Hawk Performance DTC-30
DTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.
Expert Opinion
In addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.
Hawk Performance DTC-30 Race Compound Characteristics:
- Consistent, Smooth Braking
- Effective when Cold
- 100-1200 Deg F Operating Temperature Range
- 100-800 Deg F Optimal Temperature Range
Hawk Race Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Motorsports Pads
- After reaching medium speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat four or five times.
- At higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat five times.
- At or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes. Repeat three times. Allow a few seconds between brake engagements while car is in motion.
- Do not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.
- If during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes. Do not hold brake pedal.
Important Reminders when Burnishing or Bedding Brake Pads
- Do not attempt to use badly worn or damaged rotors with new brake pads.
- Do not drag brakes while car is moving during break-in procedure.
- Do not engage pedal while car is stopped at any time following the break-in procedure.
- Upon completing the procedure, allow the brake system to completely cool before racing.
- Applying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds. li>Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads
- Some forms of racing do not allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.
This part is for the Rear of:
- 2020 Porsche 718 Cayman T 2.0L Exc.Ceramic Composite Brakes
- 2020 Porsche 718 Cayman S 2.5L Exc.Ceramic Composite Brakes
- 2020 Porsche 718 Cayman Base 2.0L Exc.Ceramic Composite Brakes
- 2020 Porsche 718 Boxster T 2.0L Exc.Ceramic Composite Brakes
- 2020 Porsche 718 Boxster S 2.5L Exc.Ceramic Composite Brakes
- 2020 Porsche 718 Boxster Base 2.0L Exc.Ceramic Composite Brakes
- 2019 Porsche 718 Cayman S 2.5L
- 2019 Porsche 718 Cayman GTS 2.5L
- 2019 Porsche 718 Cayman Base 2.0L
- 2019 Porsche 718 Boxster S 2.5L
- 2019 Porsche 718 Boxster GTS 2.5L
- 2019 Porsche 718 Boxster Base 2.0L
- 2018 Porsche 718 Cayman S 2.5L Exc.Ceramic Composite Brakes
- 2018 Porsche 718 Cayman GTS 2.5L Exc.Ceramic Composite Brakes
- 2018 Porsche 718 Boxster S 2.5L Exc.Ceramic Composite Brakes
- 2018 Porsche 718 Boxster GTS 2.5L Exc.Ceramic Composite Brakes
- 2018 Porsche 718 Boxster Base 2.0L Exc.Ceramic Composite Brakes
- 2017 Porsche 718 Cayman S 2.5L Exc.Ceramic Composite Brakes
- 2017 Porsche 718 Cayman
- 2017 Porsche 718 Boxster S 2.5L Exc.Ceramic Composite Brakes
- 2017 Porsche 718 Boxster Base 2.0L Exc.Ceramic Composite Brakes
- 2017 Porsche 718 Boxster
- 2016 Porsche Cayman S 3.4L Exc.Ceramic Composite Brakes
- 2016 Porsche Cayman GTS 3.4L
- 2016 Porsche Cayman Black Edition 2.7L Exc.Ceramic Composite Brakes
- 2016 Porsche Cayman Base 2.7L Exc.Ceramic Composite Brakes
- 2016 Porsche Cayman
- 2016 Porsche Boxster S 3.4L Exc.Ceramic Composite Brakes
- 2016 Porsche Boxster GTS 3.4L
- 2016 Porsche Boxster Black Edition 2.7L Exc.Ceramic Composite Brakes
- 2016 Porsche Boxster Base 2.7L Exc.Ceramic Composite Brakes
- 2016 Porsche Boxster
- 2015 Porsche Cayman S 3.4L Exc.Ceramic Composite Brakes
- 2015 Porsche Cayman GTS 3.4L
- 2015 Porsche Cayman Base 2.7L Exc.Ceramic Composite Brakes
- 2015 Porsche Cayman
- 2015 Porsche Boxster S 3.4L Exc.Ceramic Composite Brakes
- 2015 Porsche Boxster GTS 3.4L
- 2015 Porsche Boxster Base 2.7L Exc.Ceramic Composite Brakes
- 2015 Porsche Boxster
- 2014 Porsche Cayman S 3.4L Exc.Ceramic Composite Brakes
- 2014 Porsche Cayman Base 2.7L Exc.Ceramic Composite Brakes
- 2014 Porsche Cayman
- 2014 Porsche Boxster S 3.4L Exc.Ceramic Composite Brakes
- 2014 Porsche Boxster Base 2.7L Exc.Ceramic Composite Brakes
- 2014 Porsche Boxster
- 2013 Porsche Boxster S 3.4L Exc.Ceramic Composite Brakes
- 2013 Porsche Boxster Base 2.7L Exc.Ceramic Composite Brakes
- 2013 Porsche Boxster
- 2012 Porsche Cayman R 3.4L Exc.Ceramic Composite Brakes
- 2012 Porsche Cayman Base 2.9L
- 2012 Porsche Cayman 2.9L
- 2012 Porsche Boxster Base 2.9L
- 2012 Porsche Boxster 2.9L
- 2011 Porsche Cayman Base 2.9L
- 2011 Porsche Cayman
- 2011 Porsche Boxster Spyder 3.4L Exc.Ceramic Composite Brakes
- 2011 Porsche Boxster Base 2.9L
- 2011 Porsche Boxster
- 2010 Porsche Cayman Base 2.9L
- 2010 Porsche Cayman
- 2010 Porsche Boxster Base 2.9L
- 2010 Porsche Boxster
- 2009 Porsche Cayman S 3.4L Exc.Ceramic Composite Brakes
- 2009 Porsche Cayman Base 2.9L
- 2009 Porsche Cayman
- 2009 Porsche Boxster S Porsche Design 2 3.4L Exc.Ceramic Composite Brakes
- 2009 Porsche Boxster S 3.4L Exc.Ceramic Composite Brakes
- 2009 Porsche Boxster Base 2.9L
- 2009 Porsche Boxster 3.4L
- 2009 Porsche Boxster
- 2008 Porsche Cayman Base 2.7L
- 2008 Porsche Cayman
- 2008 Porsche Boxster Limited Edition 2.7L
- 2008 Porsche Boxster Base 2.7L
- 2008 Porsche Boxster
- 2007 Porsche Cayman Base 2.7L
- 2007 Porsche Cayman
- 2007 Porsche Boxster Base 2.7L
- 2007 Porsche Boxster
- 2006 Porsche Boxster Base 2.7L
- 2006 Porsche Boxster
- 2005 Porsche Boxster Base 2.7L
- 2005 Porsche Boxster
- 2005 Porsche 911 Carrera 997
Testimonials
James LoweLooks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Richard WestbrookBought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
FAQs
We are open Monday-Friday from 8am-6pm EST
Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403
Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.
We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.
As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.