Proudly US Veteran Owned since 2019! We strive to have the best prices and customer service in the industry.
×
-10%
Hawk Performance HPS 5.0 Front Brake Pads - HB178B.564
Click to zoom in

Hawk Performance HPS 5.0 Front Brake Pads - HB178B.564

2 sold in last 8 hours
HAWKHB178B.564
In stock
Ferro-carbon
$184.99 $166.49
Hawk Performance HPS 5.0 For years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS...

Hawk Performance HPS 5.0 Front Brake Pads - HB178B.564

Hawk Performance HPS 5.0

For years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.

Expert Opinion

The Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.

Hawk HPS 5.0 Compound Characteristics:

  • Aggressive Torque
  • Great Rotor and Pad Wear
  • Smooth, Predictable Control
  • High Rates of Deceleration
  • Consistent Release Characteristics
  • 100-750 Deg F Operating Temperature Range
  • 100-550 Deg F Optimal Temperature Range

 

Compound Chart

Hawk Performance HPS 5.0 Chart

Hawk Brake Pad Installation Procedure

  • Install Brake pads properly. Be sure pads are securely positioned in the caliper.
  • Flush system with fresh brake fluid.
  • Check all hydraulic parts for excess wear and tear.
  • Check disc for proper thickness, parallelism, and lateral run-out.
  • Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
  • If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
  • Inspect calipers for freedom of movement. Lubricate where necessary

 

Hawk Brake Pad Bedding Procedure - Street Compounds

  • Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
  • Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
  • DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
  • Allow 15 minutes or more for the brake system to cool down.
  • Your new Hawk pads are ready for use.

This part is for the Front of:

  • 1996 Nissan 300ZX Base 3.0L
  • 1996 Nissan 300ZX 2+2 3.0L
  • 1995 Nissan 300ZX Base 3.0L
  • 1995 Nissan 300ZX 2+2 3.0L
  • 1994 Nissan 300ZX Base 3.0L
  • 1994 Nissan 300ZX 2+2 3.0L
  • 1993 Nissan 300ZX Base 3.0L
  • 1993 Nissan 300ZX 2+2 3.0L
  • 1993 Nissan 300ZX
  • 1992 Nissan 300ZX Base 3.0L
  • 1992 Nissan 300ZX 2+2 3.0L
  • 1992 Nissan 300ZX
  • 1991 Nissan 300ZX Base 3.0L
  • 1991 Nissan 300ZX 2+2 3.0L
  • 1991 Nissan 300ZX
  • 1990 Nissan 300ZX Base 3.0L
  • 1990 Nissan 300ZX 2+2 3.0L
  • 1990 Nissan 300ZX
Read More
Read Less

Testimonials

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.

James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.

Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

FAQs

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×