12
Hawk .492 Blue 9012 Rear Brake Pads For 94-05 Mazda Miata - HB159E.492
Hawk Performance Blue 9012 Designed as an entry level endurance compound, there's nothing second-string about Hawk's Blue...
Vendor:
Hawk Performance
SKU:
HAWKHB159E.492
Availability:
In Stock
Product Type:
Brake Pads - Racing
- $195.23
$216.92- $195.23
- Unit price
- per
Please hurry! Only 1 left in stock
Subtotal:
$195.23
10 customers are viewing this product
Couldn't load pickup availability
Description
xHawk Performance Blue 9012
Designed as an entry level endurance compound, there's nothing second-string about Hawk's Blue 9012 race compound. Easier to bed in and delivering excellent pad and rotor life, Blue 9012 is a medium torque pad developed specifically for Road, Rally and Circle Track racing.
Hawk Performance Blue 9012 Compound Characteristics:
- Endurance Compound
- Medium Friction
- Intermediate Initial Bite
- Increased Mid-Mu Characteristics
- 250-1000 Deg F Operating Temperature Range
- 350-800 Deg F Optimal Temperature Range
Hawk Race Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Motorsports Pads
- After reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.
- At higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.
- At or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.
- Do not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.
- If during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.
Important Reminders when Burnishing or Bedding Brake Pads
- Do not attempt to use badly worn or damaged rotors with new brake pads.
- Do not drag brakes while car is moving during break-in procedure.
- Do not engage pedal while car is stopped at any time following the break-in procedure.
- Upon completing the procedure, allow the brake system to completely cool before racing.
- Applying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.
- Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.
- Some forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.
This part is for the Rear of:
- 2005 Mazda Miata LS 1.8L OE Incl.Clips, Shims, Springs
- 2005 Mazda Miata Base 1.8L OE Incl.Clips, Springs
- 2004 Mazda Miata LS 1.8L OE Incl.Clips, Shims, Springs
- 2004 Mazda Miata Base 1.8L OE Incl.Clips, Springs
- 2003 Mazda Miata Shinsen 1.8L OE Incl.Clips, Shims, Springs
- 2003 Mazda Miata SE 1.8L OE Incl.Clips, Shims, Springs
- 2003 Mazda Miata LS 1.8L OE Incl.Clips, Shims, Springs
- 2003 Mazda Miata Base 1.8L OE Incl.Clips, Springs
- 2002 Mazda Miata SE 1.8L Pads Only
- 2002 Mazda Miata SE 1.8L OE Incl.Clips, Shims, Springs
- 2002 Mazda Miata LS 1.8L Pads Only
- 2002 Mazda Miata LS 1.8L OE Incl.Clips, Shims, Springs
- 2002 Mazda Miata Base 1.8L Pads Only
- 2002 Mazda Miata Base 1.8L OE Incl.Clips, Springs
- 2001 Mazda Miata SE 1.8L Pads Only
- 2001 Mazda Miata SE 1.8L OE Incl.Clips, Shims, Springs
- 2001 Mazda Miata LS 1.8L Pads Only
- 2001 Mazda Miata LS 1.8L OE Incl.Clips, Shims, Springs
- 2001 Mazda Miata Base 1.8L OE Incl.Clips, Springs
- 2000 Mazda Miata SE 1.8L Pads Only
- 2000 Mazda Miata SE 1.8L OE Incl.Clips, Springs
- 2000 Mazda Miata SE 1.8L OE Incl.Clips, Shims, Springs
- 2000 Mazda Miata LS 1.8L Pads Only
- 2000 Mazda Miata LS 1.8L OE Incl.Clips, Springs
- 2000 Mazda Miata Base 1.8L Pads Only
- 2000 Mazda Miata Base 1.8L OE Incl.Clips, Shims, Springs
- 1999 Mazda Miata Base 1.8L Pads Only
- 1999 Mazda Miata Base 1.8L OE Incl.Clips, Shims, Springs
- 1997 Mazda Miata Base 1.8L Pads Only
- 1997 Mazda Miata Base 1.8L OE Incl.Clips, Shims, Springs
- 1996 Mazda Miata Base 1.8L
- 1995 Mazda Miata Base 1.8L
- 1994 Mazda Miata Base 1.8L
Shipping & Return
xReturns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Related Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.