Sold out

VMP Performance HPX 2005+ Ford Slot Style MAF Sensor

Click to zoom in

Load image into Gallery viewer, VMP Performance HPX 2005+ Ford Slot Style MAF Sensor

VMP Performance HPX 2005+ Ford Slot Style MAF Sensor

Name: VMP Performance HPX 2005+ Ford Slot Style MAF Sensor
Brand: VMP Performance
SKU: VMPVMP-INM019
Price: 199.99 USD
Availability: OutOfStock

2 sold in last 8 hours

Brand: VMP Performance

SKU: VMPVMP-INM019

availability: Out of stock

Product Code: Sensors

$199.99

Quantity

Quantity must be 1 or more

Description

Description

Supports 600+ RWHP in a 3 inch tubeRecommended for high horsepower blow-through applications: turbo, Hellion, Procharger, Vortech, Centrifugal, Paxton Easy to install, direct bolt-on application for 2005+ Ford slot style MAF Improved airflow over stock resulting in better driveability, throttle response, and increased horsepower Is your stock Mass Air Flow (MAF) sensor a limiting factor of your high-horsepower build? Designed to read the volume of air flow into your engine, most factory MAF sensors are limited at how much air they can read and they'll peg with increased air flow keeping you from hitting those horsepower goals. Custom calibrated and designed with high horsepower blow-through applications in mind, VMP's HPX MAF sensor is made to keep your engine from pegging by reading larger air volume. While some MAF sensors peg at 400-500 rwhp in a 3 inch tube, the VMP HPX MAF sensor supports 600+ rwhp. In larger housings, this MAF sensor will support even more power. If more range is needed, an extender type device can be used. Estimated HP Range with the VMP HPX sensor 3 inch tube, 300-750 RWHP 3.5 inch tube, 750-900 RWHP 4 inch tube, 1000+ RWHP 4.5inch tube, 1000+ RWHP A direct bolt-on application for the original stock sensor, the VMP HPX MAF is easy to install, and requires no additional modifications. The VMP HPX MAF sensor can be used on any vehicle or computer system that requires a 0-5v input. Built into the MAF sensor is a resistance-based temperature sensor that can optionally be used or left disconnected. We recommend the VMP HPX MAF sensor under any of these situations: the stock MAF sensor is pegging with certain cold air intake kits and MAF housings, cars that are pegging the stock sensor in suck-through (Vortech kits above 10 psi), and cars that are pegging the stock sensor in blow-through even with an extender type device (i.e. MAFIA), such as Procharger kits. The VMP HPX MAF sensor is easy to tune.

This Part Fits:

Year	Make	Model	Submodel
2005-2010	Ford	Mustang	Base
2008-2009	Ford	Mustang	Bullitt
2005-2010	Ford	Mustang	GT
2007-2008	Ford	Mustang	Shelby GT
2007-2010	Ford	Mustang	Shelby GT500
2008-2009	Ford	Mustang	Shelby GT500KR

Looks like I get to be the first review for these guys. Let me start out by saying that I have had 3 other cars of a similar caliber to my GTR serviced/worked on and upgrades installed at other shops and none took the pride and level of detail that these guys did. I wish I could see all the welds on the downpipes and exhaust because it looked like artwork. Their fabricator made sure to send me daily updates and pictures which was also a big deal to me. For being an out of state experience it made it seem more like they were local to me and that I had known them for longer.
James Lowe

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

Bought a Motec and had these guys build the harness and set it up fully. Track car that received the level of attention and detail of a show car while here. Made me feel at home every time I popped in for a visit and always offered to buy me lunch/dinner. I don’t see me shopping anywhere else as they make you feel like your family.
Richard Westbrook

Took the leap of faith on buying a set of their R35 intakes and downpipes because the price was half of anyone elses plus their car hauls a** at the track. Install went smooth and the power seems to be even better than advertised. Cant wait to get tuned in a few weeks. Their shelf tune honestly has to be 600+ hp as I pulled on a Hellcat last night. I see these guys and gals going a long ways if they can get out there and advertise. Customer service is on point paired with BIGGG savings for the winning combo.
Luca Harris

FAQs

sidebar:

We are open Monday-Friday from 8am-6pm EST

Yes, customers located in and around the the Piedmont area are welcome to pick up their items from our retail location during normal business hours. Our address is:
1514 Holebrook
St Suites D-F
Greensboro, NC 27403

Elite Race Fab offers free ground shipping & handling to our retail customers within the lower 48 contiguous United States on most orders totaling $159.99 and higher! Orders under $159.99 will be subject to a nominal $5 Flat shipping charge. Some exceptions and/or exclusions apply, in those scenarios you will be advised of any additional charges in your shopping cart.
In regards to expedited and international shipping each order will need to be quoted on a case by case basis. You can obtain a quote two ways:
- From your shopping cart select "Request a Quote" prior to placing your order. We will review your proposed order and promptly respond with shipping estimates.
- Complete your order ahead of time indicating either expedited or international shipping during the checkout process. We will promptly determine shipping rates for your order and email you for approval and additional payment.
-Give us a call and we can ensure your item is shipped right then, to ensure you have it in time for your deadline.

We have been committed to offering all of our customers the lowest pricing throughout our website day in and day out. We value your business so much that we go a step further than our competitors. We use a third party software that proactively monitors all our competitor's websites/pricing so that we can make adjustments accordingly if needed to have the lowest prices. Thats right, no need to spend hours searching for the lowest prices, as ours will be the lowest.

As far as price matching, we dont want to write a check we cant cash, but we certainly want to earn your business. With that said, we will go above and beyond to match our competitor's pricing when it is needed. Simply email us, click the live contact button, or give us a call and be sure to have a link to our competitor's site and please factor in any shipping and handling their website will be charging. We will then ensure you get the lowest price, and either match or beat their pricing.

Unable to find satisfactory answers ? Contact Support

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

VMP Performance HPX 2005+ Ford Slot Style MAF Sensor

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart

trending

Popular Products

MBRP Universal 3.5 ID to 5 OD Adapter Aluminized - UA2003

MBRP Universal 4 ID. to 5 ID. Adapter Aluminized - UA2004

JBA 1650ST

VMP Performance HPX 2005+ Ford Slot Style MAF Sensor

Customer Reviews

Write a Review

Ask a Question

Testimonials

FAQs

Free S&H Over $159 To Lower 48 . Freight Items Only Exception!

Easy 30-day No Hassle Returns

30,000+ 5 Star Reviews

MFG Fitment Guarantee

Your cart