880)","description":"\u003cp\u003ePerfect: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to \"bulb out\" warning lamps and flickering caused by \"can-bus\" systems. Effective: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Powerful: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit. Euro-Centric: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. The Standalone wiring harnesses DO NOT however work well on domestic cars\/trucks like Chrysler\/Dodge\/Jeep. You guys need Morimoto's \"Mopar Spec\" Stuff! Simple: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it's that easy. Input here, output there... done. Sold as a pair: The standalone canbus headlight harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one. NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984514605224,"sku":"H220","price":33.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27617.CanBus_Morimoto_Standalone_2.010.jpg?v=1760020523"},{"product_id":"morimoto-pwm-harness-morimoto-standalone-canbus-h1-h3-h200","title":"PWM Harness: Morimoto Standalone Canbus (H1\/H3)","description":"\u003cp\u003ePerfect: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to \"bulb out\" warning lamps and flickering caused by \"can-bus\" systems. Effective: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Powerful: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit. Euro-Centric: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. The Standalone wiring harnesses DO NOT however work well on domestic cars\/trucks like Chrysler\/Dodge\/Jeep. You guys need Morimoto's \"Mopar Spec\" Stuff! Simple: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it's that easy. Input here, output there... done. Sold as a pair: The standalone canbus headlight harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one. NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984514703528,"sku":"H200","price":32.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27617.CanBus_Morimoto_Standalone_2.010_03ee8253-7dbb-4ea9-b6b9-1421583a799b.jpg?v=1760020530"},{"product_id":"morimoto-hd-relay-5202-psx24w-h50","title":"HD Relay: 5202\/PSX24W","description":"\u003cp\u003eReality Check: Customers often ask, Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? Factory headlight outputs are really only designed to power a halogen light bulb, not an HID ballast. Don't Skimp: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at our shop. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit - check out the Standalone Canbus or Mopar Spec harnesses from Morimoto Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn't be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem. OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it's wiring protected by abrasion-resistant Techflex mesh sleeving and OEM-style relay cubes held together by a mounting bracket cut from polished stainless - the HD relay will look factory fresh under the hood!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984514932904,"sku":"H50","price":55.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26865.HD_Relay_880.010_53b058b0-0381-43dd-8f88-e13540b03033.jpg?v=1760020544"},{"product_id":"morimoto-pwm-harness-morimoto-standalone-canbus-5202-psx24w-h230","title":"PWM Harness: Morimoto Standalone Canbus (5202\/PSX24W)","description":"\u003cp\u003ePerfect: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to \"bulb out\" warning lamps and flickering caused by \"can-bus\" systems. Effective: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Powerful: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit. Euro-Centric: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. The Standalone wiring harnesses DO NOT however work well on domestic cars\/trucks like Chrysler\/Dodge\/Jeep. You guys need Morimoto's \"Mopar Spec\" Stuff! Simple: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it's that easy. Input here, output there...done. Sold as a pair: The standalone canbus headlight harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one. NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984518897832,"sku":"H230","price":32.3,"currency_code":"USD","in_stock":true}]},{"product_id":"morimoto-mustang-oem-hid-conversion-2010-2012-h111","title":"Morimoto OEM HID Conversion Harness for 2010-2012 Ford Mustang - H111","description":"\u003cp data-start=\"1024\" data-end=\"1049\"\u003e\u003cstrong data-start=\"1024\" data-end=\"1049\"\u003eKey Features \u0026amp; Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1050\" data-end=\"1921\"\u003e\n\u003cli data-section-id=\"1lyb2bt\" data-start=\"1050\" data-end=\"1071\"\u003e\n\u003cstrong data-start=\"1052\" data-end=\"1062\"\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli data-section-id=\"1yklsxr\" data-start=\"1072\" data-end=\"1095\"\u003e\n\u003cstrong data-start=\"1074\" data-end=\"1090\"\u003ePart Number:\u003c\/strong\u003e H111\u003c\/li\u003e\n\u003cli data-section-id=\"yyo0kr\" data-start=\"1096\" data-end=\"1142\"\u003e\n\u003cstrong data-start=\"1098\" data-end=\"1115\"\u003eProduct Type:\u003c\/strong\u003e OEM HID conversion harness\u003c\/li\u003e\n\u003cli data-section-id=\"sl5jxy\" data-start=\"1143\" data-end=\"1203\"\u003e\n\u003cstrong data-start=\"1145\" data-end=\"1166\"\u003eHarness Included:\u003c\/strong\u003e 1 Mustang OEM HID conversion harness\u003c\/li\u003e\n\u003cli data-section-id=\"zkdakb\" data-start=\"1204\" data-end=\"1281\"\u003e\n\u003cstrong data-start=\"1206\" data-end=\"1234\"\u003eHeadlight Compatibility:\u003c\/strong\u003e 2010-2012 Ford Mustang OEM bi-xenon headlights\u003c\/li\u003e\n\u003cli data-section-id=\"1eyh7qs\" data-start=\"1282\" data-end=\"1373\"\u003e\n\u003cstrong data-start=\"1284\" data-end=\"1312\"\u003eOriginal Headlight Type:\u003c\/strong\u003e For Mustangs originally equipped with H13 halogen headlights\u003c\/li\u003e\n\u003cli data-section-id=\"57r5v7\" data-start=\"1374\" data-end=\"1445\"\u003e\n\u003cstrong data-start=\"1376\" data-end=\"1402\"\u003eBallast Compatibility:\u003c\/strong\u003e OEM Ford Green Label D1S\/D3S ballasts only\u003c\/li\u003e\n\u003cli data-section-id=\"9mfazj\" data-start=\"1446\" data-end=\"1473\"\u003e\n\u003cstrong data-start=\"1448\" data-end=\"1459\"\u003eWiring:\u003c\/strong\u003e Plug and play\u003c\/li\u003e\n\u003cli data-section-id=\"1rfz2ty\" data-start=\"1474\" data-end=\"1515\"\u003e\n\u003cstrong data-start=\"1476\" data-end=\"1491\"\u003eRelay Type:\u003c\/strong\u003e MotoControl 8-pin relay\u003c\/li\u003e\n\u003cli data-section-id=\"d0lau4\" data-start=\"1516\" data-end=\"1578\"\u003e\n\u003cstrong data-start=\"1518\" data-end=\"1535\"\u003eMode Control:\u003c\/strong\u003e Built-in capacitors for smooth transitions\u003c\/li\u003e\n\u003cli data-section-id=\"ha6dcp\" data-start=\"1579\" data-end=\"1633\"\u003e\n\u003cstrong data-start=\"1581\" data-end=\"1595\"\u003eConnector:\u003c\/strong\u003e Updated weather-pack connector design\u003c\/li\u003e\n\u003cli data-section-id=\"wqwqs\" data-start=\"1634\" data-end=\"1692\"\u003e\n\u003cstrong data-start=\"1636\" data-end=\"1655\"\u003eHarness Design:\u003c\/strong\u003e One harness controls both headlights\u003c\/li\u003e\n\u003cli data-section-id=\"e2f3aq\" data-start=\"1693\" data-end=\"1741\"\u003e\n\u003cstrong data-start=\"1695\" data-end=\"1708\"\u003eSleeving:\u003c\/strong\u003e Abrasion-resistant Techflex mesh\u003c\/li\u003e\n\u003cli data-section-id=\"xaifol\" data-start=\"1742\" data-end=\"1807\"\u003e\n\u003cstrong data-start=\"1744\" data-end=\"1761\"\u003eInstallation:\u003c\/strong\u003e Labeled components and optimized wire lengths\u003c\/li\u003e\n\u003cli data-section-id=\"1kf7538\" data-start=\"1808\" data-end=\"1921\"\u003e\n\u003cstrong data-start=\"1810\" data-end=\"1821\"\u003eNotice:\u003c\/strong\u003e Orange Label D1S ballasts require snipping the green wire on the ballast input inside the headlight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1923\" data-end=\"1935\"\u003e\u003cstrong data-start=\"1923\" data-end=\"1935\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1936\" data-end=\"2216\"\u003e\n\u003cli data-section-id=\"1tj9b9u\" data-start=\"1936\" data-end=\"1981\"\u003e\u003cstrong data-start=\"1938\" data-end=\"1981\"\u003e2010-2012 Ford Mustang without OEM HIDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"1fdkmo0\" data-start=\"1982\" data-end=\"2053\"\u003e\n\u003cstrong data-start=\"1984\" data-end=\"2003\"\u003eNot Compatible:\u003c\/strong\u003e Vehicles already equipped with OEM HID headlights\u003c\/li\u003e\n\u003cli data-section-id=\"1xzsmfl\" data-start=\"2054\" data-end=\"2112\"\u003e\n\u003cstrong data-start=\"2056\" data-end=\"2078\"\u003eRequired Ballasts:\u003c\/strong\u003e OEM Ford Green Label D1S\/D3S only\u003c\/li\u003e\n\u003cli data-section-id=\"i64jok\" data-start=\"2113\" data-end=\"2216\"\u003e\n\u003cstrong data-start=\"2115\" data-end=\"2137\"\u003eModification Note:\u003c\/strong\u003e Orange Label D1S ballasts require green wire modification at the ballast input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Morimoto H111 OEM HID Conversion Harness is designed to adapt 2010-2012 Ford Mustang OEM bi-xenon headlights onto Mustang models originally equipped with standard H13 halogen headlamps. This plug-and-play harness provides a clean upgrade path without cutting or modifying the factory wiring, helping retain factory integrity while adding the modern look and performance of OEM HID lighting. Built with Morimoto’s MotoControl 8-pin relay, abrasion-resistant Techflex mesh sleeving, labeled components, and an upgraded weather-pack connector, the H111 delivers reliable operation, smooth mode transitions, and a straightforward installation.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984520274088,"sku":"H111","price":103.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/morimoto-oem-hid-conversion-harness-2010-2012-ford-mustang-h111.avif?v=1781277298"},{"product_id":"morimoto-adapter-h13-male-to-9006-female-h590","title":"Morimoto H13 Male to 9006 Female Wiring Adapter - H590","description":"\u003cp\u003eWhen two lighting components use different connector standards, the right adapter is the difference between a tidy installation and a wiring project. The Adapter: H13 Male to 9006 Female is a purpose-specific adapter harness for automotive lighting and retrofit work. It bridges H13 Male to 9006 Female. It is designed to make the intended connection without forcing installers to repin compatible components or build a one-off jumper from scratch.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Specs\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e H590\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As:\u003c\/strong\u003e Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Thickness:\u003c\/strong\u003e 14 AWG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Approx. 6in \/ 150mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e Braided TechFlex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 1:\u003c\/strong\u003e H13 Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector 2:\u003c\/strong\u003e 9006 Female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCatalog Weight:\u003c\/strong\u003e 0.1 lb\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eINPUT TYPE: 9006 Female\u003c\/li\u003e\n\u003cli\u003eOUTPUT TYPE: H13 Male\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eWiring Adapter:\u003c\/strong\u003e 1x H13 Male to 9006 Female Adapter\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2 Years limited warranty as listed for this product. Warranty terms and eligibility are subject to the manufacturer's current policy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984523550888,"sku":"H590","price":11.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27615.Headlight_Socket_Adapters.010_1e9a75e5-879f-414f-a23c-694b1eeb4868.jpg?v=1760020781"},{"product_id":"morimoto-conversion-harness-h13-led-to-jeep-jl-18-h127","title":"Conversion Harness: H13 LED to Jeep JL (18+)","description":"\u003cp\u003eJeep JL Headlight Upgrades: There are relatively few headlight upgrades available for the Jeep JL, that is, unless you go with a set of traditional 7in Rounds that were developed for the JK paired with a set of the JL Adapters for the JL. Problem is, those headlights all come with H13 inputs, whereas the new JL has a proprietary multi-pin connector...! so you're going to need an adapter. This one, to be exact. Plug and Play: It's a seamless solution to keep your low and high beams working perfectly as they should from the standard control stalk inside your Jeep JL Wrangler. The outputs will plug directly into the multi-pin connector on the back of the H13 7in LED headlight, and the inputs straight from your new Wrangler. You don't need any other harnesses or modifications to make this work -- about as clean as it comes! Quality: Morimoto has been building special wire harnesses for the automotive lighting industry for well over a decade now. Everything is sealed, crimped, and loomed perfectly according to OEM standards, so you shouldn't have any concerns about reliability when running this harness. It's as solid as your Wrangler to begin with!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984525516968,"sku":"H127","price":34.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/41582.Jeep_Wrangler_JL_Headlight_Conversion.010_1654336e-02f2-4803-be96-4bae1c52691e.jpg?v=1760020856"},{"product_id":"morimoto-conversion-harness-tacoma-oem-led-headlights-16-23-h128","title":"Morimoto OEM LED Headlight Conversion Harness 2016-2023 Toyota Tacoma Plug and Play - H128","description":"\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 2016-2023 Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003eFor vehicles with OEM LED DRL headlights\u003c\/li\u003e\n\u003cli\u003eOEM LED headlight conversion harness\u003c\/li\u003e\n\u003cli\u003ePlug and play installation\u003c\/li\u003e\n\u003cli\u003e100 percent stock wiring unmodified\u003c\/li\u003e\n\u003cli\u003eRetains all factory lighting functions\u003c\/li\u003e\n\u003cli\u003eKeeps low beams on with high beams\u003c\/li\u003e\n\u003cli\u003eNo hyperflash\u003c\/li\u003e\n\u003cli\u003eSold individually - two required per vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat Is Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Morimoto OEM LED Conversion Harness H128\u003c\/li\u003e\n\u003cli\u003eNote: Two harnesses are required for a complete headlight conversion on one vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2016-2023 Toyota Tacoma\u003c\/li\u003e\n\u003cli\u003eMust be equipped with OEM LED DRL headlights\u003c\/li\u003e\n\u003cli\u003eFor use with OEM LED headlight assemblies only\u003c\/li\u003e\n\u003cli\u003eNot compatible with halogen headlight equipped models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp data-start=\"232\" data-end=\"516\"\u003eThe Morimoto OEM LED Conversion Harness H128 is designed for 2016-2023 Toyota Tacoma models equipped with OEM LED DRL headlights. This plug and play harness allows installation of OEM LED headlights while retaining all factory lighting functions without modifying the original wiring.\u003c\/p\u003e\n\u003cp data-start=\"518\" data-end=\"779\"\u003eAll stock functions are fully retained, including keeping the low beams on with the high beams. The factory wiring remains 100 percent unmodified, ensuring a clean and reversible installation. No hyperflash or error codes are introduced when properly installed.\u003c\/p\u003e\n\u003cp data-start=\"781\" data-end=\"877\"\u003eThis listing is for one harness. Two harnesses are required for a complete vehicle installation.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984527614120,"sku":"H128","price":146.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/mori-tacoma-led-conv-harness-H128-01.jpg?v=1771897184"},{"product_id":"morimoto-bi-xenon-relay-motocontrol-h13-9008-h70","title":"Bi-xenon Relay: MotoControl (H13\/9008)","description":"\u003cp\u003eChrysler Canbus: Modern Chrysler products like the Dodge Ram and Jeep JK Wrangler all have super picky \"can-bus\" systems that monitor for changes in the headlight circuit and cause all kinds of problems when doing an HID conversion. When a normal harness just won't cut it, we always recommend the Mopar Spec MotoControl Bi-xenon relay harness from Morimoto. What's in a Name: Though its name suggests it will only work on a Chrysler vehicle, this harness is becoming more and more commonly needed on a lot of modern vehicles. Don't have a \"lamp out\" warning, but suffering from annoying pulsing current coming from your factory headlight circuit and causing your lights to flicker? this is your answer. Can't Resist: The H13 Bi-xenon Mopar Spec harness utilizes two 50W load resistors with unique blue anodized heat-sinks to safely add that \"missing\" resistance back into the headlight circuit. There is also a 4700mF capacitor to help absorb any pulsing signals emitted from the stock output for uninterrupted relay function. Under Control: Morimoto makes it easy with the MotoControl H13\/9008 Bi-xenon relay harness. Designed to be completely plug-n-play; it's a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi\/Lo HID systems. Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it's charge between mode changes. So even if there's a short gap between the low and high beam signals from your car, your HID's will run smoothly. It's sealed weather-pack connector was recently updated in 2015 and is a major reliability upgrade compared to other bi-xenon harnesses. Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). OEM Grade: Aside from being ahead of the game from a technical standpoint, the Morimoto Spec Bi-xenon Harness is also a work of art. With it's wiring protected by abrasion resistant Techflex mesh sleeving and it's extruded aluminum relay shell that's been anodized and laser engraved - the MotoControl Harness will look factory fresh under the hood!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984527679656,"sku":"H70","price":51.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33103.MotoControl_BiXenon_H13_9008.010_ac4c7217-d221-45f7-8328-29949c0f8a2b.jpg?v=1760020940"},{"product_id":"morimoto-2015-17-f150-led-conversion-harness-set-h122","title":"Morimoto OEM LED Conversion Harness for 2015-2017 Ford F-150 - H122","description":"\u003cp data-start=\"1011\" data-end=\"1036\"\u003e\u003cstrong data-start=\"1011\" data-end=\"1036\"\u003eKey Features \u0026amp; Specs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1037\" data-end=\"1831\"\u003e\n\u003cli data-section-id=\"1lyb2bt\" data-start=\"1037\" data-end=\"1058\"\u003e\n\u003cstrong data-start=\"1039\" data-end=\"1049\"\u003eBrand:\u003c\/strong\u003e Morimoto\u003c\/li\u003e\n\u003cli data-section-id=\"1yklsv3\" data-start=\"1059\" data-end=\"1082\"\u003e\n\u003cstrong data-start=\"1061\" data-end=\"1077\"\u003ePart Number:\u003c\/strong\u003e H122\u003c\/li\u003e\n\u003cli data-section-id=\"11tp277\" data-start=\"1083\" data-end=\"1129\"\u003e\n\u003cstrong data-start=\"1085\" data-end=\"1102\"\u003eProduct Type:\u003c\/strong\u003e OEM LED conversion harness\u003c\/li\u003e\n\u003cli data-section-id=\"xhyb9v\" data-start=\"1130\" data-end=\"1207\"\u003e\n\u003cstrong data-start=\"1132\" data-end=\"1155\"\u003eHarnesses Included:\u003c\/strong\u003e 2 F-150 OEM LED conversion harnesses with resistors\u003c\/li\u003e\n\u003cli data-section-id=\"1qlyn6i\" data-start=\"1208\" data-end=\"1262\"\u003e\n\u003cstrong data-start=\"1210\" data-end=\"1238\"\u003eHeadlight Compatibility:\u003c\/strong\u003e Ford OEM LED headlights\u003c\/li\u003e\n\u003cli data-section-id=\"9mfazj\" data-start=\"1263\" data-end=\"1290\"\u003e\n\u003cstrong data-start=\"1265\" data-end=\"1276\"\u003eWiring:\u003c\/strong\u003e Plug and play\u003c\/li\u003e\n\u003cli data-section-id=\"1pgwuzt\" data-start=\"1291\" data-end=\"1375\"\u003e\n\u003cstrong data-start=\"1293\" data-end=\"1310\"\u003eBeam Control:\u003c\/strong\u003e Retains low and high beam control through factory cabin controls\u003c\/li\u003e\n\u003cli data-section-id=\"x7l6nr\" data-start=\"1376\" data-end=\"1445\"\u003e\n\u003cstrong data-start=\"1378\" data-end=\"1398\"\u003eConnection Type:\u003c\/strong\u003e Plugs into Ford headlight multi-pin connectors\u003c\/li\u003e\n\u003cli