-18%

BBK Ford Mustang GT 4.6L 86mm 24lb CAC Mass Air Meter 96-98

BBK 96-98 Mustang GT Mass Air Meter 86mm 24 lb Inj. Cold Air Calibration - eliteracefab.com

Click to zoom in

Load image into Gallery viewer, BBK Ford Mustang GT 4.6L 86mm 24lb CAC Mass Air Meter 96-98

Load image into Gallery viewer, BBK 96-98 Mustang GT Mass Air Meter 86mm 24 lb Inj. Cold Air Calibration - eliteracefab.com

BBK Ford Mustang GT 4.6L 86mm 24lb CAC Mass Air Meter 96-98

Name: BBK Ford Mustang GT 4.6L 86mm 24lb CAC Mass Air Meter 96-98
Brand: BBK
SKU: BBK8014
Price: 372.33 USD
Availability: InStock

2 sold in last 8 hours

Brand: BBK

SKU: BBK8014

availability: In stock

Product Code: Mass Air Flow Sensors

$456.06 $372.33

PART #8014 FEATURES: Ford Mustang Mass Air Meter Calibrated For Your Mustang 76mm Housing For Additional Airflow for More Power CNC Machined 356 Aluminum Housing With Charcoal Finish Custom Calibrated...

Quantity

Quantity must be 1 or more

Description

Description

PART #8014

FEATURES:

Ford Mustang Mass Air Meter Calibrated For Your Mustang
76mm Housing For Additional Airflow for More Power
CNC Machined 356 Aluminum Housing With Charcoal Finish
Custom Calibrated For 24lb Injectors And A Fender Well Style Cold Air Intake
Cold Air Calibration (Cold Air Calibration)
Precisely Calibrated Electronic Sensor for Accurate A/F Ratio
Calibrated for 24 lb/hr Injectors And Air Entering From A 90 Degree Cold Air Elbow.

VEHICLE FITMENT:

1996-1998 Ford Mustang GT 4.6L
Does NOT work with Cobra ECM

Precisely Calibrated
This BBK 86mm mass air meter for 1996-1998 Mustang GT 4.6 is calibrated to work with larger 24 lb/hr injectors and a fender well style cold air intake kit to support more power. Starting with an all new 356 aluminum casting each unit is powder coated then fully CNC machined to exact specifications before being fitted with one of BBK's electronically calibrated mass air sensor modules to ensure an accurate air/fuel ratio for the best possible performance potential.

Gain Up To 10+ RWHP in Minutes
Dyno testing has shown up to 10+ RWHP gains while maintaining an accurate air/fuel ratio unlike some competitor's units that are not electronically calibrated and may fail to maintain the all important air/fuel ratio.

Installation
BBK Mustang mass air meters are designed to be a direct fit for a simple installation. All you have to do is swap the BBK MAF in place of the stock meter.

Emissions Information
This part is NOT C.A.R.B Approved and cannot be installed for use on any emission controlled vehicle in California.
It cannot be sold or shipped to any California resident or addressee.

DOWNLOAD INSTALLATION INSTRUCTIONS

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

BBK Ford Mustang GT 4.6L 86mm 24lb CAC Mass Air Meter 96-98

PART #8014

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart

trending

Popular Products

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

BBK Ford Mustang GT 4.6L 86mm 24lb CAC Mass Air Meter 96-98

PART #8014

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart