Torque Solution Steering Rack Brace
Applications: Subaru WRX / STI 2008+ / Forester XT / Legacy GT

Torque Solution Steering Rack Brace is the perfect complement for the serious enthusiast that demands the most from their vehicle. Installing our brace will help increase steering response and feel by reducing the flex caused by the thin OEM brace. Simply remove the OEM brace and replace with our more rigid unit using the new supplied hardware.

- Steel Construction
- Black Powder Coated
- Improves Steering Response and Feel
- Zinc Grade 12.9 Alloy Steel Hardware
- Easy Install
- Limited Lifetime Warranty

**Will not fit 2015+ WRX.

Install Instructions:
Step 1: Remove under shield.
Step 2: It is highly recommended to support the rack at this point to prevent seal damage.
Step 3: Remove 4 bolts on stock brace.
Step 4: Carefully maneuver OEM brace out be sure not to snag or damage steering lines.
Step 5: Carefully maneuver new brace in place.
Step 6: Insert 4 new included bolts w/ washers.
Step 7: Torque in crisscross pattern down to spec (44.3 ft/lbs / 60N*M)
Step 8: Repeat Step 1 in reverse order.