Edelbrock RPM 61-79 Big-Block Chrysler 75cc Cylinder Head Hydraulic Flat Tappet Cam - 60829

Click to zoom in

Load image into Gallery viewer, Edelbrock RPM 61-79 Big-Block Chrysler 75cc Cylinder Head Hydraulic Flat Tappet Cam - 60829

Edelbrock RPM 61-79 Big-Block Chrysler 75cc Cylinder Head Hydraulic Flat Tappet Cam - 60829

Name: Edelbrock RPM 61-79 Big-Block Chrysler 75cc Cylinder Head Hydraulic Flat Tappet Cam - 60829
Brand: Edelbrock
SKU: EDE60829
Price: 991.95 USD
Availability: InStock

2 sold in last 8 hours

Brand: Edelbrock

SKU: EDE60829

availability: In stock

Product Code: Heads

$991.95

The Edelbrock #60829 Performer RPM cylinder heads are designed for 1961-79 Chrysler 361-440 Wedge engines. The #60829 Performer RPM heads are perfect for street performance, daily drivers and muscle cars...

Quantity

Quantity must be 1 or more

Description

Description

The Edelbrock #60829 Performer RPM cylinder head is designed for 1961-79 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock #60829 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

PDF-Installation Instructions

SPECS

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347608294
Series	Performer RPM
Grade Type	Performance
Quantity	Sold Individually
Camshaft Type	Flat Tappet
Horsepower	450-575 HP
Availability Note	Available to Order
Warranty	12 Months
Seat Angle	Exhaust 45 deg/Intake 45 deg
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	EQUIPPED WITH SPRINGS FOR USE IN HYDRAULIC FLAT TAPPET CAMSHAFT APPLICATIONS; Cylinder heads flow 291 cfm on the intake and 217 cfm on the exhaust at .600" lift; Angled spark plugs for superior combustion; 88cc chambers are machined .100" for clearance with quench dome style pistons; For headers, contact TTI (951) 371-4878.; Vacuum advance distributor may not clear cylinder head.; Deck thickness: 5/8"; Pushrod diameter: 3/8"
Intake Valve Diameter	2.14 in
Intake Runner Volume	210 cc
Material	Aluminum
Push Rod Diameter	(Suggested) 0.375 in
Valve Angle	15 deg
Valve Spring Diameter	1.55 in
Valve Spring Maximum Lift	0.600 in
Valve Stem Diameter	0.3438 in

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

Edelbrock RPM 61-79 Big-Block Chrysler 75cc Cylinder Head Hydraulic Flat Tappet Cam - 60829

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart

trending

Popular Products

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

Edelbrock RPM 61-79 Big-Block Chrysler 75cc Cylinder Head Hydraulic Flat Tappet Cam - 60829

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart