Hawk Performance Ceramic
Hawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.
Expert Opinion
The Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.
Hawk Performance Ceramic Compound Characteristics:
- Extremely Quite
- Ultra-low Dust
- Improved Stopping Power
- Gentle on rotors
- Stable Friction Output
- 100-650 Deg F Operating Temperature Range
- 100-450 Deg F Optimal Temperature Range
Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Street Compounds
- Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
- Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
- DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
- Allow 15 minutes or more for the brake system to cool down.
- Your new Hawk pads are ready for use.
This part is for the Rear of:
- 2019 BMW X6 xDrive35i 3.0L
- 2019 BMW X6 sDrive35i 3.0L
- 2018 BMW X6 xDrive35i 3.0L
- 2018 BMW X6 sDrive35i 3.0L
- 2018 BMW X5 xDrive40e 2.0L
- 2018 BMW X5 xDrive35i 3.0L
- 2018 BMW X5 xDrive35d 3.0L
- 2018 BMW X5 sDrive35i 3.0L
- 2017 BMW X6 xDrive35i 3.0L
- 2017 BMW X6 sDrive35i 3.0L
- 2017 BMW X5 xDrive40e 2.0L
- 2017 BMW X5 xDrive35i 3.0L
- 2017 BMW X5 xDrive35d 3.0L
- 2017 BMW X5 sDrive35i 3.0L
- 2016 BMW X6 xDrive35i 3.0L
- 2016 BMW X6 sDrive35i 3.0L
- 2016 BMW X5 xDrive40e 2.0L
- 2016 BMW X5 xDrive35i 3.0L
- 2016 BMW X5 xDrive35d 3.0L
- 2016 BMW X5 sDrive35i 3.0L
- 2015 BMW X6 xDrive35i 3.0L
- 2015 BMW X6 sDrive35i 3.0L
- 2015 BMW X5 xDrive35i 3.0L
- 2015 BMW X5 xDrive35d 3.0L
- 2015 BMW X5 sDrive35i 3.0L
- 2014 BMW X6 xDrive35i 3.0L
- 2014 BMW X5 xDrive35i To 11/2013 3.0L
- 2014 BMW X5 xDrive35i From 11/2013 3.0L
- 2014 BMW X5 xDrive35d To 11/2013 3.0L
- 2014 BMW X5 xDrive35d From 11/2013 3.0L
- 2014 BMW X5 sDrive35i To 11/2013 3.0L
- 2014 BMW X5 sDrive35i From 11/2013 3.0L
- 2013 BMW X6 xDrive35i 3.0L
- 2013 BMW X5 xDrive35i 3.0L
- 2013 BMW X5 xDrive35d 3.0L
- 2012 BMW X6 xDrive35i 3.0L
- 2012 BMW X5 xDrive35i 3.0L
- 2012 BMW X5 xDrive35d 3.0L
- 2011 BMW X6 xDrive35i 3.0L
- 2011 BMW X5 xDrive35i 3.0L
- 2011 BMW X5 xDrive35d 3.0L
- 2010 BMW X6 xDrive35i 3.0L
- 2010 BMW X5 xDrive35d 3.0L
- 2010 BMW X5 xDrive30i 3.0L
- 2010 BMW 535i xDrive Base 3.0L
- 2010 BMW 528i xDrive Base 3.0L
- 2010 BMW 528i Base 3.0L
- 2010 BMW 528i
- 2009 BMW X6 xDrive35i From 10/2008 3.0L
- 2009 BMW X5 xDrive35d 3.0L
- 2009 BMW X5 xDrive30i 3.0L
- 2009 BMW 535i xDrive Base 3.0L
- 2009 BMW 528i xDrive Base 3.0L
- 2009 BMW 528i Base 3.0L
- 2009 BMW 528i
- 2008 BMW X5 3.0si 3.0L
- 2008 BMW 535xi Base 3.0L
- 2008 BMW 535xi
- 2008 BMW 528xi Base 3.0L
- 2008 BMW 528xi
- 2008 BMW 528i Base 3.0L
- 2008 BMW 528i
- 2007 BMW X5 3.0si 3.0L
- 2007 BMW 530xi Base 3.0L
- 2007 BMW 530xi
- 2007 BMW 530i Base 3.0L
- 2007 BMW 530i
- 2007 BMW 525xi Base 3.0L
- 2007 BMW 525xi
- 2007 BMW 525i Base To 02/2007 3.0L
- 2007 BMW 525i Base From 02/2007 3.0L
- 2007 BMW 525i
- 2006 BMW 530xi Base 3.0L
- 2006 BMW 530xi
- 2006 BMW 530i Base 3.0L
- 2006 BMW 530i
- 2006 BMW 525xi Base 3.0L
- 2006 BMW 525xi
- 2006 BMW 525i Base 3.0L
- 2006 BMW 525i
- 2005 BMW 530i Base 3.0L
- 2005 BMW 530i
- 2005 BMW 525i Base 2.5L
- 2005 BMW 525i
- 2004 BMW 530i Base 3.0L
- 2004 BMW 530i
- 2004 BMW 525i Base 2.5L
- 2004 BMW 525i
Testimonials
James LoweLooks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Richard WestbrookBought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
FAQs
We are open Monday-Friday from 8am-6pm EST
Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403
Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.
We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.
As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.