{"title":"Projectors \u0026 Retrofit","description":"\u003cp\u003eA proper headlight retrofit is built from components that work together. This collection covers projector assemblies, bi-xenon and LED projectors, projector shrouds, clear lenses and etched lenses for custom lighting builds. Explore Morimoto retrofit components organized by size, design and compatibility without mixing in complete headlights or ordinary replacement bulbs.\u003c\/p\u003e","products":[{"product_id":"morimoto-lens-sti-r-ls30","title":"Lens: STi-R","description":"\u003cp\u003eHeavy Hitter: Using the JDM Subaru STi projector lens as our performance benchmark for 3\" Koito Bi-xenon Projectors, we were able to bring that hard-to-find performance to the masses with Morimoto 100% optically clear STi-R lenses. Hard to Beat: When using these Morimoto projector lenses on the family of 27mm focus Koito bi-xenon projectors listed in the compatibility section below - the aesthetic appeal and raw performance of your retrofit will be hard to beat. Jap-Spec: It is very common for many modern Toyota, Lexus, Scion, Subaru, Nissan, and Mazda vehicles with 2.5\" factory projectors to come with the projector that's compatible with the STi-R Clear Lens. If you're unsure, feel free to ask! (H7, H11, D2S, and D4S are all common bulb sizes in these projectors) No Brainer: Adding the STi-R Clear Lens to your OEM headlights or projector retrofit with OEM projectors should be a \"no-brainer\". Not only are they an inexpensive upgrade, but these Morimoto projector lenses allow the projectors to perform to their maximum potential in every aspect. Size Matters: When picking out a pair of clear lenses, such as the STi-R Clear Lens, it's not about which model is \"best\" - it's about compatibility. The diameter AND focus height of the lens are both very important.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983487328424,"sku":"LS30","price":28.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26816.3_STiR.010_5163914b-a412-466a-bd70-623ab4266d0b.jpg?v=1759782878"},{"product_id":"morimoto-rq-hardware-valeo-bi-xenon-projector-rq152","title":"RQ Hardware: Valeo Bi-xenon Projector","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983525961896,"sku":"RQ152","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_7501e43f-e417-4fd3-b58a-6f5761f8d408.jpg?v=1759784847"},{"product_id":"morimoto-apollo-2-0-full-circle-projector-shroud-s110","title":"Apollo 2.0 Full Circle Projector Shroud","description":"\u003cp\u003eApollo 2.0: launches with clean lines, smooth contours, and a design that works really well with our amazingly bright 110mm LED halos. Bring the exotic design from modern Porsche headlights home with these fresh shrouds. The Apollo 2.0's have a beautiful smooth chrome finish that is accented by textured face for a unique and attractive look. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983532810408,"sku":"S110","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26823.Apollo_2.010_8acd90a9-6502-41bf-a43c-8015c08b25b5.jpg?v=1759785210"},{"product_id":"morimoto-supercharged-drivers-lf2-506-series-set-lf2-drvsc12","title":"Morimoto LF2-DRVSC12 Supercharged LED Drivers – XB Evo \/ XB Evo Hybrid","description":"\u003cp data-start=\"546\" data-end=\"894\"\u003eThe \u003cstrong data-start=\"550\" data-end=\"599\"\u003eMorimoto LF2-DRVSC12 Supercharged LED Drivers\u003c\/strong\u003e are designed for drivers who want maximum light output from their Morimoto XB Evo or XB Evo Hybrid headlights. These bolt-on drivers replace the factory DOT-spec drivers and increase both low and high beam brightness by 30–50%, making them ideal for off-road and low-visibility use.\u003c\/p\u003e\n\u003cp data-start=\"896\" data-end=\"1251\"\u003eInstallation is simple and fully plug-and-play, with no cutting or wiring required. Output remains within safe operating limits of the LEDs, ensuring reliability while delivering noticeably stronger performance. When installed on XB Evo Hybrid headlights, these drivers also activate the projector and DRL welcome sequence for added visual impact.\u003c\/p\u003e\n\u003cblockquote data-start=\"1253\" data-end=\"1353\"\u003e\n\u003cp data-start=\"1255\" data-end=\"1353\"\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e These drivers are not DOT-compliant and are intended for off-road use only.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003cp data-start=\"1255\" data-end=\"1353\"\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"1360\" data-end=\"1391\"\u003e\u003cstrong data-start=\"1364\" data-end=\"1391\"\u003eKey Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1394\" data-end=\"1454\"\u003e\n\u003cstrong data-start=\"1394\" data-end=\"1426\"\u003e30–50% Light Output Increase\u003c\/strong\u003e over standard DOT drivers\u003c\/li\u003e\n\u003cli data-start=\"1457\" data-end=\"1524\"\u003e\n\u003cstrong data-start=\"1457\" data-end=\"1476\"\u003eBolt-On Upgrade\u003c\/strong\u003e – direct replacement, no wiring modifications\u003c\/li\u003e\n\u003cli data-start=\"1527\" data-end=\"1587\"\u003e\n\u003cstrong data-start=\"1527\" data-end=\"1552\"\u003eLow \u0026amp; High Beam Boost\u003c\/strong\u003e for improved off-road visibility\u003c\/li\u003e\n\u003cli data-start=\"1590\" data-end=\"1644\"\u003e\n\u003cstrong data-start=\"1590\" data-end=\"1621\"\u003eWelcome Sequence Activation\u003c\/strong\u003e (XB Evo Hybrid only)\u003c\/li\u003e\n\u003cli data-start=\"1647\" data-end=\"1703\"\u003e\n\u003cstrong data-start=\"1647\" data-end=\"1672\"\u003eStatus Indicator LEDs\u003c\/strong\u003e for quick system diagnostics\u003c\/li\u003e\n\u003cli data-start=\"1706\" data-end=\"1763\"\u003e\n\u003cstrong data-start=\"1706\" data-end=\"1730\"\u003eSafe Operating Power\u003c\/strong\u003e – no reduction in LED lifespan\u003c\/li\u003e\n\u003cli data-start=\"1766\" data-end=\"1796\"\u003e\u003cstrong data-start=\"1766\" data-end=\"1794\"\u003e5-Year Morimoto Warranty\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"1803\" data-end=\"1826\"\u003e\u003cstrong data-start=\"1807\" data-end=\"1826\"\u003eWhat’s Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1829\" data-end=\"1868\"\u003e(2) Supercharged LED Drivers (1 Pair)\u003c\/li\u003e\n\u003cli data-start=\"1871\" data-end=\"1892\"\u003e(8) Mounting Screws\u003c\/li\u003e\n\u003cli data-start=\"1895\" data-end=\"1925\"\u003e(1) Packet of Thermal Grease\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"1932\" data-end=\"1964\"\u003e\u003cstrong data-start=\"1936\" data-end=\"1964\"\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1967\" data-end=\"1995\"\u003e\n\u003cstrong data-start=\"1967\" data-end=\"1984\"\u003ePower Rating:\u003c\/strong\u003e 1,500 mA\u003c\/li\u003e\n\u003cli data-start=\"1998\" data-end=\"2028\"\u003e\n\u003cstrong data-start=\"1998\" data-end=\"2018\"\u003eOutput Increase:\u003c\/strong\u003e +30–50%\u003c\/li\u003e\n\u003cli data-start=\"2031\" data-end=\"2055\"\u003e\u003cstrong data-start=\"2031\" data-end=\"2053\"\u003eStatus Indicators:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"2060\" data-end=\"2088\"\u003eRed – DRL \/ Ignition Power\u003c\/li\u003e\n\u003cli data-start=\"2093\" data-end=\"2117\"\u003eGreen – Low Beam Power\u003c\/li\u003e\n\u003cli data-start=\"2122\" data-end=\"2146\"\u003eBlue – High Beam Power\u003c\/li\u003e\n\u003cli data-start=\"2149\" data-end=\"2212\"\u003e\n\u003cstrong data-start=\"2149\" data-end=\"2168\"\u003eConnector Type:\u003c\/strong\u003e Morimoto XB Evo \/ XB Evo Hybrid Multi-Pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"2219\" data-end=\"2234\"\u003e\u003cstrong data-start=\"2223\" data-end=\"2234\"\u003eFitment\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"2235\" data-end=\"2330\"\u003e\n\u003cli data-start=\"2235\" data-end=\"2278\"\u003e\n\u003cp data-start=\"2237\" data-end=\"2278\"\u003e\u003cstrong data-start=\"2237\" data-end=\"2268\"\u003eMorimoto XB Evo Headlights:\u003c\/strong\u003e LF2-506\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2279\" data-end=\"2330\"\u003e\n\u003cp data-start=\"2281\" data-end=\"2330\"\u003e\u003cstrong data-start=\"2281\" data-end=\"2319\"\u003eMorimoto XB Evo Hybrid Headlights:\u003c\/strong\u003e LF2-506Y\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2332\" data-end=\"2394\"\u003e⚠ \u003cstrong data-start=\"2334\" data-end=\"2394\"\u003eNot compatible with any other Morimoto or OEM headlights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"2332\" data-end=\"2394\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"2332\" data-end=\"2394\"\u003e \u003c\/p\u003e\n\u003ch3 data-start=\"2401\" data-end=\"2427\"\u003e\u003cstrong data-start=\"2405\" data-end=\"2427\"\u003eCompliance \u0026amp; Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"2430\" data-end=\"2464\"\u003e\u003cstrong data-start=\"2430\" data-end=\"2462\"\u003eNot DOT \/ FMVSS108 compliant\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"2467\" data-end=\"2514\"\u003e\n\u003cstrong data-start=\"2467\" data-end=\"2492\"\u003eFor off-road use only\u003c\/strong\u003e in the USA \u0026amp; Canada\u003c\/li\u003e\n\u003cli data-start=\"2517\" data-end=\"2584\"\u003eIntensity cannot be reduced without reinstalling standard drivers\u003c\/li\u003e\n\u003cli data-start=\"2587\" data-end=\"2649\"\u003eDesigned for North American Morimoto headlight housings only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983534022824,"sku":"LF2-DRVSC12","price":152.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/151617.LF2DRVSC12.010_eeb59527-8636-4741-b4be-2fcf316b539c.jpg?v=1759785245"},{"product_id":"morimoto-apollo-2-0-flat-projector-shroud-s120","title":"Apollo 2.0 Flat Projector Shroud","description":"\u003cp\u003eApollo 2.0: launches with clean lines, smooth contours, and a design that works really well with our amazingly bright 110mm LED halos. Bring the exotic design from modern Porsche headlights home with these fresh shrouds. The Apollo 2.0's have a beautiful smooth chrome finish that is accented by textured face for a unique and attractive look. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983534842024,"sku":"S120","price":17.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26823.Apollo_2.010.jpg?v=1759785275"},{"product_id":"morimoto-rq-hardware-dodge-ram-d2s-5-0-rq101","title":"RQ Hardware: Dodge Ram (D2S 5.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983537823912,"sku":"RQ101","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010.jpg?v=1759785352"},{"product_id":"morimoto-rq-hardware-e46-zkw-projectors-d2s-4-0-rq153","title":"RQ Hardware: E46\/ZKW Projectors (D2S 4.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983537922216,"sku":"RQ153","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_1f3d1fff-c9d6-45cd-bc6e-13927083b0e0.jpg?v=1759785355"},{"product_id":"morimoto-apollo-3-0-projector-shroud-s130","title":"Apollo 3.0 Projector Shroud","description":"\u003cp\u003eApollo 3.0: Fresh off the injection press! The Apollo 3.0 is the third Porsche inspired Morimoto projector shroud to join the Apollo family. With excellent projector coverage, great looks, and perfect integration with our 110mm LED halos, they're already a hit! With a smooth chrome finish that accents its multi-facet design well, the Apollo 3.0 fits well in a wide variety of retrofits on vehicles with round reflectors. Whether you're working on a car or a truck with big headlights, consider the Apollo 3.0 as a solid choice. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto projector shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plan. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your Morimoto projector shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These Morimoto projector shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector or fit within the geometry of your headlight housing, it's normal. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983540248744,"sku":"S130","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26826.Apollo_3.010_17cae14f-5ceb-4be0-b07c-095f93103971.jpg?v=1759785391"},{"product_id":"morimoto-lens-mazda3-ls50","title":"Lens: Mazda3","description":"\u003cp\u003eOld School: Back in the day we used to have these very same lenses in stock as a regular item. Due to popular demand, these have returned to the shelves for all the boys and girls needing them for supreme night time performance. #vintage. Mazda 3s and Sonatas: Coincidentally, these lenses work on the 1st-gen Mazda 3 (OEM HID or OEM Halogen, both compatible!) and the 2010-2014 Hyundai Sonata stock projectors. While a retrofit on either vehicle is almost impossible to pull off, a clear lens swap is a sure fire way to improve your lighting. No Brainer: Adding a set of clear lenses to your OEM headlights or projector retrofit with OEM projectors should be a \"no-brainer\". Not only are they an inexpensive upgrade, but they allow the projectors to perform to their maximum potential in every aspect. Size Matters: When picking out a pair of clear lenses, it's not about which model is \"best\" - it's about compatibility. The diameter AND focus height of the lens are both very important.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983555190952,"sku":"LS50","price":28.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26811.3_Mazda_3_Sonata.010_98a292cc-d914-4524-9d67-22e45b558918.jpg?v=1759786131"},{"product_id":"morimoto-rq-hardware-mazda6-tt-mini-h1-7-0-rq90","title":"RQ Hardware: Mazda6 \/ TT (Mini H1 7.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983556010152,"sku":"RQ90","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_0cd86728-8039-4fae-8f63-c2b26870c373.jpg?v=1759786134"},{"product_id":"morimoto-rq-hardware-subaru-legacy-mini-h1-7-0-rq130","title":"RQ Hardware: Subaru Legacy (Mini H1 7.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983556108456,"sku":"RQ130","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_fe7fb913-8775-461d-b429-53fb3b1874a6.jpg?v=1759786159"},{"product_id":"morimoto-rq-hardware-camry-frs-mini-h1-7-0-rq30","title":"RQ Hardware: Camry \/ FRS (Mini H1 7.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983556796584,"sku":"RQ30","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_c9512e5a-ed4b-45f9-8f4e-1c0d98caf431.jpg?v=1759786162"},{"product_id":"morimoto-rq-hardware-bmw-e36-fx-r-2-5-rq40","title":"RQ Hardware: BMW E36 (FX-R 2.5)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983564398760,"sku":"RQ40","price":24.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_7546f0f3-8b67-4c5d-ad3c-4ccfe66680cf.jpg?v=1759786588"},{"product_id":"morimoto-bi-xenon-evox-r-2-0-lhd-pr140","title":"Bi-Xenon: EvoX-R 2.0 (LHD)","description":"\u003cp\u003eEvolution: The original Hella \"E55\" design is the most widely used original equipment projector in the world. So what? It's a good design, but the Morimoto EvoX-R 2.0 is better in every way. So whether it's a new retrofit or a direct swap out for the old; the Morimoto EvoX-R 2.0 is a winner. All-Rounder: Morimoto's EvoX-R 2.0 is derived from the Mitsubishi Lancer Evo X Original Equipment design. It's the best option for upgrading cars that came with older 3\" Hella bi-xenon HID projectors and it's also ideally shaped for a traditional retrofit too. 2.0 Performance: Coming standard with a 3\" clear lens and a mirror finish reflector bowl, the Morimoto EvoX-R 2.0 manages to produce the MOST INTENSE hot spot of any projector in the Morimoto lineup. If you're looking for the most hardcore down-the-road performer, look no further. Performance like this is not possible with threaded-shaft style projectors! Cross Compatible: Their bolt pattern is identical to older Hella 3\" halogen, xenon, and bi-xenon HID projectors - so can be used as a direct bolt on upgrade in many OEM or aftermarket housings that use these designs. The bulb holders are also compatible with D1S, D2S, and D3S bulbs.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53983574524072,"sku":"PR140","price":65.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27275.BiXenon_Morimoto_EvoXR_2.010_00b3b554-402b-4841-9662-2abc192b9df0.jpg?v=1759786629"},{"product_id":"morimoto-bi-xenon-mini-d2s-5-0-round-lens-lhd-pr56","title":"Bi-Xenon: Mini D2S 5.0: (Round Lens\/LHD)","description":"\u003cp\u003eHigh Five! Morimoto has officially achieved Projector-Perfection with the 5th gen Mini D2S Bi-xenons! If you're looking for the ultimate beam pattern boner; it's really not going to get any better than this folks. Perfectly balanced beam. The crispiest ECE style cutoff. Unquestionable OEM-quality all packed into a projector that's undeniably easy to install. If we died and went to fog light heaven, the 5.0 would be greeting us at the gate. Projector-Perfection: There are other projectors that produce brighter hot spots. There are other projectors that have unholy amounts of width.But no other option creates the perfect balance of width \u0026amp; hotspot lux (aka distance) quite like the 5.0. In order to create the ultimate weapon for driving in the dark; Morimoto baked in best practices from a variety of well-respected OEM and aftermarket projectors. With over a decade of experience, we trust that their latest and greatest equates to the perfect all-around perfomer. Distance: The hot spot on the new 5.0 bi-xenon is roughly 70% brighter than the already-impressive 4.0 design. While the high beam unloads a lot more volume of light; virtually no additional intensity has been reserved. What that means: You get the maximum benefit from your bulbs \u0026amp; ballasts in default mode--where drivers spend 99% of their time. The controlled decrease in intensity from the hyper-hotspot down through the foreground results in a distribution of light that makes driving at night very comfortable \u0026amp; safe. Why? Because too much intensity on the ground too close to the front of your vehicle will make your eyes adjust, compromising your ability to see very far. Science! Width: Power is nothing without control, and even the best D2S bulbs and 50w ballasts won't always result in a satisfying output when projected out on the road improperly--so the KEY is really how that light is deployed. Thanks to the beauty in the center of this beast [all new optics package + flat cast cutoff shield] You really end up with a beam pattern that's extremely wide and flat, with zero bowing. But that's not all: The position of the shield has been fine-tuned so that there is a band of intense light that spans side-to-side directly under the cutoff line. RX350 Bi-xenons, S2000's, LS430s, SC430--all of the best from Koito now need to bite their tongue, because that's all they had on Morimoto prior to the 5.0 party! Anti-Reflective Coating Lens: The blue tint to the lens is more than marketing fluff too. That's an AR coating, and it serves a real purpose. AR coatings increase the transmission of light through the glass all while decreasing bleed. The result? 10% more light and less glare compared to a traditional clear lens. The blue-hue may not be for everybody, but in this case we're down. Hardware Upgrades: Forget the finicky 2 piece bulb holders found on the 4.0s, these come standard with the MotoHolders: an all-new one-piece design that's far easier to work with. The new CNC machined aluminum lock rings are not only pretty looking, but they're 300% stronger than the old die cast part. To tighten them, Morimoto now offers an optional lock-ring tightening tool that works with any 10mm socket set. Torx screws now hold the lens holder on too instead of Philips screws. While the 5.0 get's a big boost in the performance department, it's also clear they've paid attention to the details in the parts department too. We like it! Installation Summary: On a H4-based fog light reflector for example... Remove the fog light lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the fog lights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it! Check out the installation procedure linked above.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984468762792,"sku":"PR56","price":92.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27284.BiXenon_Morimoto_Mini_D2S_5.010_28cca52e-2b74-4993-82a7-b437fc192d58.jpg?v=1760019100"},{"product_id":"morimoto-panamera-2-0-projector-shroud-white-amber-led-switchback-s262","title":"Panamera 2.0 Projector Shroud (White\/Amber LED Switchback)","description":"\u003cp\u003ePanamera-LED: The original Panamera switchback shrouds were an instant success. Inspired by modern Porsche headlights, the 2.0 keeps the model current with the latest design language from Porsche - making them even edgier than before. While the aesthetic is different, the performance is unchanged. But make no mistake, with their Morimoto XSB powered Type II switchback drivers \u0026amp; LEDs, they illuminate the 4 corners with mad intensity. Undoubtedly the most baller status shrouds we've ever offered. With excellent coverage for most projectors too, they're also very functional. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto Panamera LED's use an XSB Switchback driver and high quality LED PCB in place of the cheap crap found in the generics. Their shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting: Centric rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (Switchback) and Prism (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ-Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984469450920,"sku":"S262","price":33.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27338.Panamera_Switchback_LED_2.010_adfe245c-6d5b-4bc8-952d-7a3d54fc811e.jpg?v=1760019120"},{"product_id":"morimoto-mini-gatling-gun-projector-shroud-black-s11","title":"Morimoto Mini Gatling Gun Projector Shroud (Black)","description":"Mini Gatling Gun: The Mini Gatling Gun is a smaller version of the popular Gatling Gun design, made for use exclusively with the Morimoto Mini H1 bi-xenon projectors. Since it won't fit anything else, they're automatically included with those projectors by default. The chrome mini gats have been a staple in our catalog forever, and now by popular demand - a beautiful piano black version for the taking! In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable painted finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their finish easily flakes off. Mounting: could not be any easier with the Mini Gatling Gun shrouds. Four internal posts line up to the bolt pattern on the mid-section of any generation Morimoto Mini H1 projector, so they'll bolt right up! LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 92mm DIA, 52mm D\u003c\/li\u003e\n\u003cli\u003eFinish: Gloss Black Paint\u003c\/li\u003e\n\u003cli\u003eHalo Size: 70mm (Front)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eShroud: 1x Gloss Black Mini Gatling Gun Projector Shroud\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMORIMOTO PROJECTORS: Mini H1 (All Generations)\u003c\/li\u003e\n\u003cli\u003eACME PROJECTORS: Standard H1, Super H1\u003c\/li\u003e\n\u003cli\u003eOEM PROJECTORS: None\u003c\/li\u003e\n\u003cli\u003eMOUNTS WITH: Screws (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984470433960,"sku":"S11","price":11.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27334.Mini_Gatling_Gun_Black_Series.010.jpg?v=1759354250"},{"product_id":"morimoto-apollo-2-0-flat-projector-shroud-black-s121","title":"Apollo 2.0 Flat Projector Shroud (Black)","description":"\u003cp\u003eApollo 2.0: With clean lines, smooth contours, and a design that works really well with our amazingly bright 110mm LED halos. Bring the exotic design from modern Porsche headlights home with these fresh shrouds. The Apollo 2.0's have a beautiful piano black finish that is accented by textured face for a unique and attractive look. