Features Upgraded 68RFE Accumulator Plate 56% more theoretical holding power Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks Heavy duty accumulator plate to...
Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
Heavy duty accumulator plate to prevent accumulator blowout
Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
Dynamic control ramps up the much larger sweep
Prevent clutch slippage
Kit includes pan gasket, 3 doughnut seals and check ball
Installation takes 2-to-3 hours
No full transmission relearn required - quick relearn suggested
A "fresh" stock transmission will have the ability to handle up to 400hp-450hp
No tuning required
ABOUT THIS PRODUCT
ProTect68 Trans Pressure Control kit delivers 150% of the torque holding force to stock transmissions like no others can. Industry leading custom bonded gasket valve body separator plate and gaskets substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures. Heavy duty accumulator plate to prevent accumulator blow-out. Electronic Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% of the holding force prevents clutch slippage. All of this without modifying the transmission pump or removing the transmission. Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/engine load. No tuning required. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 450hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.
INSTALL TIME
3 Hours
WARRANTY
Parts
12-Months
24,000 Miles
NOTE
This kit is not to be used with transmission pressure tuning. If you have transmission pressure tuning already, use part number 1030373 instead.
EMISSIONS
This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)
Features
Upgraded 68RFE Accumulator Plate
56% more theoretical holding power
Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
Heavy duty accumulator plate to prevent accumulator blowout
Pressure Control module delivers up to 250psi clutch apply pressure at full throttle
Dynamically adjusts hydraulic apply pressures based on turbo boost/engine load
Dynamic control ramps up the much larger sweep
Prevent clutch slippage
Kit includes pan gasket, 3 doughnut seals and check ball
Installation takes 2-to-3 hours
No full transmission relearn required - quick relearn suggested
A "fresh" stock transmission will have the ability to handle up to 400hp-450hp
No tuning required
ABOUT THIS PRODUCT
ProTect68 Trans Pressure Control kit delivers 150% of the torque holding force to stock transmissions like no others can. Industry leading custom bonded gasket valve body separator plate and gaskets substantially reduces cross leaks compared to stock and other aftermarket kits, even with much higher line pressures. Heavy duty accumulator plate to prevent accumulator blow-out. Electronic Pressure Control module that delivers up to 250 PSI clutch apply pressure providing 150% of the holding force prevents clutch slippage. All of this without modifying the transmission pump or removing the transmission. Controller dynamically adjusts the hydraulic apply pressures based on turbo boost/engine load. No tuning required. Installation takes 2-to-3 hours to complete without having to do a full transmission relearn since no internal tolerances have changed. A "fresh" stock transmission will have the ability to handle up to 450hp. For higher power or demands, a complete BD 68RFE transmission with additional clutches and new designed components is recommended.
INSTALL TIME
3 Hours
WARRANTY
Parts
12-Months
24,000 Miles
NOTE
This kit is not to be used with transmission pressure tuning. If you have transmission pressure tuning already, use part number 1030373 instead.
EMISSIONS
This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. (EMS:4)
Speak with an Expert
