Proudly US Veteran Founded! We strive to have the best prices and customer service in the industry.
×
-10%
Sold out
Hawk Performance DTC-80 Brake Pads - HB141Q.650
Hawk DTC-80 91-94 Porsche 911 Rear / 94-98 Porsche 911 Front / 86-91 Porsche 928 - eliteracefab.com
Click to zoom in

Hawk Performance DTC-80 Brake Pads - HB141Q.650

2 sold in last 8 hours
HAWKHB141Q.650
Out of stock
Ferro-carbon
$491.99 $442.79
Hawk Performance DTC-80 Hawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest...

Hawk Performance DTC-80 Brake Pads - HB141Q.650

Hawk Performance DTC-80

Hawk Performance products have dominated motorsports for more than 25 years, and this revolutionary compound is taking that domination to a new level. Intended for the hardest braking circuits where the most demanding brake products are required, Hawk DTC-80 is a compound engineered for use on all circle track and road racing venues where a high torque, high temperature-resilient friction material is a must. With a formulated flat coefficient of friction at high temperature levels, DTC-80 provides consistent performance corner after corner. Track tested and proven effective, this formulation offers lower wear rates and higher torque values than other competitive materials on the market today. The end results are better car control, more confident brake zone feel, and stunningly predictable performance.

Expert Opinion

The DTC-80 has a higher temperature and generates more brake torque than the DTC-70. If you have been over-heating the DTC-70 or it is not giving you the torque you need, give the DTC-80 a try.

Hawk Performance DTC-80 Race Compound Characteristics:

  • High Initial Bite
  • High Torque
  • Consistent Brake Torque over Temperature Range
  • Superior pad and Rotor Wear
  • Applicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks
  • 500-1700 Deg F Operating Temperature Range
  • 600-1500 Deg F Optimal Temperature Range

 

Hawk Race Compound Chart

Hawk Performance Race Compound Chart
Hawk Performance DTC-80 Characteristics

Hawk Brake Pad Installation Procedure

  • Install Brake pads properly. Be sure pads are securely positioned in the caliper.
  • Flush system with fresh brake fluid.
  • Check all hydraulic parts for excess wear and tear.
  • Check disc for proper thickness, parallelism, and lateral run-out.
  • Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
  • If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
  • Inspect calipers for freedom of movement. Lubricate where necessary

 

Hawk Brake Pad Bedding Procedure - Motorsports Pads

  • After reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.
  • At higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.
  • At or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.
  • Do not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.
  • If during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.

 

Important Reminders when Burnishing or Bedding Brake Pads

  • Do not attempt to use badly worn or damaged rotors with new brake pads.
  • Do not drag brakes while car is moving during break-in procedure.
  • Do not engage pedal while car is stopped at any time following the break-in procedure.
  • Upon completing the procedure, allow the brake system to completely cool before racing.
  • Applying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.
  • li>Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads
  • Some forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.

This part is for the Front of:

  • 1998 Porsche 911 Targa 3.6L
  • 1998 Porsche 911 Carrera S 3.6L
  • 1998 Porsche 911 Carrera 4 3.6L
  • 1998 Porsche 911 Carrera 3.6L
  • 1997 Porsche 911 Targa 3.6L
  • 1997 Porsche 911 Carrera Targa
  • 1997 Porsche 911 Carrera 4 3.6L
  • 1997 Porsche 911 Carrera 3.6L
  • 1997 Porsche 911 Carrera 2
  • 1996 Porsche 911 Targa 3.6L
  • 1996 Porsche 911 Carrera Targa
  • 1996 Porsche 911 Carrera 4 3.6L
  • 1996 Porsche 911 Carrera 3.6L
  • 1995 Porsche 968 Base 3.0L 4 Piston Caliper
  • 1995 Porsche 968
  • 1995 Porsche 911 Carrera 4 3.6L
  • 1995 Porsche 911 Carrera 3.6L
  • 1995 Porsche 911 Carrera 2
  • 1994 Porsche 968 Base 3.0L 4 Piston Caliper
  • 1994 Porsche 968
  • 1994 Porsche 911 Carrera 4 3.6L
  • 1994 Porsche 911 Carrera 2 3.6L
  • 1993 Porsche 968 Base 3.0L 4 Piston Caliper
  • 1993 Porsche 968
  • 1993 Porsche 911 Turbo
  • 1992 Porsche 968 Base 3.0L 4 Piston Caliper
  • 1992 Porsche 968
  • 1992 Porsche 911 Turbo 3.3L
  • 1991 Porsche 928 GT 5.0L
  • 1991 Porsche 928 Base 5.0L 4 Piston Caliper
  • 1991 Porsche 928
  • 1991 Porsche 911 Turbo 3.3L
  • 1991 Porsche 911 Turbo
  • 1991 Porsche 911 Carrera 2 3.6L
  • 1991 Porsche 911
  • 1990 Porsche 944 S2 3.0L
  • 1990 Porsche 944
  • 1990 Porsche 928 GT 5.0L 4 Piston Caliper
  • 1990 Porsche 928 Base 5.0L 4 Piston Caliper
  • 1990 Porsche 928
  • 1990 Porsche 911 Carrera 2 3.6L
  • 1990 Porsche 911 Carrera
  • 1989 Porsche 928 S4 5.0L
  • 1989 Porsche 928
  • 1988 Porsche 928 S4 5.0L
  • 1988 Porsche 928
  • 1987 Porsche 928 S4 5.0L
  • 1987 Porsche 928
  • 1986 Porsche 928 S 5.0L
  • 1986 Porsche 928

This part is for the Rear of:

  • 1998 Porsche 911 Carrera 4S 3.6L
  • 1997 Porsche 911 Turbo 3.6L
  • 1997 Porsche 911 Carrera 4S 3.6L
  • 1996 Porsche 911 Turbo 3.6L
  • 1996 Porsche 911 Carrera 4S 3.6L
Read More
Read Less

Testimonials

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.

James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.

Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.

Luca Harris

FAQs

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×