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The all new Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with Ez Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984470565032,"sku":"S121","price":13.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27330.Apollo_2_Black_Series.010_e0368f4e-5f0e-4103-93f6-81cf5b4f569b.jpg?v=1760019151"},{"product_id":"morimoto-apollo-3-0-projector-shroud-black-s131","title":"Apollo 3.0 Projector Shroud (Black)","description":"\u003cp\u003eApollo 3.0: Fresh off the injection press! the Apollo 3.0 is the third Porsche inspired shroud to join the Apollo family. With excellent projector coverage, great looks, and perfect integration with our 110mm LED halos, they're already a hit! Now available with a stellar piano black finish that accents its design, the Apollo 3.0 fits well in a wide variety of retrofits on vehicles with round reflectors. Whether you're working on a car or a truck with big headlights, consider the Apollo 3.0 as a solid choice. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable painted finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their coating easily flakes off. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984471220392,"sku":"S131","price":14.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27331.Apollo_3_Black_Series.010_b31dcd45-5118-4937-8773-affeb09d2962.jpg?v=1760019169"},{"product_id":"morimoto-rq-hardware-dodge-ram-d2s-5-0-rq105","title":"RQ Hardware: Dodge Ram (D2S 5.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984471384232,"sku":"RQ105","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_fb637de2-05cb-4555-a7c8-7d9d43865349.jpg?v=1760019188"},{"product_id":"morimoto-rq-hardware-hella-e55-evox-r-d2s-4-0-rq103","title":"RQ Hardware: Hella E55 \/ EvoX-R (D2S 4.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984472596648,"sku":"RQ103","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_1e342342-5c25-403d-84e2-8a381b1b2dcd.jpg?v=1760019222"},{"product_id":"morimoto-rq-hardware-toyota-4runner-14-20-mled-rq104","title":"RQ Hardware: Toyota 4Runner (14-20) (MLED)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984474103976,"sku":"RQ104","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_af355aab-4a07-42e9-9547-8817c631c0ee.jpg?v=1760019280"},{"product_id":"morimoto-gti-r-2-0-projector-shroud-s370","title":"GTI-R 2.0 Projector Shroud","description":"\u003cp\u003eGTi-R 2.0: The Mk6 GTI brought us many treats, this unique \"eyelid\" shroud design included! Want OEM+? Here you are! In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984476954792,"sku":"S370","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26838.GTiR_2.010_59e3af3e-b8c8-43e7-a1e2-596a992d10a1.jpg?v=1760019411"},{"product_id":"morimoto-projector-shroud-centric-rings-mini-h1-s60","title":"Projector Shroud Centric Rings: Mini H1","description":"\u003cp\u003ePriceless: These allow use of the most common shrouds with 3\" openings to fit a 2.5\" projector beautifully. Installation: Snaps into the circular flange on the backside of the shrouds, and fits tight over the front lens frame of the projectors for a perfect fit. NOTE: We do recommend adding epoxy\/silicone in between surfaces to ensure vibration never shakes them loose. Yes their friction-fit is tight, but better safe than sorry! NOTE: Will not fit E46-R or Gatling Gun 2.0 shrouds without modification. Free: Included at no charge when you order both premium shrouds and a set of compatible projectors from our shop for simple, instant, and effective mounting.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984484065448,"sku":"S60","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26806.Shroud_Centric_Rings.010_982163b7-7206-4a9f-9408-d31f10580d1d.jpg?v=1760019670"},{"product_id":"morimoto-panamera-projector-shroud-insert-profile-pixel-rgb-s263","title":"Panamera Projector Shroud Insert: Profile Pixel (RGB)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to upgraded LED DRL Boards, their new tech and it's features make it a no brainer! Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old; Profile is working hand-in-hand with the industry's experts to produce products with the performance and features that we all expect. Our customers are loving the new Pixel Panamera Insert Boards that they're cranking out, and here's why! RGBWA: With their powerful RGBW LEDs, The Profile Pixel Panamera inserts are capable of producing an amazingly clear neutral white, a pure amber, and every other color in the spectrum for that matter.. Reds, blues, greens, teals, purples, pinks... you name it! The system is designed to run in white mode until you activate the RGB system through your app controller, at which point you can tune their color exactly to your liking. Turn the RGB system off, and they'll automatically default back to white to keep you street legal. All that aside, and these things are just plain bright... easily outshining the factory LED setup. Pixel = Perfection! Switchback: Profile's specially designed drivers have a separate input wire for your turn signal circuit. When triggered, the LED driver will automatically interrupt the RGB\/white mode and flash the integrated amber LED chips for a modern switchback turn signal in your DRL position. When the turn signal stops, the RGB or white mode will automatically return to its previous setting. Functional Remote Control: First-time users will need to purchase an optional RGBW Controller. The Morimoto XBT is required for the Pixel DRL boards, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984488816808,"sku":"S263","price":37.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27152.Profile_Pixel_Panamera_Inserts_RGBW.010_cc8d46e2-ffdb-4949-9429-54644894958b.jpg?v=1760019819"},{"product_id":"morimoto-square-ocular-projector-shroud-s310","title":"Square: Ocular Projector Shroud","description":"\u003cp\u003eOcular Square: The Ocular Square comes in smooth, with its basic lines it's easy on the eyes and adds to the appeal on any X Lens retrofit with it's good coverage. Clean design incorporates smooth chrome and a dimpled finish into a great looking bezel that's extremely versatile due to its wide coverage and minimal depth. It's just enough without getting in the way. NOTE: The Square Ocular fits only the Morimoto Mini D2S 5.0 with the \"Square Lens\" option. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting: JB Quik Weld is recommended in order to prevent the shrouds from vibrating loose over time. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with an EZ-Lock cutting wheel to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984501596328,"sku":"S310","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26846.Square_Ocular.010_be6b2ac0-85ba-4538-8895-c5cd45328f7c.jpg?v=1760020151"},{"product_id":"morimoto-lock-ring-tool-mini-d2s-5-0-sp34","title":"Lock Ring Tool: Mini D2S 5.0","description":"\u003cp\u003eThe Morimoto Mini D2S 5.0: Is the best Bi-xenon projector for retrofitting headlights for more reasons than the fact that it's light output is superior. The ease of installation makes it even better, and all retrofitters know thathaving the right tools is key to a job well done. The Lock Ring: Itself is an anodized aluminum piece, made of CNC machined material. Versus the common die cast lock rings out there, this one is much stronger, and looks better. It also has grips to tighten by hand, and of course, slots to tighten using the lock ring tool --also available here. Lock Ring Tool: This tool is designed to apply more than enough twist to your lock rings when you're finally ready to clamp down and finish your retrofit. It is compatible with all 10mm socket wrenches, and of course Morimoto's blue anodized D2S 5.0 lock rings. Be Careful: This tool will allow you to tighten the lock ring so much that you can break your headlight reflector in half or crack it. Use a sensible amount of force, and finish the job with some JB weld to ensure nothing ever vibrates itself loose in the long run. Now get to work!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984503562408,"sku":"SP34","price":12.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33363.Morimoto_Mini_D2S_5_Lock_Ring_Tool.010_b2510466-7473-4591-9425-1ba3f3e561d7.png?v=1760020183"},{"product_id":"morimoto-g37c-r-projector-shroud-s200","title":"G37C-R Projector Shroud","description":"\u003cp\u003eG37C-R: A fully circular shroud with a large overall diameter perfect for filling out reflectors in bigger headlights. Inspired by the OEM Infiniti G37 Coupe Headlight. Following in the footsteps of many newer shroud designs, the G37C-R uses a two piece chromed plastic and acrylic internal diffuser that will glow when the light is turned on. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL \"eyelets\" that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984509001896,"sku":"S200","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26832.G37CR.010_02e3a2cf-a879-47ab-ad4f-90c2fcd7df29.jpg?v=1760020362"},{"product_id":"morimoto-square-panasquare-projector-shroud-s270","title":"Square: PanaSquare Projector Shroud","description":"\u003cp\u003ePanaSquare: The Panamera is one of the most popular round shrouds, but now the PanaSquare is available to fit Square Lens Retrofits! Using symmetrical semi-circular acrylic accents on each face of the shroud, the PanaSquare is one of the coolest and cleanest looking shrouds for their Square Lens friends. NOTE: The PanaSquare fits only the Morimoto Mini D2S 4.0 or 5.0 with the \"Square Lens\" option. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: our shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting: JB Quik Weld or another fast-curing epoxy is recommended in order to prevent the shrouds from vibrating loose over time. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984509132968,"sku":"S270","price":11.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33115.Square_PanaSquare.010_6384283a-4224-4bb2-b603-3793dade4152.jpg?v=1760020388"},{"product_id":"morimoto-lock-ring-mini-d2s-5-0-blue-sp36","title":"Lock Ring: Mini D2S 5.0 (Blue)","description":"\u003cp\u003eThe Morimoto Mini D2S 5.0: Is the best Bi-xenon projector for retrofitting headlights for more reasons than the fact that it's light output is superior. The ease of installation makes it even better, and all retrofitters know thathaving the right tools is key to a job well done. The Lock Ring: Itself is an anodized aluminum piece, made of CNC machined material. Versus the common die cast lock rings out there, this one is much stronger, and looks better. It also has grips to tighten by hand, and of course, slots to tighten using the lock ring tool --also available here. Lock Ring Tool: This tool is designed to apply more than enough twist to your lock rings when you're finally ready to clamp down and finish your retrofit. It is compatible with all 10mm socket wrenches, and of course Morimoto's blue anodized D2S 5.0 lock rings. Be Careful: This tool will allow you to tighten the lock ring so much that you can break your headlight reflector in half or crack it. Use a sensible amount of force, and finish the job with some JB weld to ensure nothing ever vibrates itself loose in the long run. Now get to work!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984509952168,"sku":"SP36","price":6.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33363.Morimoto_Mini_D2S_5_Lock_Ring_Tool.010.png?v=1760020407"},{"product_id":"morimoto-mini-gatling-gun-projector-shroud-s10","title":"Morimoto Mini Gatling Gun Projector Shroud","description":"Mini Gatling Gun: The Mini Gatling Gun is a smaller version of the popular Gatling Gun design, made for use exclusively with the Morimoto Mini H1 bi-xenon projectors. Since it won't fit anything else, they're automatically included with those projectors by default. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: could not be any easier with the Mini Gatling Gun shrouds. Four internal posts line up to the bolt pattern on the mid-section of any generation Morimoto Mini H1 projector, so they'll bolt right up! LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Prism (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the \"In Action\" images section above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 92mm DIA, 52mm D\u003c\/li\u003e\n\u003cli\u003eFinish: Forever Finish Chrome\u003c\/li\u003e\n\u003cli\u003eHalo Size: 70mm (Front)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eShroud: 1x Mini Gatling Gun Projector Shroud\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMORIMOTO PROJECTORS: Mini H1 (All Generations)\u003c\/li\u003e\n\u003cli\u003eACME PROJECTORS: Standard H1, Super H1\u003c\/li\u003e\n\u003cli\u003eOEM PROJECTORS: None\u003c\/li\u003e\n\u003cli\u003eMOUNTS WITH: Screws (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984517128360,"sku":"S10","price":9.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26841.Mini_Gatling_Gun.010.jpg?v=1759354870"},{"product_id":"morimoto-turbine-set-s340","title":"Turbine (Set)","description":"\u003cp\u003eFull Size Turbine: The Mini Turbine was an immediate hit when we saw it, but it didn't fit every projector. Enter the bigger, badder full-size Turbine shrouds! Complete with internal acrylic diffuser and halo tray, this one's a winner in our books!  In Comparison:  Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheap-o's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting:  Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time.  LED Halos:  Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the \"In Action\" images section below. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside.  Trimming:  Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984518242472,"sku":"S340","price":42.5,"currency_code":"USD","in_stock":true}]},{"product_id":"morimoto-3easy-projector-shroud-s400","title":"3Easy Projector Shroud","description":"\u003cp\u003e3Easy: Lets start with the facts, there is nothing exciting about the design of this shroud. It's chrome. Its smooth. It+D1731s got no texture. No visual interest. No vents or holes for halos. It is the most utilitarian shroud known to retrofitting mankind, it's small, fit's in the tightest of spaces, and it's absolutely perfect [for that!] 3 Inch Projectors: If you've made the choice to shove a bigger projector with a 3 inch lens into something like your high beam reflector, and the projector just takes up all the available space to the point where no other shroud will fit -- BOOM, that's where these come in handy. 99% of the time, these will be used in quad retrofits where the high beam position is way tight. Keep it tight: They sit nice and tight on a Morimoto Mini D2S 5.0 Bixenon projector, which is really what they were designed for. There is just a tiny vent on top for air flow, and a cutout on the bottom to just barely let the Bi-xenon solenoid poke through. Otherwise, they'll cover up the entire front half of the projector very well and add minimal extra size to the overall package. Mounting: These will press-fit directly onto the lens holder of a D2S 5.0 projector, no centric ring needed. You could use a centric ring to mount these on something smaller like a Mini H1, but there's really no point since the Mini Gatling Gun shroud is even smaller. . If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984519553192,"sku":"S400","price":15.3,"currency_code":"USD","in_stock":true}]},{"product_id":"morimoto-mini-graphite-projector-shroud-s20","title":"Morimoto Mini Graphite Projector Shroud","description":"Mini Graphite: One of the available \"standard\" options for the Morimoto Mini H1 bi-xenon projectors, these unique looking shrouds are composed of translucent smoked gray plastic that glows when the lights are on. Since it wont fit anything else, the Mini Graphite shrouds are a no-cost option with the Morimoto Mini H1 projectors. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature a unique smoked translucent plastic that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 88mm H, 100mm W, 59mm D\u003c\/li\u003e\n\u003cli\u003eFinish: Smoked Translucent\u003c\/li\u003e\n\u003cli\u003eHalo Size: 80mm (Front or Internal)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eShroud: 1x Mini Graphite Projector Shroud\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMORIMOTO PROJECTORS: Mini H1 (All Generations)\u003c\/li\u003e\n\u003cli\u003eACME PROJECTORS: Standard H1 or Super H1\u003c\/li\u003e\n\u003cli\u003eLENS DIAMETERS: 2.5in Only\u003c\/li\u003e\n\u003cli\u003eMOUNTS WITH: Centric Rings and\/or JB Quik Weld\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984519651496,"sku":"S20","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26842.Mini_Graphite.010.jpg?v=1759354890"},{"product_id":"morimoto-bi-led-m-led-2-0-lhd-pr352","title":"Bi-LED: M LED 2.0 (LHD)","description":"\u003cp\u003eIt's 2.0 Clock At our shop we love good old HID-powered projectors more than Kanye loves Kanye... BUT... .Truth be told, The new M LED 2.0 is the best Bi-LED projector in the retrofitting world. At the same time, it's better than any Bi-xenon. Put simply it's hard not to like the new M LED 2.0. The performance unparalleled. The simplicity is sublime. The ease of installation is excellent. The instant on is awesome. The original M LED was great when it came out, but by today's standards it's no longer on the leaderboard. Now it's two-point-o time! Output Advantage: We'll just start with the hotspot. It's brighter than a D2S 5.0 with a CBI and 50w ballast, and 10% brighter than it's closest LED based competitor. The Kuria optic clear lens and koito-esque beam shaper produce a beam pattern that's way wider than a D2S 5.0 too. Their ECE-sloped beam pattern is super sharp and colorful. You can expect up to 83,000 peak CD--that is a lot of light. Distribution: Width and intensity are common characteristics that are easy to engineer and explain, but it's important not to downplay the importance of distribution! 80% of the optical engineering hours went into optimizing the way that every last lumen ended up on the road in the name of maximizing visibility both up ahead and off to the sides of the road. Each facet of the M LED 2.0's dual reflector bowl was carefully considered (and re-considered, and re-considered again) to ensure that the results were nothing short of perfection (both by the numbers, and subjectively). Yoshi Ishida, Morimoto's chief engineer, Yoshi Ishida, you nailed it. Easy Install: The threaded mounting shaft has been extended to 27.2mm in length and can be removed from the projector to free up more than an inch of depth for those who don't need\/want it. It comes with a CNC machined lock ring and an optional tool for easy-tightening. H4 alignment-adapter comes standard, but it's easy to setup in any other fog light too. The active-cooling fan is sunk into the heat sink, keeping space to a minimum without sacrificing the ability to stay cool. The wiring is clean, out of the way, and can be disconnected with ease. Simplicity: Forget about separate bulbs. Forget about big ballasts, or where to mount them. Forget about complex relay harnesses, and where to run them. Here, you've got the projector and a small external LED driver to regulate power and control its function. If you're a clutter-phobe, or simply tight on space working on something like a motorcycle: the M LED 2.0 is the way to go. Details: From the weather-tight grommet on the wiring to the blue-anodized lock ring, nothing was left behind. The lens holder looks great, the grille on the reflector bowl is unnecessarily beautiful. The geometry on the vanes on the heat sink were aligned to maximize air-flow and minimize temperatures. The abundance of precise, die-cast and CNC machined parts (rather than stamped) in the entire system makes for a slop-free setup and conveys quality over cost savings. It may be built for retrofitters, but the fit and finish is on-par with any OEM projector. Worth it? If you want the latest and greatest, Then yes. It is. Go for a comparable Bi-xenon setup and you'll need to buy big money bulbs, ballasts, and a relay harness for about the same price. Go for something like the UPS Power Plus Bi-LED \/ Hybrid laser projectors and you'll spend much more and can forget about an easy install. Morimoto's M LED 2.0 projectors may seem expensive on the surface, but you pay for what you get, and all things considered, they've got the most bang for the buck in the business right now .\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984521093288,"sku":"PR352","price":205.7,"currency_code":"USD","in_stock":true}]},{"product_id":"morimoto-bi-led-m-led-2-0-rhd-pr353","title":"Bi-LED: M LED 2.0 (RHD)","description":"\u003cp\u003eIt's 2.0 Clock At our shop we love good old HID-powered projectors more than Kanye loves Kanye... BUT... .Truth be told, The new M LED 2.0 is the best Bi-LED projector in the retrofitting world. At the same time, it's better than any Bi-xenon. Put simply it's hard not to like the new M LED 2.0. The performance unparalleled. The simplicity is sublime. The ease of installation is excellent. The instant on is awesome. The original M LED was great when it came out, but by today's standards it's no longer on the leaderboard. Now it's two-point-o time! Output Advantage: We'll just start with the hotspot. It's brighter than a D2S 5.0 with a CBI and 50w ballast, and 10% brighter than it's closest LED based competitor. The Kuria optic clear lens and koito-esque beam shaper produce a beam pattern that's way wider than a D2S 5.0 too. Their ECE-sloped beam pattern is super sharp and colorful. You can expect up to 83,000 peak CD--that is a lot of light. Distribution: Width and intensity are common characteristics that are easy to engineer and explain, but it's important not to downplay the importance of distribution! 80% of the optical engineering hours went into optimizing the way that every last lumen ended up on the road in the name of maximizing visibility both up ahead and off to the sides of the road. Each facet of the M LED 2.0's dual reflector bowl was carefully considered (and re-considered, and re-considered again) to ensure that the results were nothing short of perfection (both by the numbers, and subjectively). Yoshi Ishida, Morimoto's chief engineer, Yoshi Ishida, you nailed it. Easy Install: The threaded mounting shaft has been extended to 27.2mm in length and can be removed from the projector to free up more than an inch of depth for those who don't need\/want it. It comes with a CNC machined lock ring and an optional tool for easy-tightening. H4 alignment-adapter comes standard, but it's easy to setup in any other fog light too. The active-cooling fan is sunk into the heat sink, keeping space to a minimum without sacrificing the ability to stay cool. The wiring is clean, out of the way, and can be disconnected with ease. Simplicity: Forget about separate bulbs. Forget about big ballasts, or where to mount them. Forget about complex relay harnesses, and where to run them. Here, you've got the projector and a small external LED driver to regulate power and control its function. If you're a clutter-phobe, or simply tight on space working on something like a motorcycle: the M LED 2.0 is the way to go. Details: From the weather-tight grommet on the wiring to the blue-anodized lock ring, nothing was left behind. The lens holder looks great, the grille on the reflector bowl is unnecessarily beautiful. The geometry on the vanes on the heat sink were aligned to maximize air-flow and minimize temperatures. The abundance of precise, die-cast and CNC machined parts (rather than stamped) in the entire system makes for a slop-free setup and conveys quality over cost savings. It may be built for retrofitters, but the fit and finish is on-par with any OEM projector. Worth it? If you want the latest and greatest, Then yes. It is. Go for a comparable Bi-xenon setup and you'll need to buy big money bulbs, ballasts, and a relay harness for about the same price. Go for something like the UPS Power Plus Bi-LED \/ Hybrid laser projectors and you'll spend much more and can forget about an easy install. Morimoto's M LED 2.0 projectors may seem expensive on the surface, but you pay for what you get, and all things considered, they've got the most bang for the buck in the business right now .\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984521846952,"sku":"PR353","price":196.35,"currency_code":"USD","in_stock":true}]},{"product_id":"morimoto-bi-xenon-acme-standard-h1-pr150","title":"Bi-Xenon: ACME Standard (H1)","description":"\u003cp\u003eNo Substitutes: If you don't have LED powered fog lights, then you're just behind the times! Thankfully the new Morimoto Audi fog lights: Look great. Are well-built. Perform like champs. Have a virtually infinite life span. An unbeatable warranty, And best of all you won't need to sell your soul to afford them! Many of the guys here at the shop use them on their own vehicles, and they're easily one of our most popular product lines. Compatible: With many modern applications from Audi, these complete fog light housings will swap directly in place of the original halogen units that they're designed to replace, using all of the stock mounting locations. Their aim can be perfectly dialed in with the integrated height adjusters. Check the compatibility section below for a list of known applications. Plug n Play: Wiring is easy too! The Morimoto XB LED fog light kit is designed to work without any special wiring. They will plug into the factory connectors for the stock fog lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. Powered: By three Nichia 5500K LED's that produce around 1200 raw lumens per side. The projector based optics concentrate a total of 2400 lumens of pure white light into a beam that's super wide and perfectly distributed for use as a fog light. Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. The XB fogs meet \u0026amp; exceed all SAE, DOT, and ECE regulations. Well-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The powder-coated cast aluminum housing is light-weight and much stronger than comparable plastic alternatives. Doubling as the heat-sink for the LED's, the housings completely protect the internals from moisture and road debris. We've sold many thousands of these fog lights and to date, have only seen one or two develop a problem... no joke!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984539574440,"sku":"PR150","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27270.BiXenon_ACME_Standard_H1.010_9e029b2e-17a7-4f76-a7bd-f013f51d9247.jpg?v=1760021515"},{"product_id":"morimoto-micro-gatling-projector-shroud-s70","title":"Morimoto Micro Gatling Projector Shroud","description":"MicroGatling: The Micro Gatling Gun is the smallest version of the popular Gatling Gun design, made for use exclusively with the Morimoto Matchbox bi-xenon projectors, it should also work well on a variety of other OEM Fog Light projectors. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Prism (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTech Specs:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDimensions: 80mm DIA, 36mm D\u003c\/li\u003e\n\u003cli\u003eFinish: Forever Finish Chrome\u003c\/li\u003e\n\u003cli\u003eHalo Size: 60mm (Front)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eShroud: 1x Micro Gatling Projector Shroud\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 Years\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMORIMOTO PROJECTORS: Matchbox 2.0 Only\u003c\/li\u003e\n\u003cli\u003eOEM PROJECTORS: Bosch Mini H1, Lexus H3 Fog\u003c\/li\u003e\n\u003cli\u003eLENS DIAMETERS: 46mm\u003c\/li\u003e\n\u003cli\u003eMOUNTS WITH: Screws (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984545636520,"sku":"S70","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26843.MicroGatling.010.jpg?v=1759355083"},{"product_id":"morimoto-dummy-projector-lens-pr5","title":"Morimoto Dummy: Projector Lens","description":"\u003cp\u003eDummy: Projector Lens\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984546259112,"sku":"PR5","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27655.Dummy_Mini_H1_Projectors.010.jpg?v=1759355080"},{"product_id":"morimoto-panamera-2-0-projector-shroud-black-white-amber-led-switchback-s265","title":"Panamera 2.0 Projector Shroud (Black) (White\/Amber LED Switchback)","description":"\u003cp\u003ePanamera-LED: The original Panamera switchback shrouds were an instant success. Inspired by modern Porsche headlights, the 2.0 keeps the model current with the latest design language from Porsche - making them even edgier than before. While the aesthetic is different, the performance is unchanged. But make no mistake, with their Morimoto XSB powered Type II switchback drivers \u0026amp; LEDs, they illuminate the 4 corners with mad intensity. Undoubtedly the most baller status shrouds we've ever offered. With excellent coverage for most projectors too, they're also very functional. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto Panamera LED's use an XSB Switchback driver and high quality LED PCB in place of the cheap crap found in the generics. Their shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984591708328,"sku":"S265","price":33.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27339.Panamera_Switchback_LED_2_Black_Series.010_84bac162-e310-403d-b4f2-5b0a3572108d.jpg?v=1760024421"},{"product_id":"morimoto-led-high-beam-mini-hb-pr340","title":"LED High Beam: Mini HB","description":"\u003cp\u003eMorimoto: The Automotive Lighting Benchmark. While there's probably nothing wrong with your halogen high beam bulbs, or certainly a retrofitted set of bi-xenon\/Bi-LED projectors, overkill is under-rated, and that's why we're giving two thumbs up to the new Morimoto high beam projector. Well Done: The Morimoto Mini HB projector is a projector designed as a dedicated high beam, and it is stupid bright! It has one job, and it is good at it! Easy Install: The Mini HB features a threaded-shaft style mount on the back that allows the projectors to be locked on with their included hardware, and minimal modifications to your headlight. Best part is that the threaded shaft is about twice as long as what you would normally find on something like a Mini H1 projector, making it even easier to install across the board. Not only that, it includes adapter hardware for most popular bulb sockets (h11, 9005, H7, etc)... Now that's awesome. Shrouds: Conveniently, the Morimoto HB LED LED projectors are compatible with most every existing shroud on the market, even including the \"Mini Series\" - which will screw onto the pre-existing mounting points. They also take all shrouds that work with centric rings too- so you should be able to snap them right onto the bezel on the front face of the Hi-Lens. Wiring Really doesn't get any more simple. These come out of the box with a universal 9005\/9006 male input that will connect directly to the high beam trigger (or splitters) coming from your car. If you have a differently sized OEM high beam bulb, no worries, just pick up an inexpensive adapter (which we also carry)\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984592461992,"sku":"PR340","price":89.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/33118.High_Beam_Morimoto_Mini_HB_LED.010_52fe1e01-01cf-4f36-b7f4-03bbd7089ba7.jpg?v=1760024469"},{"product_id":"morimoto-rq-hardware-spec-d-acme-h1-rq110","title":"RQ Hardware: Spec-D (ACME H1)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984601931944,"sku":"RQ110","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_3905f334-389e-42f5-81b8-a3df5b885ea8.jpg?v=1760024855"},{"product_id":"morimoto-rq-hardware-ford-fusion-mini-h1-7-0-rq50","title":"RQ Hardware: Ford Fusion (Mini H1 7.0)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive. Good Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. Whats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984601997480,"sku":"RQ50","price":25.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27308.Bare_RetroQuik_Brackets_Hardware.010_f4519d07-2deb-4fba-a5af-aea468a5bda5.jpg?v=1760024858"},{"product_id":"morimoto-bullet-projector-shroud-s140","title":"Bullet Projector Shroud","description":"\u003cp\u003eBullet Proof: A conical shaped shroud with smooth lines, excellent coverage, and a perfect fit for many popular 2.5\" and 3\" lens projectors makes the Bullet shroud a \"killer\" choice! In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984604258472,"sku":"S140","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26827.Bullet.010_a71a04e3-b68d-45c8-980b-19cef367e987.jpg?v=1760024917"},{"product_id":"morimoto-iris-projector-shroud-s220","title":"Iris Projector Shroud","description":"\u003cp\u003eIris: As smooth as they come - The Iris shroud is a clean way to cover up. This instant classic is inspired by the Volkswagen Tiguan. Iris is all about adding a clean and clutter-free style to your retrofit. They feature a textured black lip that surrounds the glass projector lens on the inside, surrounded by a perfectly smooth vacuum metalized chrome finish. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984606912680,"sku":"S220","price":15.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26839.Iris.010_679bf2ad-1108-468c-8630-6856accacd60.jpg?v=1760025004"},{"product_id":"morimoto-panamera-projector-shroud-s250","title":"Panamera Projector Shroud","description":"\u003cp\u003ePanamera: Designed to cover the biggest of projectors, this two-piece shroud offers a design that's functional yet attractive. Inspired by the Porsche Panamera. This shroud can swallow everything from a smaller Morimoto Mini to a larger FX-R bi-xenon, and can be trimmed down to fit in medium headlights, or left whole to fill out gigantic housings. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL-Vents that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984616054952,"sku":"S250","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26848.Panamera.010_25edbdef-eb60-4512-a798-c7217e4e32e7.jpg?v=1760025194"},{"product_id":"morimoto-mc-r-projector-shroud-s230","title":"MC-R Projector Shroud","description":"\u003cp\u003eMC-R: The Mini Clubman Replica (MC-R) is the first two piece shroud from Morimoto. With it's big size, maximum coverage, and unique looks - it's a hit too! For a shroud inspired by the new Mini Cooper Clubman headlight, the MC-R is anything but \"Mini\" in size. It's massive body is ideal for large truck headlights. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. These shrouds feature DRL \"eyelets\" that will glow with light if you wanted to do something a bit different and mount the halos inside. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984628998312,"sku":"S230","price":16.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26840.MCR.010_d113231a-5402-4424-bc3a-c2182418f6c2.jpg?v=1760025633"},{"product_id":"morimoto-square-mini-gatling-gun-projector-shroud-s30","title":"Square: Mini Gatling Gun Projector Shroud","description":"\u003cp\u003eHip to be Square: Often requested, but never delivered: a stylish square-lens version of the Mini H1 projector. Although a true square-lens version of the Mini H1 still doesn't exist and probably wont... here comes the next best thing: A revised version of the Mini Gatling shroud with a squared-off opening to surround the lens! In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. Unaffected: Though the geometry of the shroud cuts off part of the projector lens to create the squared off look, light output will be unaffected, believe it or not! Mounting: could not be any easier with the Square Mini Gats. Four internal posts line up to the bolt pattern on the mid-section of any generation Mini H1 projector, so they'll bolt right up! Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984629096616,"sku":"S30","price":11.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27335.Square_Mini_Gatling_Gun.010_3241bf01-c647-454f-a118-bf2b1954c51d.jpg?v=1760025645"},{"product_id":"morimoto-panamera-1-0-projector-shroud-white-amber-led-switchback-s260","title":"Panamera 1.0 Projector Shroud (White\/Amber LED Switchback)","description":"\u003cp\u003ePanamera-LED: takes the original Panamera shrouds to an all new level of OEM plus! With a Type II White\/Amber Switchback LED circuit built into the backside of the shroud that illuminates the four lenses on each corner, these are undoubtedly the most baller status shrouds we've ever offered. With excellent coverage for most projectors too, they're also very functional. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto Panamera LED's use an XSB Switchback driver and high quality LED PCB in place of the cheap crap found in the generics. Their shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984629784744,"sku":"S260","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/27337.Panamera_Switchback_LED_1.010_fcebfe99-5543-4d42-97c9-d41e96c4bf46.jpg?v=1760025683"},{"product_id":"morimoto-e46-r-extended-projector-shroud-s160","title":"E46-R Extended Projector Shroud","description":"\u003cp\u003eE46-R Extended: An extended version of the original E46-R shroud, for those who believe that size does matter. Inspired by the BMW E46, enhanced for retrofitters. Compared to the standard E46-R, The \"Extended\" version is 10mm taller in overall height and has the dimples arrayed around it's face in a full circle. In Comparison: Don't make the mistake of thinking all shrouds are created equal. Even though less expensive alternatives may be available elsewhere: Morimoto shrouds are made from the highest quality plastic and have by far the most durable metalized chrome finishes. The cheapo's out there are flimsy enough to deform from the heat just a 35W HID bulb, and their chrome finish easily flakes off. A or B: At our shop, we're also meticulous with quality control. If a shroud has a minor factory defect; we sell it at a discount as a \"B stock\" unit - which is perfect for budget retrofits or when painting them is part of the plans. If you won't settle for anything less than perfect and plan to leave them chrome; go for the \"A Stock\" Shrouds. Mounting: Centric Rings are not included by default, but are highly recommended to improve ease of installation on many projectors. The Centric Rings are simple reducers that clip into the shroud to reduce the inside diameter, making them more of a \"press fit\" onto the lens holder of the projector. JB Quik Weld is also recommended in order to prevent the shrouds from vibrating loose over time. LED Halos: Are a unique and effective way to further customize the look of your projector retrofit. The Profile Pivot (switchback) and Profile Pixel (RGB) systems are easy to mount on the front of your shrouds, are reliable, and of course awesome looking. To determine which size is best for you - check out the size-guide in the images above. Trimming: Please note that trimming shrouds is a common task when retrofitting. Whether required to clear part of the projector, or fit within the geometry of your headlight housing; it's normal. Luckily, they're made of plastic - making that easily possible. We recommend a Dremel hand tool with EZ Lock cutting wheels to make the job easy.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":53984634667176,"sku":"S160","price":12.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0496\/1016\/2344\/files\/26830.E46R_Extended.010_682e8056-3c9d-4ab3-bf4e-a860383bb6c9.jpg?v=1760025893"}],"url":"https:\/\/eliteracefab.com\/collections\/projectors-retrofit.oembed","provider":"eliteracefab.com","version":"1.0","type":"link"}