Proudly US Veteran Founded! We strive to have the best prices and customer service in the industry.
×
-9%
Banks Power 08-10 Ford 6.4L Techni-Cooler System - eliteracefab.com
Banks Power 08-10 Ford 6.4L Techni-Cooler System - eliteracefab.com
Banks Power 08-10 Ford 6.4L Techni-Cooler System - eliteracefab.com
Banks Power 08-10 Ford 6.4L Techni-Cooler System - eliteracefab.com
Banks Power 08-10 Ford 6.4L Techni-Cooler System - eliteracefab.com
Click to zoom in

Banks Power 08-10 Ford 6.4L Techni-Cooler System

2 sold in last 8 hours
Banks Power
GBE25984
In stock
Intercooler Kits
$2,205.22 $1,984.70
Eliminates restrictions, dramatically increasing the cooling capacity for massive continuous power. Big aluminum end tanks won't burst like the plastic stock ones. Techni-Cooler dramatically increases the cooling capacity by balancing...

Banks Power 08-10 Ford 6.4L Techni-Cooler System
Eliminates restrictions, dramatically increasing the cooling capacity for massive continuous power. Big aluminum end tanks won't burst like the plastic stock ones. Techni-Cooler dramatically increases the cooling capacity by balancing the richer fuel mixture with greater airflow and cooler, denser air. Denser air has more oxygen, which improves combustion as well as engine efficiency. Result: higher continuous power and more power at any exhaust gas temp (EGT), better fuel economy and lower EGTs. That's a truckload of benefits! Banks Techni-Cooler delivers the maximum reduction in boost air temperature with a minimal loss of boost pressure. It doesn't get any cooler than Techni-Cooler ! Banks Techni-Cooler for the 6.4L Power Stroke produces quicker throttle response, higher continuous power at any exhaust gas temperature, better economy and a more reliable rig. It's the best aftermarket improvement you can make, especially if you climb steep hills or do heavy-duty towing. Built to win. Our Techni-Cooler s for the 6.4L Power Stroke are built right from the start with high-flow streamlined cast aluminum end tanks, and formed tube construction for better air flow to other vital cooling systems. We could have used welded up sheet aluminum end tanks and crude bar-and-plate cores like the other guys, but that's just cheap, shoddy backyard construction. It's not good engineering and it's not the way we do things at Banks. A Better bargain, too. Compare prices and you'll see that even with its vastly superior construction and performance, Techni-Cooler is priced lower than many of our competitors. Put it all together, engineering, efficiency, economy and you'll see that going with Banks Techni-Cooler is hands down the best choice.

This Part Fits:

Year Make Model Submodel
2009-2010 Ford F-250 Super Duty Cabela's
2008-2009 Ford F-250 Super Duty FX4
2008-2010 Ford F-250 Super Duty Harley-Davidson Edition
2008-2010 Ford F-250 Super Duty King Ranch
2008-2010 Ford F-250 Super Duty Lariat
2008-2010 Ford F-250 Super Duty XL
2008-2010 Ford F-250 Super Duty XLT
2009-2010 Ford F-350 Super Duty Cabela's
2008-2009 Ford F-350 Super Duty FX4
2008-2010 Ford F-350 Super Duty Harley-Davidson Edition
2008-2010 Ford F-350 Super Duty King Ranch
2008-2010 Ford F-350 Super Duty Lariat
2008-2010 Ford F-350 Super Duty XL
2008-2010 Ford F-350 Super Duty XLT
2009-2010 Ford F-450 Super Duty Harley-Davidson Edition
2009-2010 Ford F-450 Super Duty King Ranch
2009-2010 Ford F-450 Super Duty Lariat
2009-2010 Ford F-450 Super Duty XL
2009-2010 Ford F-450 Super Duty XLT
2008-2010 Ford F-550 Super Duty Lariat
2008-2010 Ford F-550 Super Duty XL
2008-2010 Ford F-550 Super Duty XLT
Read More
Read Less

Testimonials

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.

James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.

Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

FAQs

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×