Fleece Performance 05-09 Dodge PowerFlo Lift Pump Assembly - eliteracefab.com

Click to zoom in

Fleece Performance 05-09 Dodge PowerFlo Lift Pump Assembly

Name: Fleece Performance 05-09 Dodge PowerFlo Lift Pump Assembly
Brand: Fleece Performance
SKU: FPEFPE-34560
Price: 1088.53 USD
Availability: InStock

2 sold in last 8 hours

Brand: Fleece Performance

SKU: FPEFPE-34560

availability: In stock

Product Code: Fuel Pump Hangers

$1,088.53

Fleece Performance 05-09 Dodge PowerFlo Lift Pump Assembly

Quantity

Quantity must be 1 or more

Description

Description

Fleece Performance 05-09 Dodge PowerFlo Lift Pump Assembly

Customer Reviews

Based on 1 reviews Average Rating 5.0 stars out of 5

Filter 1 Review with 5 star rating

Filter 0 Review with 4 star rating

Filter 0 Review with 3 star rating

Filter 0 Review with 2 star rating

Filter 0 Review with 1 star rating

Evan Shane E. S. Evan S.
06-03-2022

Do it!!!!

2006 Cummins, tuner, 156k. We all know the one parameter Dodge does not watch, fuel pressure, is the ultimate insurance to protecting your cp3 and injectors. My truck was doing fine on rail pressures until I moved to Edge Juice settings 3-5. Add Big Line kit and necessary sensor for fuel pressure. Stock lift pump makinng 7.5-8.3psi in my inclined driveway. On flat ground stock pump 9-9.5psi. Juice power level 3 with low boost response set at 5, the truck was tanking fuel pressure to 4psi. CP3 KILLER. After a lot of research, I found this stellar part. When you push liquid, there may be nominal aeration of fuel which is mitigated by the high pressure system. When you suck fluid, there is no avoiding aeration which requires additional parts to mitigate. Install does not require surgery to bulkhead as it is an entire replacement unit. Wiring a cinch(4 door shorted, enough wire to route to passenger battery to avoid congested primary battery). No fuel line work necessary. Stock lines tranfer over, you do have to move the two plastic clips for the connections over from factory bulkhead. I had a quarter tank of fuel. Do your best to run the tank as low as possible or transfer fuel out. I had help, but a quarter is an extra 50lbs or so that moves. Also, drain fuel filter cannister completely to avoid back drain of fuel towards the tank, your new pump will fill that cannister in seconds with the first turn of the key to ON not START. You will hear it. WARNING- tank ring install-mine came right off, back on different story. This is not an armstrong procedure. It is an attack angle procedure. As shallow as possible with light taps is how it ended up going back on. Result- At 20psi +/- yoiu will find any loose fuel fittings. I highly suggest a Glowshift Big Line Kit (1/2� line from fuel filter to cp3, $45) while you�re at it. My truck has never been so quiet. That means the pump/injectors have been semi-starved for longer than I care to know. You will notice smoother and more quite idle, more immediate and smoother throttle response, and zero fuel starvation. This pump might as well be silent. Hardly any extra noise overstock lift pump. I have now tested with Edge set on power level 4 and 5 with low boost response set at 5 on both power levels(stock injectors, upgraded HE351) and the absolute rock bottom FP has been 18.4psi, zero rail pressure tanking, and immediate recovery of FP from 18psi right back to 20-21psi (my readings derived from sensor between filter can and CP3). This is on your factory pinner supply/return lines. YOU CAN�T GO WRONG!!!!!!!! Last, but not least, Elite had this to my door in 3 days un-expedited.

Ask your Question about this product

Testimonials

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

Fleece Performance 05-09 Dodge PowerFlo Lift Pump Assembly

Customer Reviews

Write a Review

Do it!!!!

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart

trending

Popular Products

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

Fleece Performance 05-09 Dodge PowerFlo Lift Pump Assembly

Customer Reviews

Write a Review

Do it!!!!

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart