BD Diesel Torquemaster Dodge 68RFE Transmission & Converter Package - 2007.5-2018 4wd C/w Billet Input Shaft - 1064264BM BD Diesel

Click to zoom in

Load image into Gallery viewer, BD Diesel Torquemaster Dodge 68RFE Transmission & Converter Package - 2007.5-2018 4wd C/w Billet Input Shaft - 1064264BM BD Diesel

BD Diesel Torquemaster Dodge 68RFE Transmission & Converter Package - 2007.5-2018 4wd C/w Billet Input Shaft - 1064264BM

Name: BD Diesel Torquemaster Dodge 68RFE Transmission & Converter Package - 2007.5-2018 4wd C/w Billet Input Shaft - 1064264BM
Brand: BD Diesel
SKU: BDD1064264BM
Price: 8019.00 USD
Availability: InStock

2 sold in last 8 hours

Brand: BD Diesel

SKU: BDD1064264BM

availability: In stock

Product Code: Transmissions

$8,019.00

Quantity

Quantity must be 1 or more

Description

Description

When you purchase a BD transmission and torque converter package, you are getting a matched set that has been dyno tested together for ultimate performance, and reliability. Every transmission comes with BD's own Heavy Duty pan that adds extra fluid capacity. For towing, street or track, when it comes to a dependable transmission that will stand up to your diesel's power and torque demands, the clear choice is BD.

REQUIRES $2,800.00 USD REFUNDABLE CORE DEPOSIT

*Requires additional chargers for Freight shipping you will be contacted and sent a invoice for this shipping at our cost* (If you try to deny these charges you will be charged a cancellation fee)

FEATURES

TRANSMISSION:

Hard anodized valve body and new solenoid pack installed in every unit
Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
Heavy duty cam & roller design low reverse one way clutch
New 4C billet spring retainer
Steel girdle added to 2C piston to allow for more clutches and broader apply area
BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
Over Drive clutches 33% increase & 2C clutches 33% increase
Custom Big Stack overdrive shaft
BD reinforced accumulator plate
TCC limit valve machined and sleeved to address high wear area with in pump
BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
BD ProTech68 pressure control module ramps up line pressure to 250 psi using MAP sensor to input load and adjust pressure required

PROFORCE 3D TORQUE CONVERTER:

Triple Disc
Enhanced Stall - Street/Towing applications
HD springs absorb shock of engagement
Stamp forged 1-piece cover
Eliminates warpage from clutch heat
Taller cover can be rebuilt more often
Trapezoid teeth design
Engineered tighter tolerances
Self-centering trapezoid teeth design increases contact decreases wear and chatter
Thrust bearings - not plastic thrust washers
Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
Cast stator designs maximizes torque
New sprag components ensure long term durability
Furnaced brazed turbine fins for improved fluid coupling efficiency
Reduced overall weight by 12lbs compared to competitors

PROFORCE TORQUE CONVERTER:

Enhanced Stall - Street/Towing applications
Torque multiplying cast aluminum stators
Lower rpm response than the stock converter
More efficient operation
Less heat and better fuel economy
Stamp-forged steel front cover
Furnace-brazed fins

INSTALL TIME

9 Hours

WARRANTY

Parts

36-Months
150,000 Miles

Labour

12-Months
24,000 miles

Note

No Race abuse covered. Remote filter required for inspection with cooler flow rate in GPM at Oil/Air transmission cooler outlet.

EMISSIONS

This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)

VIDEOS

68RFE EXPLAINED! VALVE BODY

HOW TO: 68REF RELEARN

BD DIESEL 68RFE BIG STACK EXPLAINED

TRANSMISSION SHOP WALKTHROUGH

68RFE TRANSMISSION RELEARN

This Part Fits:

Year	Make	Model	Submodel
2007-2010	Dodge	Ram 2500	Laramie
2007-2010	Dodge	Ram 2500	SLT
2007-2010	Dodge	Ram 2500	ST
2008-2010	Dodge	Ram 2500	SXT
2010	Dodge	Ram 2500	TRX
2007-2010	Dodge	Ram 3500	Laramie
2007-2010	Dodge	Ram 3500	SLT
2007	Dodge	Ram 3500	Sport
2007-2010	Dodge	Ram 3500	ST
2008-2010	Dodge	Ram 3500	SXT
2013-2018	Ram	2500	Big Horn
2011-2018	Ram	2500	Laramie
2014-2015	Ram	2500	Laramie Limited
2011-2018	Ram	2500	Laramie Longhorn
2016-2018	Ram	2500	Limited
2013-2015	Ram	2500	Lone Star
2012-2016	Ram	2500	Outdoorsman
2011-2018	Ram	2500	SLT
2011-2013	Ram	2500	ST
2013-2018	Ram	2500	Tradesman
2013-2018	Ram	3500	Big Horn
2011-2018	Ram	3500	Laramie
2014-2015	Ram	3500	Laramie Limited
2011-2018	Ram	3500	Laramie Longhorn
2016-2018	Ram	3500	Limited
2013-2015,2017	Ram	3500	Lone Star
2011-2018	Ram	3500	SLT
2011-2013	Ram	3500	ST
2013-2018	Ram	3500	Tradesman

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST