Hawk Performance SuperDuty
For over 25 years, Hawk Performance has developed friction solutions for some of the largest trucks on the planet. Our products are used by both OE and aftermarket companies servicing the mining, construction, military and commercial truck markets. The Hawk SuperDuty compound uses that same high performance, severe-duty friction technology. The unique Ferro-Carbon material in SuperDuty brake pads delivers extremely high fade resistance with superior high-temperature rotor and brake pad wear. This compound has been engineered for Class 2 and higher, on-highway, commercial-grade vehicles.
Expert Opinion
The Hawk SuperDuty compound is a great choice for heavy duty vehicles (3/4 ton and up) that are either towing or looking for the best braking performance offered for their vehicle. The SuperDuty will generate some brake dust, but will also stop your large heavy load without worry. Some smaller vehicles with undersized brake systems will also benefit for the Superduty compound if the OEM brkae pads are consistently being over heated. If your primary concern is towing, choose the SuperDuty.
Hawk SuperDuty Compound Characteristics:
- Technology Used in Heavy-Duty Highway and Military Applications
- Extremely High Coefficient of Friction and Fade Resistance
- Recommended for Fleets and Light Trucks Towing Large Payloads
- Excellent Pad and Rotor Life
- 100-750 Deg F Operating Temperature Range
- 100-500 Deg F Optimal Temperature Range
Compound Chart
Hawk Brake Pad Installation Procedure
- Install Brake pads properly. Be sure pads are securely positioned in the caliper.
- Flush system with fresh brake fluid.
- Check all hydraulic parts for excess wear and tear.
- Check disc for proper thickness, parallelism, and lateral run-out.
- Check disc for scoring or grooves over .012"" depth. If either applies, resurfacing or replacement is required.
- If disc does not need resurfacing then contamination from the previous brake pads must be removed. Sand discs with Garnet sandpaper using moderate pressure. Use soap and water to clean off disc surface after sanding and machining. Discs should be free and clear of oil, grease, and brake fluid
- Inspect calipers for freedom of movement. Lubricate where necessary
Hawk Brake Pad Bedding Procedure - Street Compounds
- Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
- Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
- DO NOT DRAG THE BRAKES! (after stopping - do not leave your foot on the brake pedal)
- Allow 15 minutes or more for the brake system to cool down.
- Your new Hawk pads are ready for use.
This part is for the Rear of:
- 2020 Ram 3500 Tradesman Cab & Chassis 6.7L OE Incl.Clips
- 2020 Ram 3500 Tradesman 6.7L OE Incl.Clips
- 2020 Ram 3500 Tradesman 6.4L OE Incl.Clips
- 2020 Ram 3500 SLT Cab & Chassis 6.7L OE Incl.Clips
- 2020 Ram 3500 SLT 6.7L OE Incl.Clips
- 2020 Ram 3500 SLT 6.4L OE Incl.Clips
- 2020 Ram 3500 Limited Cab & Chassis 6.7L OE Incl.Clips
- 2020 Ram 3500 Limited 6.7L OE Incl.Clips
- 2020 Ram 3500 Limited 6.4L OE Incl.Clips
- 2020 Ram 3500 Laramie Cab & Chassis 6.7L OE Incl.Clips
- 2020 Ram 3500 Laramie 6.7L OE Incl.Clips
- 2020 Ram 3500 Laramie 6.4L OE Incl.Clips
- 2020 Ram 3500 Automatic Trans
- 2019 Ram 3500 Tradesman Single Rear Wheels 6.4L OE Incl.Clips
- 2019 Ram 3500 Tradesman Exc.Cab & Chassis, Single Rear Wheels 6.7L OE Incl.Clips
- 2019 Ram 3500 Tradesman Exc.Cab & Chassis, Dual Rear Wheels 6.7L OE Incl.Clips, Optional
- 2019 Ram 3500 Tradesman Cab & Chassis 6.7L OE Incl.Clips
- 2019 Ram 3500 Tradesman 6.4L OE Incl.Clips
- 2019 Ram 3500 SLT Single Rear Wheels 6.4L OE Incl.Clips
- 2019 Ram 3500 SLT Exc.Cab & Chassis, Single Rear Wheels 6.7L OE Incl.Clips
- 2019 Ram 3500 SLT Exc.Cab & Chassis, Dual Rear Wheels 6.7L OE Incl.Clips, Optional
- 2019 Ram 3500 SLT Cab & Chassis 6.7L OE Incl.Clips
- 2019 Ram 3500 SLT 6.4L OE Incl.Clips
- 2019 Ram 3500 Lone Star Single Rear Wheels 6.7L OE Incl.Clips
- 2019 Ram 3500 Lone Star Single Rear Wheels 6.4L OE Incl.Clips
- 2019 Ram 3500 Lone Star Dual Rear Wheels 6.7L OE Incl.Clips, Optional
- 2019 Ram 3500 Limited Single Rear Wheels 6.4L OE Incl.Clips
- 2019 Ram 3500 Limited Exc.Cab & Chassis, Single Rear Wheels 6.7L OE Incl.Clips
- 2019 Ram 3500 Limited Exc.Cab & Chassis, Dual Rear Wheels 6.7L OE Incl.Clips, Optional
- 2019 Ram 3500 Limited Cab & Chassis 6.7L OE Incl.Clips
- 2019 Ram 3500 Limited 6.4L OE Incl.Clips
- 2019 Ram 3500 Laramie Single Rear Wheels 6.4L OE Incl.Clips
- 2019 Ram 3500 Laramie Longhorn Single Rear Wheels 6.7L OE Incl.Clips
- 2019 Ram 3500 Laramie Longhorn Single Rear Wheels 6.4L OE Incl.Clips
- 2019 Ram 3500 Laramie Longhorn Dual Rear Wheels 6.7L OE Incl.Clips, Optional
- 2019 Ram 3500 Laramie Exc.Cab & Chassis, Single Rear Wheels 6.7L OE Incl.Clips
- 2019 Ram 3500 Laramie Exc.Cab & Chassis, Dual Rear Wheels 6.7L OE Incl.Clips, Optional
- 2019 Ram 3500 Laramie Cab & Chassis 6.7L OE Incl.Clips
- 2019 Ram 3500 Laramie 6.4L OE Incl.Clips
- 2019 Ram 3500 Big Horn Single Rear Wheels 6.7L OE Incl.Clips
- 2019 Ram 3500 Big Horn Single Rear Wheels 6.4L OE Incl.Clips
- 2019 Ram 3500 Big Horn Dual Rear Wheels 6.7L OE Incl.Clips, Optional
- 2019 Ram 3500 Automatic Trans
- 2019 Ram 2500 Tradesman 6.7L OE Incl.Clips
- 2019 Ram 2500 Tradesman 6.4L OE Incl.Clips
- 2019 Ram 2500 Power Wagon 6.4L OE Incl.Clips
- 2019 Ram 2500 Lone Star 6.7L OE Incl.Clips
- 2019 Ram 2500 Lone Star 6.4L OE Incl.Clips
- 2019 Ram 2500 Limited 6.7L OE Incl.Clips
- 2019 Ram 2500 Limited 6.4L OE Incl.Clips
- 2019 Ram 2500 Laramie Longhorn 6.7L OE Incl.Clips
- 2019 Ram 2500 Laramie Longhorn 6.4L OE Incl.Clips
- 2019 Ram 2500 Laramie 6.7L OE Incl.Clips
- 2019 Ram 2500 Laramie 6.4L OE Incl.Clips
- 2019 Ram 2500 Big Horn 6.7L OE Incl.Clips
- 2019 Ram 2500 Big Horn 6.4L OE Incl.Clips
Testimonials
James LoweLooks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Richard WestbrookBought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Luca HarrisTook the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
FAQs
We are open Monday-Friday from 8am-6pm EST
Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403
Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.
We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.
As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.