-
Vendor: Stainless Works2010-15 Camaro 6.2L Long Tube Header kit. Unleash the performance in your LS motor today with some long tube headers from Stainless Works. 1-7/8" mandrel bent primaries that flow into our 3" slip fit collectors for maximum scavenging. Our High-Flow cats will connect to...
- $1,716.13
$1,806.45- $1,716.13
- Unit price
- per
-
Vendor: Stainless Works2016-23 Camaro 6.2L Long Tube Header kit. Unleash the performance in your LS motor today with some long tube headers from Stainless Works. Your choice of 2" or 1-7/8" mandrel bent primaries that flow into our 3" slip fit collectors for maximum scavenging. Our...
- $4,211.24
$4,432.88- $4,211.24
- Unit price
- per
-
Vendor: ARPARP SBC 6.2L LT1 Hex Header Bolt Kit
- $36.89
$42.65- $36.89
- Unit price
- per
-
Vendor: ARPARP Mopar 340-360 SS 12pt Header Bolt Kit
- $34.24
$39.58- $34.24
- Unit price
- per
-
Vendor: Cometic GasketCometic Gasket Inc. Exhaust Gaskets are designed to be used with manifolds or headers. Offered in a range of materials to make sure you are covered with any cylinder head and manifold/header combination. All exhaust gaskets are designed to be used without the use...
- $37.84
$44.18- $37.84
- Unit price
- per
-
Vendor: Stainless WorksUnlock the power of that 6.2L motor today with this long tube header kit from Stainless Works. Featuring 1-7/8 inch primaries and a 3 inch collector, this system increases horsepower and torque on your truck with just a bolt on installation and a tune....
- $3,177.87
$3,345.13- $3,177.87
- Unit price
- per
-
Vendor: BD DieselThe BD Full Bore Exhaust Manifold for the Chevy Duramax engine replaces factory driver's side "pinched down" unit, restoring exhaust flow and balances the V8 engine for smother running. Made from high-silicon ductile iron, the Full Bore is a direct, bolt-in replacement for the...
- $264.93
- $264.93
- Unit price
- per
-
Vendor: aFePerformance Gains:This system produced gains of up to +6 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. 1-5/8 IN Stainless Steel Construction:This system is constructed of 1-5/8 IN mandrel-bent stainless steel tubing for maximum strength and durability. Titanium Cerakote...
- $1,338.69
$2,321.22- $1,338.69
- Unit price
- per
-
Vendor: aFeThis system produced gains of up to +9 HP and +14 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-7/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This coating combination reduces the outside...
- $1,883.57
$3,266.00- $1,883.57
- Unit price
- per
-
Vendor: aFeThis system produced gains of up to +9 HP and +14 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-7/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Factory style laser cut machined flanges...
- $1,475.87
$2,559.06- $1,475.87
- Unit price
- per
-
Vendor: Kooks HeadersKooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of...
- $4,237.82
$5,009.24- $4,237.82
- Unit price
- per
-
Vendor: Kooks HeadersKooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of...
- $3,595.55
$4,158.09- $3,595.55
- Unit price
- per
-
Vendor: JBAJBA Cat4Ward® Header 11-14 F-150 5.0L Coyote 1 5/8" Primary Raw 409 1688SThis Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX...
- $915.64
$1,007.22- $915.64
- Unit price
- per
-
Vendor: aFeaFe Twisted Steel 409SS Shorty Header 04-10 Ford F-150 V8-5.4L NOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK...
- $979.33
$1,698.09- $979.33
- Unit price
- per
-
Vendor: Kooks HeadersKooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of...
- $3,693.96
$4,275.51- $3,693.96
- Unit price
- per
-
Vendor: JBAHeader Tube Type: Full-length Finish: Raw Flange Style: Standard Primary Tube Diameter: 1-3/4" Material Type: Stainless Steel Color: Natural Weld-Up: No MFG. Part #: 6610S Collector Diameter: 3 Inch Hardware Included: Yes Gasket(s) Included: Yes Sold in Quantity: Pair GTIN Code: 694342530792 Info JBA...
- $1,184.11
$1,302.53- $1,184.11
- Unit price
- per
-
Vendor: JBAHeader Tube Type: Full-length Finish: Ceramic Coated Flange Style: Standard Primary Tube Diameter: 1-5/8" Material Type: Stainless Steel Color: Silver Weld-Up: No MFG. Part #: 6035SJS Collector Diameter: 2-1/2 Inch Hardware Included: Yes Gasket(s) Included: Yes Sold in Quantity: Pair GTIN Code: 694342535544 Info...
- $1,551.79
$1,706.97- $1,551.79
- Unit price
- per
-
Vendor: JBAPRODUCT DESCRIPTION JBA 1964s - JBA 04-08 Chrysler 5.7L HEMI 1-3/4in Primary Raw 409SS Cat4Ward Header; 2004-2008. Race proven technology for maximum hp/tq gains Mandrel-bent stainless steel primary tubes Best flow, durability, improved throttle response Will not distort like lesser quality headers, no leaks...
- $898.99
$988.90- $898.99
- Unit price
- per
-
Vendor: JBAHeader Tube Type: Shorty Finish: Raw Flange Style: Standard Primary Tube Diameter: 1-1/2" Material Type: Stainless Steel Color: Natural Weld-Up: No MFG. Part #: 2011S Collector Diameter: 2-1/2 Inch Hardware Included: Yes Gasket(s) Included: Yes Sold in Quantity: Pair GTIN Code: 694342528669 EO#: D-57-33...
- $1,266.67
$1,393.34- $1,266.67
- Unit price
- per
-
Vendor: JBAPRODUCT DESCRIPTION JBA 1964sjs - JBA 04-08 Chrysler 5.7L HEMI 1-3/4in Primary Silver Ctd Cat4Ward Header; 2004-2008. Mandrel bent stainless steel tube Patented JBA Firecone collector Factory style emission connections Extra thick collector domes 3/8 inch thick CNC laser-cut flanges with oversized exhaust ports...
- $1,123.07
$1,235.38- $1,123.07
- Unit price
- per