Torque Solution HD Turbo Inlet Pipe for 2002-2021 Subaru WRX, STI - Carbon Fiber - 3" Turbo Inlet - TS-SU-881CF-3

Torque Solution HD Turbo Inlet Pipe (Part Number: TS-SU-881CF-3) is built for Subaru WRX 2002-2007, STI 2004-2021. Torque Solution Carbon Fiber HD Hard Turbo Inlet Pipe for the Subaru EJ Engines that utilize a STI or similar intake manifold. Torque Solution's HD inlet is much larger in size and smooths the air flow entering the turbo compared to the restrictive OEM corrugated inlet hose. The package includes all the necessary hardware needed to complete the install whether installing on a car in standard recirculated configuration or a full out build on speed density. Simply choose the configuration based on your turbo inlet size which they are available in 2.4" (OEM), 3" (PTE, Blouch, Garrett) or 84mm/3.3" (FP). Carbon Fiber w/ Torque Solution Logo

Key Features & Specs:

• Smooths and Increases Airflow Entering Turbo
• Material: Eliminates failure prone corrugated rubber hose
• Material: 4-ply Silicone Couplers
• Includes: Includes Silicone Friendly Stainless Steel Hose Clamps
• Compatibility: Direct Fitment
• Includes: Includes All Necessary Hardware To Install
• Installation: Able to be installed Recirculated or as Speed Density
• Warranty: Limited Lifetime Warranty

Fitment:

• 2002-2007 Subaru WRX
• 2004-2021 Subaru STI

Includes:

• Carbon Fiber HD Turbo Inlet (1)
• Silicone Turbo Coupler of your choosing (OEM, 3" or 84mm) (1)
• 1/4 Stainless NPT Plug (1)
• Billet Aluminum 1/4 NPT to 3/8 Straight Barb Fitting (1)
• Billet Aluminum 1/4 NPT to 3/8 90 Degree Barb Fitting (1)
• Billet Aluminum 3/8 NPT to 5/8 90 Degree Barb Fitting (1)
• Billet Aluminum Inlet Recirculation Adapter (1)
• Billet Aluminum Inlet Speed Density Cap (1)
• 80-100mm Wide Width Silicone Safe Worm Gear Clamp (1)
• 70-90mm Wide Width Silicone Safe Worm Gear Clamp (1)
• 70-90mm Standard Width Silicone Safe Worm Gear Clamp (2)
• 25-40mm Standard Width Silicone Safe Worm Gear Clamp (1)
• Install Notes:

Important Notes:

• 1. Coupler will need trimming on both ends to fit. We recommend trimming in approx. 1/8" increments using a worm gear clamp as a guide and a fresh sharp blade. Please be careful and use caution when performing this task.
• 2. We highly recommend using masking tape on the inlet to prevent scratching till you have the coupler perfectly trimmed.
• 3. Install all fittings with a ptfe tape.

California Proposition 65: WARNING: Cancer and Reproductive Harm.