Proudly US Veteran Founded! We strive to have the best prices and customer service in the industry.
×
My Account
336-900-7223

Email/Chat 8am-6pm
Phones 9am-5pm
M-F EST

0 My Cart: $0.00

Your cart is currently empty.

Continue shopping
Total: $0.00
View cart

Shop by Categories

Toggle menu
0
  • Home
  • Oiling System
  • Moroso Ford 5.0 Coyote (w/Rear Sump) Road Race Baffled Wet Sump 9qt 6-5/8in Aluminum Oil Pan
Moroso Ford 5.0 Coyote (w/Rear Sump) Road Race Baffled Wet Sump 9qt 6-5/8in Aluminum Oil Pan - eliteracefab.com
Click to zoom in
Load image into Gallery viewer, Moroso Ford 5.0 Coyote (w/Rear Sump) Road Race Baffled Wet Sump 9qt 6-5/8in Aluminum Oil Pan - eliteracefab.com

Moroso Ford 5.0 Coyote (w/Rear Sump) Road Race Baffled Wet Sump 9qt 6-5/8in Aluminum Oil Pan

2 sold in last 8 hours
Moroso
MOR20572
In stock
Oil Pans
$982.93
Aluminum, Wet Sump, 6-5/8" Deep Engine Application: Ford 5.0 Modular "Coyote" Engines Fits: Mustang '11-Up & other Ford Rear Sump conversions with Ford "Coyote" or "Voodoo" Engines, (check measurements) Features: Pan...

Moroso Acura/Honda 1.6L B16A3 Road Race Baffled Wet Sump 5.5qt 6in Steel Oil Pan
Moroso Acura/Honda 1.6L B16A3 Road Race Baffled Wet Sump 5.5qt 6in Steel Oil Pan
$550.15
Moroso Chevrolet Big Block Mark IV (w/Double Power Kick Outs) Wet Sump 6-7qt 8in Aluminum Oil Pan
Moroso Chevrolet Big Block Mark IV (w/Double Power Kick Outs) Wet Sump 6-7qt 8in Aluminum Oil Pan
$1,357.92 $1,168.21
Moroso Ford 5.0 Coyote (w/Rear Sump) Road Race Baffled Wet Sump 9qt 6-5/8in Aluminum Oil Pan
Description

Aluminum, Wet Sump, 6-5/8" Deep

Engine Application: Ford 5.0 Modular "Coyote" Engines

Fits: Mustang '11-Up & other Ford Rear Sump conversions with Ford "Coyote" or "Voodoo" Engines, (check measurements)

Features:
  • Pan has a thick steel or billet aluminum rail with a 2-3/8" deep front section and a 6-5/8" deep by 9" long rear sump
  • Designed to be used with the 5.0 "Coyote"/5.2 "Voodoo" Gen 1 or 2 factory windage tray and dipstick
  • Features a race-proven, four trap door assembly and anti-slosh baffle that keeps oil contained in oil pump pickup area during road racing and drag racing
  • 1/2" NPT fitting for supercharger drain back
  • 1/2" NPT fitting for oil temperature sender
  • 20mm fitting for the factory oil level sensor*
  • On Gen 1 & 2 Coyote//Voodoo engines use factory oil pump pickup and on Gen 3 "Coyote/Voodoo" engines use Part No. 24578

*If the factory low oil warning sensor is not going to be used, Part 22738, 20mm Plug with copper washer is available.

 

Other Part Numbers:
Moroso #mor20572

Read More
Read Less

Testimonials

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.

James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.

Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×