Proudly US Veteran Founded! We strive to have the best prices and customer service in the industry.
×
-13%
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - eliteracefab.com
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - eliteracefab.com
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - eliteracefab.com
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - eliteracefab.com
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - eliteracefab.com
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - eliteracefab.com
Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black - eliteracefab.com
Click to zoom in

Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black

2 sold in last 8 hours
Skunk2 Racing
SKK542-05-2195
In stock
Control Arms
$441.92 $381.83
Skunk2 has done it again! While others are busy imitating our Pro Series LCA’s, Skunk2 engineers have put 100's of hours of extensive R & D to revolutionize a product...

Skunk2 Honda/Acura EG/DC Ultra Series Rear Lower Control Arm Set - Black

Skunk2 has done it again! While others are busy imitating our Pro Series LCA’s, Skunk2 engineers have put 100's of hours of extensive R & D to revolutionize a product that was once thought to be dialed in. Skunk2 is proud to announce the release of the Ultra Series Rear Lower Control Arms... themost complete solution for the ’89-’95 Civic/ CRX and ’90-’01 Integra.

 

The Ultra Series Lower Control Arm offers the hardcore racer and discerning enthusiast, the very best of the best. In a market full of “Me Too” Product, and recycled, annealed lower control arms, we took the Lower Control Arm back to the drawing board. Often not used due to the higher cost, we chose 7075-T6 because of its exceptional strength to weight ratio and fatigue strength. With an ultimate tensile strength of over 78,000 PSI, and fatigue strength of 23,000 psi for 500 million cycles – This is the perfect material for our game changing Ultra LCA’s. The result of our hard work is a 7075-T6 Forged Aluminum LCA, that is 19% lighter and 27% stronger than our previous generation of LCA’s.

 

Accurate suspension geometry is maintained under the most aggressive driving conditions using high load steel spherical bearings on the trailing arm side and tuned durometer elastomeric bushings for the sub frame side of the LCA. Delrin bushings are utilized at the shock mounting position for their low friction and minimal deflection for unparalleled dynamic shock control. Using this select combination of bushings allows the most comfort and control under any driving conditions.

 

FEATURES:

CNC Machined from Forged 7075 Aluminum
44% Lighter than OEM Arms
19% Lighter than Original Skunk2 Pro Series Arms
27% Stronger than Original Skunk2 Pro Series Arms
Outboard Spherical Bearing Eliminates Bushing Twist
Tuned Polyurethane Inboard Bushing Dampens NVH
 Delrin Shock Mount Bushings for Improved Shock Performance
**Optional Inboard Spherical Bearing Upgrade Available**

 

For hardcore race level handling, we have also added the option to replace the sub frame side elastomeric bushing with a high load steel spherical bushing for a no-nonsense track car. The bushing change can be done in minutes with basic tools. Properly designed suspension components must be strong and functional first and aesthetically pleasing second. Skunk2’s Rear Lower Control Arms are both. For maximum suspension performance, Skunk2 Rear Lower Control Arms are best complemented with Skunk2 Rear Camber Kits, Lower Arm Bars, and Strut Tower Bars.

 

 

 

Not compatible with '88 model rear shocks. Must use Skunk2 Sport Shocks, Pro-S Coilovers, Pro-C Coilovers or similar.
  • 1988 - 1995 Honda Civic (1.6L CX/DX/EX/GX/HX/LX/Si)
  • 1993 - 1997 Honda Del Sol (1.6L S/Si/VTEC)
  • 1988 - 1991 Honda CR-X (1.6L S/Si)
  • 1990 - 2001 Acura Integra (1.8L GS/GS-R/LS/Type R)
Download PDF View Product Page
Read More
Read Less

Testimonials

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.

James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.

Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

FAQs

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×