Belltech 2021+ Ford Bronco 4WD w/o Sasquatch Package; 4-7.5" Front Only Lifting Coilover Kit - Front

Need the ultimate in ride quality, handling, and ride height adjustability? Belltech coilover systems are the answer, providing complete height adjustable replacement shocks and springs in an application specific complete coilover unit. Belltech now offers a complete solution for the front end of your strut equipped Truck or SUV. Increase grip, reduce body roll, all while retaining the daily driven comfort you require. Each kit consists of two threaded large 60mm body performance dampers with the option of independent compression and rebound damping force adjustability. Belltech coilovers come preassembled with matched performance coil springs, Aluminum spring perches, progressive rate open cell bump stops, and plastic dust boots.

The new Ford Broncos are the total package, showcasing a stunning appearance and incredible capability. One of the Bronco's most alluring features is its easy customization and ability to make your adventure vehicle truly unique with perfected adaptation to your lifestyle. At Belltech we took Ford Bronco customization even further by designing specially tuned coilovers that truly take your Ford to new heights, in more ways than one. Our 15326 front coilovers pair with their rear counterparts in our 152600 complete 4" to 7.5" lift kits. This much lift results in a dramatically aggressive, highly appealing look. In addition to turning heads, your Ford will also gain ample amounts of ground clearance and room for large tires and wheels, which can greatly increase your contact patch. Belltech coilovers are engineered exclusively for the vehicle they are meant to enhance and are tested in varying conditions, so when we say our coilovers will improve vehicle safety, boost ride quality, enrich performance and give you the ultimate driving experience, it has already been proven. Belltech coilovers contain large-bodied, 2.4" (60mm) Trail Performance dampers that use a low-friction design and are preset for ideal damping. Our 35mm independent and rebound compression valves result in ideally refined low and high-speed compression. The damper bodies are constructed of galvanized steel and zinc-plated, making them quite durable and rust-resistant. For increased strength, each piston rod is 20mm in diameter and is made of hardened chrome. To create height adjustability, Belltech uses a threaded damper body and spring perch. The perch is easily moved up or down the threads and set in place exactly where it is desired. Once the coilover height is customized, it is also important to set the adjustable bump stop engagement. Belltech uses a progressive rate polymer, open-cell, bump stop, and packers to coordinate the best possible bump stop engagement. Belltech coilovers also contain a main spring and helper spring. Both springs are made of cold-formed high tensile steel and powder coated, so they are protected from dirt and debris. The linear spring is made with the most desirable spring rate for the Ford Bronco and Belltech engineers are sure to test it on a vehicle as-is and fully loaded with customized gear. The helper spring keeps tension on the main spring when the suspension is at full droop, so it stays properly seated in place. To reduce noise and vibrations, each coilover is equipped with a double wall, high durometer vulcanized rubber bushing. To keep the piston rod pristine and protect it from debris, we apply a plastic dust boot, and for easy installation, the OE top mount is used. Create the ultimate off-roading machine and be the envy of all your trail-adventuring friends with Belltech Trail Performance coilovers.

Height adjustable front lift from 4" to 7.5"
Trail Performance dampers
2.4" (60mm) damper body
20mm hardened chrome piston rod
35mm independent valves
Perfected pre-set damping and low-friction design
Progressive rate polymer, open-cell, bump stop and packers to perfect bump stop engagement
Double wall high durometer vulcanized rubber bushing
High tensile steel springs
adding clearance and room for larger tires and wheels
Enhances ride quality and performance
Easy installation
Fitment Notes: Excludes - First Edition, Wildtrak, Heritage Edition, Heritage Limited Edition and Raptor.

Please specify your vehicle to get more details and see if that product will work for you!

All related vehicles

Listing of all vehicles this part can be used with.