Hot Cams 8.90 mm Complete Valve Shim Kit - HCSHIM00

The Hot Cams 8.90 mm Complete Valve Shim Kit HCSHIM00 is designed for the KTM models listed below. It provides an application-specific valvetrain or timing-system component while keeping the product tied to the correct manufacturer part number.

This Hot Cams complete valve shim kit covers 8.90 mm diameter valve shims from 1.72-2.60 mm in 0.04 mm increments. It includes 3 shims per size, providing a broad selection for accurate valve-clearance service.

Features

• Complete 8.90 mm valve shim assortment
• Thickness range of 1.72-2.60 mm
• 0.04 mm thickness increments
• 3 shims per size
• 4140 cold-rolled steel construction

Specifications

• Brand: Hot Cams
• Product Type: Shim Kit
• Shim Diameter: 8.90 mm
• Thickness Range: 1.72-2.60 mm
• Thickness Increment: 0.04 mm
• Quantity Per Size: 3
• Hardness: 55-60 HRC
• Manufacturer Part Number: HCSHIM00

Vehicle Fitment

Compatible Make(s): KTM

• 250 SX-F (2005-2025)
• 250 SX-F Factory (2015-2017, 2022, 2024)
• 250 SXS-F (2006-2008)
• 250 XC-F (2007-2025)
• 250 XCF-W (2007-2016)
• 250 XCF-W Six Days (2011)
• 350 EXC-F (2012-2024)
• 350 EXC-F Six Days (2012-2024)
• 350 SX-F (2011-2025)
• 350 XC-F (2011-2025)
• 350 XCF-W (2012-2016, 2020-2022)
• 450 EXC-F (2017-2024)
• 450 EXC-F Six Days (2017-2019, 2023-2024)
• 450 Rally Replica (2016-2024)
• 450 SMR (2008-2014, 2021-2024)
• 450 SX ATV (2008-2010)
• 450 SX-F (2007-2025)
• 450 SX-F Factory (2012-2024)
• 450 XC (2008-2017)
• 450 XC ATV (2008-2010)
• 450 XC-F (2008-2009, 2013-2025)
• 450 XC-W (2015-2016)
• 500 EXC (2014-2016)
• 500 EXC-F (2017-2024)
• 500 EXC-F [510cc] (2025)
• 500 EXC-F Six Days (2020-2024)
• 500 EXC-F Six Days [510cc] (2025)
• 500 XC-W (2014-2016)
• 505 SX ATV (2008-2010)
• 505 SX-F (2008-2009)
• 505 XC-F (2008-2009)
• 500 EXC-F (2017)

Fitment Note: Confirm the exact year, model, engine, valve-train configuration, and required component quantity before ordering. Cam timing, valve lash, installed height, spring clearance, and related engine measurements must be verified during installation where applicable.