Injen Technology is proud to bring you our Turbo Inlet Pipe for Volkswagen and Audi vehicles equipped with the Gen 3 1.8L / 2.0L Turbo engines and the Volkswagen MK7 and Audi 8V applications. The wide array of vehicle fitments is impressive for this one part, so please check and confirm fitment before ordering.
In our constant search for power gains, we have discovered a trend in modern automotive design: sacrificing raw performance for quiet operation. As enthusiasts ourselves, we want to hear every power generating mechanism working to its fullest, from the intake tract to exhaust.
While developing our industry leading intake kits for this generation of Volkswagen and Audi vehicles, we found that the factory turbo inlet pipe is purposefully restrictive to create a quieter cabin environment. While that may be well and good for most, as enthusiasts, we knew there had to be a way to minimize that restriction and allow the maximum amount of air into the turbo. Our highly skilled Research and Development team got straight to work and came back with this seemingly simple solution.
The SES3078TIP has a larger internal diameter to give your turbo free access to as much air as it can ever need. It is also designed with smooth airways to minimize turbulence and keep drag from fighting against your turbo’s compressor. This simple change alone also increased the sound output of the turbo, giving you both tangible and audible performance gains. On our quest to make this part as durable as humanly possible, we have integrated the PCV Inlet as well as the mounting arm into the Unibody Cast Aluminum housing.
In typical Injen fashion, we provide only the best hardware with our performance componentry. From our Two-Ply Automotive Grade Silicon Couplers to our Stainless-Steel Band Clamps with an Inner Protective Liner, all included hardware is designed to resist the heat, pressure, fuel, and oil to last for years to come. In the event that something does happen down the line, we have you covered by the unmatched Injen Limited Lifetime Warranty.
- Dyno Proven Gains of up to 14 hp and 11 lb-ft. of torque.
- Cast Aluminum Housing offers far superior durability over OEM plastic component.
- Provides faster turbo spool, increased responsiveness, and greater turbo sound output.
- Precision CNC Machined Fittings for a superior seal and simple installation.
- Fully integrated CNC Machined PCV Inlet provides an OE fitment and seal.
- 3” Inlet OD minimizes turbulence and allows the maximum amount of air to reach the turbo.
-
Note - Will only work with 3.00" Tubing
- 3” Reinforced Silicon Automotive Grade Coupler included for increased longevity.
- Stainless Steel Band Clamps with Inner Protective Liner.
- Fully integrated Mounting Bracket minimizes the chance of mounting hardware loosening over time.
- Fits directly in place of the OEM component, maximizing compatibility with other OEM and aftermarket components.
- Simple Installation, no cutting or drilling required.
- Complementing Injen Cold Air Intakes, Throttle Controllers, and Intercooler Charge Pipes available for various VW/Audi Applications. Check the Injen Application guide for your specific application.
- Includes the industry leading Injen Limited Lifetime Warranty.
Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Important: Please verify that your vehicle is listed in the Fitment tab before purchasing.
Fitment
| Year |
Make |
Model |
Engine |
| 2015-2016 |
Audi |
A3 |
L4-1.8L Turbo |
| 2015-2020 |
Audi |
A3 |
L4-2.0L Turbo |
| 2015-2020 |
Audi |
A3 Quattro |
L4-2.0L Turbo |
| 2015-2020 |
Audi |
S3 |
L4-2.0L Turbo |
| 2016-2023 |
Audi |
TT Quattro |
L4-2.0L Turbo |
| 2016-2023 |
Audi |
TTS Quattro |
L4-2.0L Turbo |
| 2019-2021 |
Volkswagen |
Arteon |
L4-2.0L Turbo |
| 2018-2021 |
Volkswagen |
Atlas |
L4-2.0L Turbo |
| 2015-2018 |
Volkswagen |
Golf |
L4-1.8L Turbo |
| 2015-2019 |
Volkswagen |
Golf |
L4-2.0L Turbo |
| 2017-2019 |
Volkswagen |
Golf Alltrak |
L4-1.8L Turbo |
| 2015-2019 |
Volkswagen |
Golf Sportwagen |
L4-1.8L Turbo |
| 2015-2020 |
Volkswagen |
GTI |
L4-2.0L Turbo |
| 2019-2023 |
Volkswagen |
Jetta GLI |
L4-2.0L Turbo |
| 2013-2017 |
Volkswagen |
Passat |
L4-1.8L Turbo |
| 2018-2021 |
Volkswagen |
Passat |
L4-2.0L Turbo |
| 2018-2021 |
Volkswagen |
Tiguan |
L4-2.0L Turbo |
Instructions
Dyno Chart
SES3078TIP Instructions
Shipping
Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States (Does not include HI/PR/AK/GU) on qualifying orders! Orders that do not qualify for free shipping will be subject to a shipping charge during checkout. Some exceptions are Freight and Non-EPA compliant items. Please check the product description or shipping option to see if this product can be shipped to a CA address or requires an additional freight shipping option. If the product does require a freight option, please select the shipping option during checkout or wait to get an invoice within 24-48 hrs prior to your order being placed. Thank you!
As for delivery times, generally speaking all items can arrive to any US address within 2-6 business days with Free Economy Shipping(to any Continental US address)for all qualifying orders. In the event that you would like to get your items faster, please select one of our faster options such as UPS/Fedex Ground (3-5 Days) , UPS/Fedex 3 Day Air, UPS/Fedex 2nd Day Air, UPS/Fedex Next Day Air or any of the USPS options to your address. All shipping prices displayed are at our cost. We get insanely good shipping rates due to the volume of packages we ship daily, and we pass this savings directly to our customer.
NOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.
