-14%

Torque Solution Turbo Inlet Hose Black (Non-Recirc): 02-07 Subaru WRX / 04-20 STI / 05-09 Legacy GT - eliteracefab.com

Click to zoom in

Torque Solution Turbo Inlet Hose Black (Non-Recirc): 02-07 Subaru WRX / 04-20 STI / 05-09 Legacy GT

Name: Torque Solution Turbo Inlet Hose Black (Non-Recirc): 02-07 Subaru WRX / 04-20 STI / 05-09 Legacy GT
Brand: Torque Solution
SKU: TQSTS-SU-565-NR
Price: 350.12 USD
Availability: InStock

2 sold in last 8 hours

Brand: Torque Solution

SKU: TQSTS-SU-565-NR

availability: In stock

Product Code: Hoses

$411.90 $350.12

Quantity

Quantity must be 1 or more

Description

Description

Torque Solution 3" (76mm) Turbo Inlet Hose (Non-Recirculated)
Applications: Subaru WRX 2002-2007, STI 2004-2020, Legacy GT 2005-2009, Forester XT 2004-2013

Torque Solution Turbo Inlet Hose for the Subaru EJ Engines w/ 3" Inlet Turbo. Our silicone inlet hose is much larger in size and smooths the air entering the turbo compared to the restrictive OEM corrugated inlet hose. Our inlet hose is made from 4 ply high grade silicone and wire reinforced to prevent collapsing under high pressure. We include 2 black anodized billet aluminum joiners to connect to either 2.75" or 3" intakes.

- Smooths Airflow Entering Turbo
- Increases Air Flow
- Eliminates failure prone corrugated rubber hose
- 4 Ply Silicone w/ Wire Reinforcement
- Includes Silicone Friendly Stainless Steel Hose Clamps
- Direct Fitment for Aftermarket 3" (76mm) Inlet Turbo's
- Non Recirculated for Vent to Atmosphere (Speed Density) Set Ups
- Limited Lifetime Warranty

Includes:
- 3" Non Recirc Black Silicone Turbo Inlet Hose (1)
- 3" Billet Aluminum Coupler (for 3" Intakes) (1)
- 3" to 2.75" Billet Aluminum Reducer Coupler (for 2.75" Intakes) (1)
- 70-90mm Silicone Safe Worm Gear Clamp (2)
- 3/8" 90 Degree Nylon Elbows (3)
- 1/2" to 3/8" 90 Degree Nylon Reducer Elbows (2)
- 1/2" to 3/8" Straight Nylon Reducer (2)
- 5/16" to 3/8" Straight Nylon Reducer (2)
- 1/2" Nylon T Fitting (1)
- 1/2" Fuel/PCV Hose (13")
- 1/8 NPT Stainless Plugs (4) (for DIY TGV Conversion)
- Heavy Duty 10 Inch Zip Ties (5)

**We recommend either using billet TGV Conversions or using the supplied 1/8 NPT plugs to convert the factory TGV for clearance.

***Important note: The Torque Solution inlet bypasses the PCV Diagnosis Port. You will need to perform a simple bypass.

1. Locate PCV Diagnosis connector (grey or white depending on year), which located on the block next to throttle body.
2. You will need to use a pair of needle nose pliers to remove the jumper pin inside the PCV Diagnosis connector. This pin should pull out easily only using slight pressure. Do not discard the jumper pin removed from the connector.
3. Place the jumper pin into the female harness plug that was connected to PCV diagnosis connector. Use electrical tape to secure in place.

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

Torque Solution Turbo Inlet Hose Black (Non-Recirc): 02-07 Subaru WRX / 04-20 STI / 05-09 Legacy GT

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart

trending

Popular Products

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

Torque Solution Turbo Inlet Hose Black (Non-Recirc): 02-07 Subaru WRX / 04-20 STI / 05-09 Legacy GT

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart