Edelbrock Performer T.B.I. Intake Manifold For Chevrolet 305/350 Small-Block V8
Edelbrock Part # 3704 Performer T.B.I. intake manifold is designed for 1987-95 305/350 c.i.d. 5.0/5.7L Chevy throttle body injected (T.B.I.) engines. Accepts all OEM equipment and small-bore (1-11/16") throttle body injectors only. Will not fit Caprice or Buick and Cadillac "B" bodies.
PDF-Installation Instructions
SPECS
Manufacturer | Edelbrock |
Application | Application Specific |
UPC | 00085347037049 |
Series | Performer |
Gasket Or Seal Included | No |
Vehicle Model | Chevrolet |
Availability Note | Available to Order |
Warranty | 12 Months |
Ec Basic Operating Rpm Range | Idle-5500 RPM |
Emissions Code | |
Hazardous Materials Warning | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Installation Notes | - Use stock Throttle Body Injection unit.; Recommended intake gasket: GM #10159409.; Manifold height: A-3.70", B-5.10"; TBI pad height: 4.40", .250" taller than stock.; Port exit dimensions: 1.13" x 1.87".; Made in the USA; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
|
Finish | Satin |
Material | Aluminum |
Rear Maximum Height | 5.100 in |
Single Or Dual Plane Type | Dual |