FREE S&H ON ORDERS OVER $100 -- EXCLUDES FREIGHT SHIPPING AND FLUIDS **LIMITED TIME**
×
My Account
336-900-7223

Email/Chat 8am-6pm
Phones 9am-5pm
M-F EST

0 My Cart: $0.00

Your cart is currently empty.

Continue shopping
Total: $0.00
View cart

Shop by Categories

Toggle menu
0
  • Home
  • Pistons
  • Supertech Mazda Miata 1.8L 85mm Bore 30.5mm Comp Height 10cc Dome 11:1 CR Pistons - Set of 4
-27%
Supertech Mazda Miata 1.8L 85mm Bore 30.5mm Comp Height 10cc Dome 11:1 CR Pistons - Set of 4 - eliteracefab.com
Click to zoom in
Load image into Gallery viewer, Supertech Mazda Miata 1.8L 85mm Bore 30.5mm Comp Height 10cc Dome 11:1 CR Pistons - Set of 4 - eliteracefab.com

Supertech Mazda Miata 1.8L 85mm Bore 30.5mm Comp Height 10cc Dome 11:1 CR Pistons - Set of 4

2 sold in last 8 hours
Supertech
SPTP4-MA85-P10
In stock
Piston Sets - Forged - 4cyl
$1,100.06 $793.97
Supertech Mazda Miata 1.8L 85mm Bore 30.5mm Comp Height 10cc Dome 11:1 CR Pistons - Set of 4 Piston KitFor Naturally Aspirated/Nitrous ApplicationsFor use w/ Ring Set GNH8500 Supertech Pistons...

Wiseco Nissan KA24 Dished 10.6:1 CR 89.5mm Piston Kit
Wiseco Nissan KA24 Dished 10.6:1 CR 89.5mm Piston Kit
$1,034.73 $879.51
CP Piston & Ring Set for Acura B18A/B1 - Bore (81.5mm) - Size (+0.5mm) - Compression Ratio (9.0)
CP Piston & Ring Set for Acura B18A/B1 - Bore (81.5mm) - Size (+0.5mm) - Compression Ratio (9.0)
$1,714.17 $1,148.50
Supertech Mazda Miata 1.8L 85mm Bore 30.5mm Comp Height 10cc Dome 11:1 CR Pistons - Set of 4
Description

Supertech Mazda Miata 1.8L 85mm Bore 30.5mm Comp Height 10cc Dome 11:1 CR Pistons - Set of 4

Piston Kit
For Naturally Aspirated/Nitrous Applications
For use w/ Ring Set GNH8500

Supertech Pistons are manufactured from extruded high silicone, enhanced 4032 alloy (with additional Cu, Ni & Mg) that had low thermal expansion, excellent wear resistance and higher thermal conductivity. Supertech Pistons, with this alloy, have withstood up to 42psi of boost, with alcohol, without any problems.

A two or three step forging process yields a fine structural grain which are then submitted to several machining steps in state of the art CNC machines.

Several heat treatments provide the piston with high tensile strength and evenly distributed hardness.

Contact reduction grooves are standard, and pin bores are honed and reamed for precise fit. Wrist pins are constructed of cold extruded chrome moly steel for high strength and used with wire clip locks.

Finally, the pistons receive a ?phosphate dry lubricant? coating to protect the rings against ?micro-welding? and enhance lubrication on the skirt/cylinder area.

Compression ratios are computed with .030? head gasket and .010? deck unless indicated in each case.

Bore 85.00mm[2mm+ Oversized]
Comp Height 1.201" (30.5mm)
Comp Ratio 11:1
Dome/Dish Volume CCs 10
Pin Diameter 20mm (.787")
Pin Weight 73.4grams
Piston Weight CALLgrams
Rod Length 5.228"
Skirt Style Round
Stroke

3.346"
Read More
Read Less

Testimonials

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.

James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.

Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×