Hawk Performance HP Plus
The Hawk Performance HP Plus brake pad compound is ideal for Autocross and Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. HP Plus utilizes a unique Ferro-Carbon, High-Tech friction material that was developed and manufactured for sport driving in autocross, Solo II, and track day applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
Expert Opinion
HP Plus is popular with enthusiasts that are looking for excellent street performance or wanting take their car auto-crossing or to a track day and not have to worry about changing pads. The HP Plus will provide a very noticeable increase in brake torque and temperature range when compared to OEM pads. Usually recommended to beginners who have very little to no track experience and are looking for an upgrade over stock.
Hawk Performance HP Plus Compound Characteristics:
- Low to Mid Temperature Range
- Fade Resistant
- Smooth, Predictable Torque
- Ideal for Autocross
- 100-800 Deg F Operating Temperature Range
- 300-600 Deg F Optimal Temperature Range
Hawk Race Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Street Compounds
- Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
- Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
- DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
- Allow 15 minutes or more for the brake system to cool down.
- Your new Hawk pads are ready for use.
This part is for the Front of:
- 2005 Acura NSX Base 3.2L OE Incl.Shims
- 2005 Acura NSX Base 3.0L OE Incl.Shims
- 2004 Acura NSX Base 3.2L OE Incl.Shims
- 2004 Acura NSX Base 3.0L OE Incl.Shims
- 2003 Acura NSX T 3.2L OE Incl.Shims
- 2003 Acura NSX T 3.0L OE Incl.Shims
- 2002 Honda Accord LX 3.0L OE Incl.Shims
- 2002 Honda Accord EX 3.0L OE Incl.Shims
- 2002 Honda Accord Coupe
- 2002 Acura NSX T 3.2L OE Incl.Shims
- 2002 Acura NSX T 3.0L OE Incl.Shims
- 2001 Honda Prelude Type SH 2.2L
- 2001 Honda Prelude Base 2.2L
- 2001 Honda CR-V SE 2.0L OE Incl.Shims
- 2001 Honda CR-V LX 2.0L OE Incl.Shims
- 2001 Honda CR-V EX 2.0L OE Incl.Shims
- 2001 Honda Accord LX 3.0L OE Incl.Shims
- 2001 Honda Accord EX 3.0L OE Incl.Shims
- 2001 Honda Accord Coupe
- 2001 HONDA Accord Coupe
- 2001 Acura NSX T 3.2L OE Incl.Shims
- 2001 Acura NSX T 3.0L OE Incl.Shims
- 2001 Acura NSX Base 3.2L OE Incl.Shims
- 2001 Acura NSX Base 3.0L OE Incl.Shims
- 2001 Acura Integra 1.8L
- 2000 Honda Prelude Base 2.2L
- 2000 Honda CR-V SE 2.0L OE Incl.Shims
- 2000 Honda CR-V LX 2.0L OE Incl.Shims
- 2000 Honda CR-V EX 2.0L OE Incl.Shims
- 2000 Honda Accord LX 3.0L OE Incl.Shims
- 2000 Honda Accord EX 3.0L OE Incl.Shims
- 2000 Honda Accord Coupe
- 2000 HONDA Accord Coupe
- 2000 Acura NSX T 3.2L OE Incl.Shims
- 2000 Acura NSX Base 3.2L OE Incl.Shims
- 2000 Acura NSX Base 3.0L OE Incl.Shims
- 2000 Acura Integra
- 1999 Isuzu Oasis 2.3L
- 1999 Honda Prelude Base 2.2L
- 1999 Honda CR-V LX 2.0L
- 1999 Honda CR-V EX 2.0L
- 1999 Honda Accord LX 3.0L
- 1999 Honda Accord EX 3.0L
- 1999 Acura NSX T 3.2L OE Incl.Shims
- 1999 Acura NSX T 3.0L OE Incl.Shims
- 1999 Acura NSX Base 3.2L OE Incl.Shims
- 1999 Acura NSX Base 3.0L OE Incl.Shims
- 1999 Acura NSX Alex Zanardi Edition 3.2L OE Incl.Shims
- 1999 Acura CL Premium 3.0L Optional
- 1998 Isuzu Oasis 2.3L
- 1998 Honda Prelude Base 2.2L
- 1998 Honda Odyssey LX 2.3L
- 1998 Honda Odyssey EX 2.3L
- 1998 Honda CR-V LX 2.0L
- 1998 Honda CR-V EX 2.0L
- 1998 Honda Accord LX 3.0L
- 1998 Honda Accord EX 3.0L
- 1998 Acura TL Base 3.2L
- 1998 Acura TL Base 2.5L
- 1998 Acura RL Base 3.5L
- 1998 Acura NSX T 3.2L OE Incl.Shims
- 1998 Acura NSX T 3.0L OE Incl.Shims
- 1998 Acura NSX Base 3.2L OE Incl.Shims
- 1998 Acura NSX Base 3.0L OE Incl.Shims
- 1998 Acura Integra
- 1998 Acura CL Base 3.0L
- 1997 Isuzu Oasis S 2.2L
- 1997 Isuzu Oasis LS 2.2L
- 1997 Honda Prelude Base 2.2L
- 1997 Honda Odyssey LX 2.2L
- 1997 Honda Odyssey EX 2.2L
- 1997 Honda CR-V LX 2.0L
- 1997 Honda Accord Station Wagon
- 1997 HONDA Accord Station Wagon
- 1997 Honda Accord SE 2.2L
- 1997 Honda Accord LX 2.7L
- 1997 Honda Accord LX 2.2L
- 1997 Honda Accord EX 2.7L
- 1997 Honda Accord EX 2.2L
- 1997 Honda Accord DX 2.2L
- 1997 Acura TL Base 3.2L
- 1997 Acura TL Base 2.5L
- 1997 Acura RL Base 3.5L
- 1997 Acura NSX T 3.2L
- 1997 Acura NSX T 3.0L
- 1997 Acura NSX Base 3.2L
- 1997 Acura NSX Base 3.0L
- 1997 Acura CL Premium 3.0L
- 1997 Acura CL Base 3.0L
- 1996 Isuzu Oasis S 2.2L
- 1996 Isuzu Oasis LS 2.2L
- 1996 Honda Prelude VTEC 2.2L
- 1996 Honda Prelude Si 2.3L
- 1996 Honda Odyssey LX 2.2L
- 1996 Honda Odyssey EX 2.2L
- 1996 Honda Accord LX 2.7L
- 1996 Honda Accord LX 2.2L
- 1996 Honda Accord EX 2.7L
- 1996 Honda Accord EX 2.2L
- 1996 Honda Accord DX 2.2L
- 1996 Honda Accord 25th Anniversary Edition 2.2L
- 1996 Acura TL Base 3.2L
- 1996 Acura TL Base 2.5L
- 1996 Acura RL Base 3.5L
- 1996 Acura NSX T 3.0L
- 1996 Acura NSX Base 3.0L
- 1995 Honda Prelude VTEC 2.2L
- 1995 Honda Prelude Si 2.3L
- 1995 Honda Odyssey LX 2.2L
- 1995 Honda Odyssey EX 2.2L
- 1995 Honda Accord LX 2.7L
- 1995 Honda Accord LX 2.2L
- 1995 Honda Accord EX 2.7L
- 1995 Honda Accord EX 2.2L
- 1995 Honda Accord DX 2.2L
- 1995 Acura TL Base 2.5L
- 1995 Acura NSX T 3.0L
- 1995 Acura NSX Base 3.0L
- 1995 Acura Legend SE 3.2L 1 Piston Caliper
- 1995 Acura Legend LS 3.2L 2 Piston Caliper
- 1995 Acura Legend LS 3.2L 1 Piston Caliper
- 1995 Acura Legend L 3.2L 2 Piston Caliper
- 1995 Acura Legend L 3.2L 1 Piston Caliper
- 1995 Acura Legend GS 3.2L
- 1994 Honda Prelude VTEC 2.2L
- 1994 Honda Prelude Si 2.3L
- 1994 Honda Accord LX 2.2L
- 1994 Honda Accord EX 2.2L
- 1994 Honda Accord DX 2.2L
- 1994 Acura Vigor LS 2.5L
- 1994 Acura Vigor GS 2.5L
- 1994 Acura NSX Base 3.0L
- 1994 Acura Legend LS 3.2L 2 Piston Caliper
- 1994 Acura Legend LS 3.2L 1 Piston Caliper
- 1994 Acura Legend L 3.2L 2 Piston Caliper
- 1994 Acura Legend L 3.2L 1 Piston Caliper
- 1994 Acura Legend GS 3.2L
- 1993 Honda Prelude VTEC 2.2L
- 1993 Honda Prelude Si 2.3L
- 1993 Honda Accord SE 2.2L
- 1993 Honda Accord LX 2.2L
- 1993 Honda Accord EX 2.2L
- 1993 Honda Accord DX 2.2L
- 1993 Honda Accord 10th Anniversary 2.2L
- 1993 Acura Vigor LS 2.5L
- 1993 Acura Vigor GS 2.5L
- 1993 Acura NSX Base 3.0L
- 1993 Acura Legend LS 3.2L 2 Piston Caliper
- 1993 Acura Legend LS 3.2L 1 Piston Caliper
- 1993 Acura Legend L 3.2L 2 Piston Caliper
- 1993 Acura Legend L 3.2L 1 Piston Caliper
- 1993 Acura Legend Base 3.2L 2 Piston Caliper
- 1993 Acura Legend Base 3.2L 1 Piston Caliper
- 1992 Honda Accord LX 2.2L
- 1992 Honda Accord EX 2.2L
- 1992 Honda Accord DX 2.2L
- 1992 Acura Vigor LS 2.5L
- 1992 Acura Vigor GS 2.5L
- 1992 Acura NSX Base 3.0L
- 1992 Acura Legend LS 3.2L
- 1992 Acura Legend L 3.2L
- 1992 Acura Legend Base 3.2L
- 1991 Honda Accord SE 2.2L
- 1991 Honda Accord LX 2.2L
- 1991 Honda Accord EX 2.2L
- 1991 Honda Accord DX 2.2L
- 1991 Acura NSX Base 3.0L
- 1991 Acura Legend LS 3.2L
- 1991 Acura Legend L 3.2L
- 1991 Acura Legend Base 3.2L
Testimonials
James LoweLooks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Richard WestbrookBought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
FAQs
We are open Monday-Friday from 8am-6pm EST
Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403
Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.
We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.
As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.