data-section-id=\"yooq7c\" data-start=\"1446\" data-end=\"1492\"\u003e\n\u003cstrong data-start=\"1448\" data-end=\"1463\"\u003eRelay Type:\u003c\/strong\u003e HD Relay MotoControl harness\u003c\/li\u003e\n\u003cli data-section-id=\"2lfjp1\" data-start=\"1493\" data-end=\"1545\"\u003e\n\u003cstrong data-start=\"1495\" data-end=\"1509\"\u003eResistors:\u003c\/strong\u003e Included for reliable LED operation\u003c\/li\u003e\n\u003cli data-section-id=\"e2f3aq\" data-start=\"1546\" data-end=\"1594\"\u003e\n\u003cstrong data-start=\"1548\" data-end=\"1561\"\u003eSleeving:\u003c\/strong\u003e Abrasion-resistant Techflex mesh\u003c\/li\u003e\n\u003cli data-section-id=\"k58qr\" data-start=\"1595\" data-end=\"1680\"\u003e\n\u003cstrong data-start=\"1597\" data-end=\"1615\"\u003eRelay Housing:\u003c\/strong\u003e Extruded aluminum shell with anodized finish and laser engraving\u003c\/li\u003e\n\u003cli data-section-id=\"fh5hm0\" data-start=\"1681\" data-end=\"1732\"\u003e\n\u003cstrong data-start=\"1683\" data-end=\"1700\"\u003eInstallation:\u003c\/strong\u003e No cutting or splicing required\u003c\/li\u003e\n\u003cli data-section-id=\"1ofpkkc\" data-start=\"1733\" data-end=\"1831\"\u003e\n\u003cstrong data-start=\"1735\" data-end=\"1754\"\u003eDesign Benefit:\u003c\/strong\u003e Helps provide consistent LED functionality and a modern OEM lighting upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1833\" data-end=\"1845\"\u003e\u003cstrong data-start=\"1833\" data-end=\"1845\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1846\" data-end=\"1987\"\u003e\n\u003cli data-section-id=\"krr1d6\" data-start=\"1846\" data-end=\"1896\"\u003e\u003cstrong data-start=\"1848\" data-end=\"1896\"\u003e2015-2017 Ford F-150 with OEM LED headlights\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-section-id=\"cscrn8\" data-start=\"1897\" data-end=\"1987\"\u003e\n\u003cstrong data-start=\"1899\" data-end=\"1918\"\u003eNot Compatible:\u003c\/strong\u003e Other headlight or vehicle applications unless specified by Morimoto\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Morimoto H122 OEM LED Conversion Harness is designed to upgrade 2015-2017 Ford F-150 trucks to OEM LED headlights with a clean plug-and-play installation. Built to provide reliable LED headlight performance regardless of the truck’s BCM setup, this harness kit integrates the low and high beam functions through the factory cabin controls without cutting or splicing. Each harness plugs directly into the multi-pin connector on the back of the Ford OEM LED headlight, while resistors, abrasion-resistant Techflex mesh sleeving, and an anodized aluminum relay shell help deliver dependable function and a factory-fresh under-hood appearance.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984529678504,"sku":"H122","price":372.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/morimoto-oem-led-conversion-harness-2015-2017-ford-f-150-h122.jpg?v=1781277167"},{"product_id":"morimoto-hd-relay-h1-h3-h20","title":"HD Relay: H1\/H3","description":"\u003cp\u003eReality Check: Customers often ask, Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? Factory headlight outputs are really only designed to power a halogen light bulb, not an HID ballast. Don't Skimp: As one of the most important parts in any HID lighting upgrade; don't skimp out when it comes to your wiring. It doesn't matter how good your ballasts are. how good your bulbs are. If your harness is a piece of crap: when it gives out your headlights are gonezo. The Morimoto HD Relay harness is easily worth the premium price compared to cheaper alternatives. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). Compatible: The HD relay can be used for low beams, high beams, or fog lights on most vehicles. The harness uses industry-standard outputs for compatibility with 99% of ballasts out there, and all of the ones we offer here at our shop. Note, if your vehicle has a can-bus system or a finicky pulsed headlight circuit - check out the Standalone Canbus or Mopar Spec harnesses from Morimoto Fail-Safe: Unlike most generic harnesses out there that rely on a single low-quality relay to power both headlights, the Morimoto Harness utilizes one relay per side- so if one did happen fail, you wouldn't be left completely in the dark. Each 40A relay is completely sealed against the elements using ribbed silicone upper and lower seals, and has an flywheel diode for back-EMF protection. Every other connection harness-wide is sealed with the proper silicone grommets. Live somewhere with weather that regularly sucks? No problem. OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it's wiring protected by abrasion-resistant Techflex mesh sleeving and OEM-style relay cubes held together by a mounting bracket cut from polished stainless - the HD relay will look factory fresh under the hood!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984529776808,"sku":"H20","price":55.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26865.HD_Relay_880.010_02161a9b-4442-40f2-9ebb-a2ba1aef0516.jpg?v=1760021005"},{"product_id":"morimoto-bi-xenon-relay-motocontrol-h4-9003-h60","title":"Morimoto Bi-xenon Relay: MotoControl (H4\/9003)","description":"Reality Check: Customers often ask, Do I really need a harness? Yes! A relay harness is designed to deliver steady voltage to your HID ballasts directly from the car battery. Nobody likes a flickering headlight, so why risk it? Factory headlight outputs are really only designed to power a halogen light bub, not an HID ballast. Under Control: Morimoto makes it easy with the MotoControl H4\/9003 Bi-xenon relay harness. Designed to be completely plug-n-play; it's a seamless solution to keep your low and high beams under control with the original stalk inside the car. Works perfectly with Bi-xenon projector retrofits and Hi\/Lo HID systems. Advanced: The third generation MotoControl 8-Pin Relay has a tiny built-in capacitor that stores and releases it's charge between mode changes. So even if there's a short gap between the low and high beam signals from your car, your HID's will run smoothly. It's sealed weather-pack connector is new for 2014 and is a major reliability upgrade compared to other bi-xenon harnesses. Universal: This harness is designed to work with both positive and ground switched headlight circuits, making it universally compatible with all vehicles no matter new or old. Plug n Play: The layout of the harness makes it easy to install. With just a few simple connections, even your mom could set this thing up! Wire lengths are long enough to be used in everything from compact cars to SUVs and it's designed to be 100% plug and play (no cutting or splicing needed). OEM Grade: Aside from being ahead of the game from a technical standpoint, the HD relay is also a work of art. With it's wiring protected by abrasion resistant Techflex mesh sleeving and it's extruded aluminum relay shell that's been anodized and laser engraved - the MotoControl Harness will look factory fresh under the hood!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eINPUT TRIGGER: 1x H4\/9003 Male\u003c\/li\u003e\n\u003cli\u003eBALLAST OUTPUTS: 2x 9006 Female\u003c\/li\u003e\n\u003cli\u003eHIGH BEAM OUTPUTS: 2x 9006 Female\u003c\/li\u003e\n\u003cli\u003eGROUNDS: 2x Nickel-Plated Ring-Type\u003c\/li\u003e\n\u003cli\u003e12V POWER: 1x Nickel-Plated Ring-Type\u003c\/li\u003e\n\u003cli\u003eFUSE: Inline 25A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eWiring: 1x Morimoto H4\/9003 MotoControl Bi-Xenon Relay Harness\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFITMENTS: H4, H4-60\/55W, H4-45W, 9003, 9003LL\u003c\/li\u003e\n\u003cli\u003eSYSTEMS: Bi-Xenon Projectors \u0026amp; Telescoping Hi\/Lo HID Bulbs \u003c\/li\u003e\n\u003cli\u003eHALOGEN BULBS: Not Compatible \u003c\/li\u003e\n\u003cli\u003eOTHER BRANDS: May need High Beam Adapters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984531054760,"sku":"H60","price":51.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33104.MotoControl_BiXenon_H4_9003.010.jpg?v=1759354979"}],"url":"https:\/\/eliteracefab.com\/collections\/light-converters-adapters.oembed","provider":"eliteracefab.com","version":"1.0","type":"link"}