The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9203 is specifically engineered for the 2015-2019 Ford Mustang with the 2.3L EcoBoost engine. Every EVO9203 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. The box has a forward facing ram air scoop to provide fresh, clean air to your engine. This intake system also includes stainless steel hardware and automotive grade urethane couplers. No cutting or drilling is required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS.
The EVO9203 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9203 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, a smooth rotational molded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9203 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can’t be stopped…..
Durable Roto-molded Housing and Boost Plenum:
The EVO9203 system features our 2-piece box design that incorporates our boost plenum. Designed in 3D ensures a hassle free, drop-in installation, this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos!
Durable Roto-molded intake tube:
The EVO9203 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. This tube utilizes our patented MR Technology for accurate fuel trims for safe power improvements and no check engine lights.
SuperNano-Web Dry Air Filter:
'That’s massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO9203 cold air intake system. Using the largest filter possible for this application has increased the available air volume, resulting in added power while keeping the installation process quick and simple.
Quality Hardware:
From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit.
Hassle-Free Installation:
Make it easy! By designing this kit in a 3D workspace, you’re ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.
Dyno Proven:
Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford Mustang Ecoboost. After hours of designing and dyno testing, Injen is proud to say that the EVO9203 Evolution Air Intake system puts down numbers of up to 21 additional horsepower and 21 Ft.-lbs. of torque.
- Direct Fit for 2015-2019 Ford Mustang L4-2.3L EcoBoost
- Dyno Proven gains of up to 15 hp and 16 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded Polyethylene housing and intake tube
- Fully functioning, forward facing ram air scoop
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter part number X-1130-BB
- Stainless steel band clamps with inner protective liner
- Aggressive under hood appearance while maintaining an OE fit
- Made in Pomona California, USA
- Injen Technology Limited Lifetime Warranty
Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
Fitment
2015-2019 Ford Mustang L4-2.3L Turbo
Instructions
Dyno Sheet
EVO9203 Installation Instructions
Shipping
Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States (Does not include HI/PR/AK/GU) on qualifying orders! Orders that do not qualify for free shipping will be subject to a shipping charge during checkout. Some exceptions are Freight and Non-EPA compliant items. Please check the product description or shipping option to see if this product can be shipped to a CA address or requires an additional freight shipping option. If the product does require a freight option, please select the shipping option during checkout or wait to get an invoice within 24-48 hrs prior to your order being placed. Thank you!
As for delivery times, generally speaking all items can arrive to any US address within 2-6 business days with Free Economy Shipping(to any Continental US address)for all qualifying orders. In the event that you would like to get your items faster, please select one of our faster options such as UPS/Fedex Ground (3-5 Days) , UPS/Fedex 3 Day Air, UPS/Fedex 2nd Day Air, UPS/Fedex Next Day Air or any of the USPS options to your address. All shipping prices displayed are at our cost. We get insanely good shipping rates due to the volume of packages we ship daily, and we pass this savings directly to our customer.
NOT CARB-APPROVED. ILLEGAL TO USE OR INSTALL IN CALIFORNIA. IF YOU LIVE IN CA, WE CANNOT SHIP YOU THIS ITEM AND YOU WILL BE CHARGED A 10% CANCELLATION FEE IF YOU ORDER. PLEASE LOOK FOR OTHER PRODUCTS WITH CARB APPROVAL.
